ZEROLIFT RB Engine Swap Mount Kit for 240sx ! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Zerolift Autolab · 05-03-2010, 05:32 PM

Zerolift RB Engine Mount Kit !!!

The ZEROLIFT Mount Kit is meant to utilize your 240SX Chassis Subframe as well as Motor Mounts unlike other kits that require you to use a specific isolator style mount. This will allow you to expand into solid aftermarket mounts for racing purposes or if you prefer to keep the softer feel you may reuse the stock 240sx motor mounts.

The mounts are made of 3/16” Steel that has been Laser Cut, Brake Bent, and Tig Welded.

The Mounts are Lifetime Warranted against manufacturing flaws I.E. Welds Breaking, Bends Warping BUT are NOT Warranted against Rust or Corrosion caused by wear and tear or the weather.

We have had numerous customers use these in high horsepower applications without any issues.

The Installation of the mount kit not too bad, they consist of 2x Subframe Brackets 2x Engine Brackets 1x Transmission Bracket.

The Mounts are finished in a Satin Black Powder Coat.

Pictures of the product and installation are below :

This mount kit is compatible with RB20, RB25, and RB26.
I have yet to have any customers try them with a RB30

The cost of the RB Mount Kit is $250 + $10 Shipping anywhere in the continental USA.

I can also ship International, please contact me for a shipping quote.

Please feel free to PM or email me with any questions
[email protected]

or call me at 513-874-2508

Thank you,
Robert

WangonwWarrior · 05-03-2010, 05:39 PM

Nice, I will be looking into this

smbonn2005 · 05-03-2010, 06:57 PM

where does the engine sit? Any mods to firewall/hood? does it sit farther back? some info would be awesome as im just about to be buying mounts for my swap, thanks

Zerolift Autolab · 05-03-2010, 08:05 PM

These position the motor a bit farther back.
The firewall will need to have a small spot hammered for Starter Clearance.
And in some cases, a RB25 Transmission will touch the top of the transmission tunnel.

Here is a basic diagram of where the Starter / Bell Housing may touch.

The Oil Pan sits roughly level with the Subframe. A few customers have stated they had oil pan clearance with other mounts, but did not have any issues with these.

The Hood has plenty of clearance, even if you are using Nismo Mounts which are slightly taller than stock.

We also Offer Driveshafts for the conversion - PM Me for Details !

Please let me know if you have any other questions.
Thanks,
Robert

jdm_cameron · 05-03-2010, 08:18 PM

yea thats a good tou put that up there. A friend of mines was wondering the same thing about how it sit...

Zerolift Autolab · 05-04-2010, 08:48 AM

Zerolift Autolab · 05-04-2010, 08:49 AM

Its a smaller picture but - plenty of clearance for larger turbo and aftermarket intake manifold !!

roboticnissan · 05-04-2010, 09:06 AM

lets see some clearance for the steering shaft. my buddy has zerolift mounts and the turbo elbow drags on the steering shaft and totally stops the steering under hard turning. mckinney mounts offer much more adjustibility to have the motor sit in the chassis in a much more optimal position.

Zerolift Autolab · 05-04-2010, 09:17 AM

The majority of the steering shaft clearance issues can be explained by what rubber mounts are being used.
Say that you are using an OEM Mount that came from your original KA or SR, chances are that it has settled / collapsed a little and positions the motor down farther than it should be.
First thing I would look for is if the mount looks like it is literally leaking oil / grease, as they are filled and may have ruptured.

The majority of my customers have installed these using either Nismo or Megan Solid Rubber Mounts.
They are roughly 1/4" taller than a stock Nissan mount.

The reason we developed these to work with an OE Style & Dimension mount is that we have seen way to many failures in the "Isolator" Style mounts

Zerolift Autolab · 05-04-2010, 09:44 AM

If anyone is insterested in a "Package" deal per say
Swap Mounts + Aftermarket Engine Mounts + Driveshaft I can offer a discount!

smbonn2005 · 05-04-2010, 11:17 AM

Nevermind then I'll just get a set of real top hat mounts. no firewall hammering is needed

Zerolift Autolab · 05-04-2010, 11:32 AM

Thanks for bringing that up actually.
The Zerolift kit is not a copy of anyones' mounts.
Almost two years ago we absorbed Ruckus Racing who originally was building the RB Mounts.
We have changed a bit of everything regarding the mounts.
The manufacturing process, geometry, finishing procedures, etc.

And our theory is that a bit of massaging on the firewall is worth the safety of the oil pan.
Please let me know if you have any other questions.

smbonn2005 · 05-04-2010, 10:31 PM

And that is why they are look exactly like Top Hat Performance's RB mounts? .....

Zerolift Autolab · 05-05-2010, 02:31 PM

If you would like to discuss the vast differences, please feel free to call me.
Or since you are located in ohio, you may stop by the shop anytime.
Thank you,
Robert

Zerolift Autolab · 05-05-2010, 09:47 PM

I currently have 24 Sets in stock.
Any orders will be shipped immediately.

At the time you placed your order the mounts were on back order.

I do apologize for any delays on my end, however the product was out of my hands.
I am switching my powder coater for these parts, sadly I got the run around from them as to when the 30 sets I had made would be finished.

In the event of a back order situation, buyers will be notified prior to taking any payment information.

Please let me know if there are any other questions.
Thanks,
Robert

Zerolift Autolab · 05-12-2010, 02:35 PM

Currently 12 Sets left in stock.
More are in manufacturing right now.
Let me know if you need a set.

Thanks,
Robert

Kinugawa turbo · 05-20-2010, 02:00 PM

Quote:

Originally Posted by Zerolift Autolab

Currently 12 Sets left in stock.
More are in manufacturing right now.
Let me know if you need a set.

Thanks,
Robert

Hi Robert,

Its Paul from the UK,

Thanks for the information regarding the RB mounts for my s14a and will let you know when I am ready to order.

Kinugawa turbo · 05-20-2010, 02:23 PM

Quote:

Originally Posted by Zerolift Autolab

Currently 12 Sets left in stock.
More are in manufacturing right now.
Let me know if you need a set.

Thanks,
Robert

Hi Robert,

Can you PM me a picture of the alli propshaft as the link you sent me would'nt work

Cheers,

Paul

Zerolift Autolab · 05-22-2010, 12:42 PM

Paul,
Thank you for the email.

I will reply with a picture of the swap driveshaft.
Thank you,
Robert

Zerolift Autolab · 06-10-2010, 09:40 AM

Next batch of mounts will be available on the 15th !!!

Please let me know if I can help you with a set.
thanks,
Robert

jbballa9876 · 06-15-2010, 09:55 AM

very interested in the install kit here, i would appreciate a price quote of kit + driveshaft (for s13) shipped to 21146

Zerolift Autolab · 06-16-2010, 09:58 AM

Quote:

Originally Posted by jbballa9876

very interested in the install kit here, i would appreciate a price quote of kit + driveshaft (for s13) shipped to 21146

Absolutely ... PM on its way !
Thanks,
Robert

Zerolift Autolab · 06-16-2010, 10:01 AM

Next batch of mounts will be finished today .... $250 FREE SHIPPING thru the end of the month !

Please let me know if I can help.
thanks,
Robert

Zerolift Autolab · 06-30-2010, 05:49 PM

Shipped a few sets to Europe today !
Thank you International Buyers !

Zerolift Autolab · 07-13-2010, 09:07 AM

Thanks for the orders everyone !

zero415 · 07-19-2010, 08:22 PM

can you pm me the price on the mounts + drive shaft. and an rb20 swap? thanks

Zerolift Autolab · 07-20-2010, 11:15 AM

Quote:

Originally Posted by zero415

can you pm me the price on the mounts + drive shaft. and an rb20 swap? thanks

Pm is on its way !
Thanks,
Robert

unaffiliated240sx · 07-23-2010, 10:24 PM

pm'd about a package deal

Zerolift Autolab · 07-26-2010, 02:48 PM

Quote:

Originally Posted by unaffiliated240sx

pm'd about a package deal

Please let me know if I can help wth anything else.

Thanks,
Robert

PS13 DRFT · 09-11-2010, 04:32 PM

Has anyone tried to install this kit with solid mounts? Perhaps Kazama? What does the clearance look like with those?

05-03-2010, 05:32 PM	#1
Zerolift Autolab Post Whore! Join Date: Jan 2008 Location: Fairfield, OH 45014 Age: 38 Posts: 2,804 Trader Rating: (12) Feedback Score: 12 reviews	ZEROLIFT RB Engine Swap Mount Kit for 240sx ! Zerolift RB Engine Mount Kit !!! The ZEROLIFT Mount Kit is meant to utilize your 240SX Chassis Subframe as well as Motor Mounts unlike other kits that require you to use a specific isolator style mount. This will allow you to expand into solid aftermarket mounts for racing purposes or if you prefer to keep the softer feel you may reuse the stock 240sx motor mounts. The mounts are made of 3/16” Steel that has been Laser Cut, Brake Bent, and Tig Welded. The Mounts are Lifetime Warranted against manufacturing flaws I.E. Welds Breaking, Bends Warping BUT are NOT Warranted against Rust or Corrosion caused by wear and tear or the weather. We have had numerous customers use these in high horsepower applications without any issues. The Installation of the mount kit not too bad, they consist of 2x Subframe Brackets 2x Engine Brackets 1x Transmission Bracket. The Mounts are finished in a Satin Black Powder Coat. Pictures of the product and installation are below : This mount kit is compatible with RB20, RB25, and RB26. I have yet to have any customers try them with a RB30 The cost of the RB Mount Kit is $250 + $10 Shipping anywhere in the continental USA. I can also ship International, please contact me for a shipping quote. Please feel free to PM or email me with any questions [email protected] or call me at 513-874-2508 Thank you, Robert __________________ Contact: Phone - 513-874-2508 AIM - ZLR0bert Email - [email protected] Zerolift facebook - http://www.facebook.com/Zerolift Last edited by Zerolift Autolab; 05-03-2010 at 05:53 PM.. Reason: contact info

05-03-2010, 05:39 PM	#2
WangonwWarrior Zilvia FREAK! Join Date: Jan 2008 Location: Amerika24 alabama: Where if your not first..... your last Posts: 1,163 Trader Rating: (15) Feedback Score: 15 reviews	Nice, I will be looking into this __________________

05-03-2010, 08:05 PM	#4
Zerolift Autolab Post Whore! Join Date: Jan 2008 Location: Fairfield, OH 45014 Age: 38 Posts: 2,804 Trader Rating: (12) Feedback Score: 12 reviews	These position the motor a bit farther back. The firewall will need to have a small spot hammered for Starter Clearance. And in some cases, a RB25 Transmission will touch the top of the transmission tunnel. Here is a basic diagram of where the Starter / Bell Housing may touch. The Oil Pan sits roughly level with the Subframe. A few customers have stated they had oil pan clearance with other mounts, but did not have any issues with these. The Hood has plenty of clearance, even if you are using Nismo Mounts which are slightly taller than stock. We also Offer Driveshafts for the conversion - PM Me for Details ! Please let me know if you have any other questions. Thanks, Robert __________________ Contact: Phone - 513-874-2508 AIM - ZLR0bert Email - [email protected] Zerolift facebook - http://www.facebook.com/Zerolift

05-04-2010, 08:48 AM	#6
Zerolift Autolab Post Whore! Join Date: Jan 2008 Location: Fairfield, OH 45014 Age: 38 Posts: 2,804 Trader Rating: (12) Feedback Score: 12 reviews	__________________ Contact: Phone - 513-874-2508 AIM - ZLR0bert Email - [email protected] Zerolift facebook - http://www.facebook.com/Zerolift

05-04-2010, 08:49 AM	#7
Zerolift Autolab Post Whore! Join Date: Jan 2008 Location: Fairfield, OH 45014 Age: 38 Posts: 2,804 Trader Rating: (12) Feedback Score: 12 reviews	Its a smaller picture but - plenty of clearance for larger turbo and aftermarket intake manifold !! __________________ Contact: Phone - 513-874-2508 AIM - ZLR0bert Email - [email protected] Zerolift facebook - http://www.facebook.com/Zerolift

05-03-2010, 06:57 PM	#3
smbonn2005 Zilvia Junkie Join Date: Sep 2009 Location: Bellingham, MA Age: 30 Posts: 315 Trader Rating: (9) Feedback Score: 9 reviews	where does the engine sit? Any mods to firewall/hood? does it sit farther back? some info would be awesome as im just about to be buying mounts for my swap, thanks

05-03-2010, 08:18 PM	#5
jdm_cameron Join Date: Apr 2010 Location: Crestview Florida Age: 31 Posts: 15 Trader Rating: (0) Feedback Score: 0 reviews	yea thats a good tou put that up there. A friend of mines was wondering the same thing about how it sit...

05-04-2010, 09:06 AM	#8
roboticnissan Nissanaholic! Join Date: Mar 2007 Location: SOCAL/NORCAL Age: 32 Posts: 1,867 Trader Rating: (12) Feedback Score: 12 reviews	lets see some clearance for the steering shaft. my buddy has zerolift mounts and the turbo elbow drags on the steering shaft and totally stops the steering under hard turning. mckinney mounts offer much more adjustibility to have the motor sit in the chassis in a much more optimal position. __________________

05-04-2010, 09:17 AM	#9
Zerolift Autolab Post Whore! Join Date: Jan 2008 Location: Fairfield, OH 45014 Age: 38 Posts: 2,804 Trader Rating: (12) Feedback Score: 12 reviews	The majority of the steering shaft clearance issues can be explained by what rubber mounts are being used. Say that you are using an OEM Mount that came from your original KA or SR, chances are that it has settled / collapsed a little and positions the motor down farther than it should be. First thing I would look for is if the mount looks like it is literally leaking oil / grease, as they are filled and may have ruptured. The majority of my customers have installed these using either Nismo or Megan Solid Rubber Mounts. They are roughly 1/4" taller than a stock Nissan mount. The reason we developed these to work with an OE Style & Dimension mount is that we have seen way to many failures in the "Isolator" Style mounts __________________ Contact: Phone - 513-874-2508 AIM - ZLR0bert Email - [email protected] Zerolift facebook - http://www.facebook.com/Zerolift Last edited by Zerolift Autolab; 05-04-2010 at 10:05 AM..

05-04-2010, 09:44 AM	#10
Zerolift Autolab Post Whore! Join Date: Jan 2008 Location: Fairfield, OH 45014 Age: 38 Posts: 2,804 Trader Rating: (12) Feedback Score: 12 reviews	If anyone is insterested in a "Package" deal per say Swap Mounts + Aftermarket Engine Mounts + Driveshaft I can offer a discount! __________________ Contact: Phone - 513-874-2508 AIM - ZLR0bert Email - [email protected] Zerolift facebook - http://www.facebook.com/Zerolift

05-04-2010, 11:17 AM	#11
smbonn2005 Zilvia Junkie Join Date: Sep 2009 Location: Bellingham, MA Age: 30 Posts: 315 Trader Rating: (9) Feedback Score: 9 reviews	Nevermind then I'll just get a set of real top hat mounts. no firewall hammering is needed

05-04-2010, 11:32 AM	#12
Zerolift Autolab Post Whore! Join Date: Jan 2008 Location: Fairfield, OH 45014 Age: 38 Posts: 2,804 Trader Rating: (12) Feedback Score: 12 reviews	Thanks for bringing that up actually. The Zerolift kit is not a copy of anyones' mounts. Almost two years ago we absorbed Ruckus Racing who originally was building the RB Mounts. We have changed a bit of everything regarding the mounts. The manufacturing process, geometry, finishing procedures, etc. And our theory is that a bit of massaging on the firewall is worth the safety of the oil pan. Please let me know if you have any other questions. __________________ Contact: Phone - 513-874-2508 AIM - ZLR0bert Email - [email protected] Zerolift facebook - http://www.facebook.com/Zerolift

05-04-2010, 10:31 PM	#13
smbonn2005 Zilvia Junkie Join Date: Sep 2009 Location: Bellingham, MA Age: 30 Posts: 315 Trader Rating: (9) Feedback Score: 9 reviews	And that is why they are look exactly like Top Hat Performance's RB mounts? .....

05-05-2010, 02:31 PM	#14
Zerolift Autolab Post Whore! Join Date: Jan 2008 Location: Fairfield, OH 45014 Age: 38 Posts: 2,804 Trader Rating: (12) Feedback Score: 12 reviews	If you would like to discuss the vast differences, please feel free to call me. Or since you are located in ohio, you may stop by the shop anytime. Thank you, Robert __________________ Contact: Phone - 513-874-2508 AIM - ZLR0bert Email - [email protected] Zerolift facebook - http://www.facebook.com/Zerolift

05-05-2010, 09:47 PM	#15
Zerolift Autolab Post Whore! Join Date: Jan 2008 Location: Fairfield, OH 45014 Age: 38 Posts: 2,804 Trader Rating: (12) Feedback Score: 12 reviews	I currently have 24 Sets in stock. Any orders will be shipped immediately. At the time you placed your order the mounts were on back order. I do apologize for any delays on my end, however the product was out of my hands. I am switching my powder coater for these parts, sadly I got the run around from them as to when the 30 sets I had made would be finished. In the event of a back order situation, buyers will be notified prior to taking any payment information. Please let me know if there are any other questions. Thanks, Robert __________________ Contact: Phone - 513-874-2508 AIM - ZLR0bert Email - [email protected] Zerolift facebook - http://www.facebook.com/Zerolift

05-12-2010, 02:35 PM	#16
Zerolift Autolab Post Whore! Join Date: Jan 2008 Location: Fairfield, OH 45014 Age: 38 Posts: 2,804 Trader Rating: (12) Feedback Score: 12 reviews	Currently 12 Sets left in stock. More are in manufacturing right now. Let me know if you need a set. Thanks, Robert __________________ Contact: Phone - 513-874-2508 AIM - ZLR0bert Email - [email protected] Zerolift facebook - http://www.facebook.com/Zerolift

05-22-2010, 12:42 PM	#19
Zerolift Autolab Post Whore! Join Date: Jan 2008 Location: Fairfield, OH 45014 Age: 38 Posts: 2,804 Trader Rating: (12) Feedback Score: 12 reviews	Paul, Thank you for the email. I will reply with a picture of the swap driveshaft. Thank you, Robert __________________ Contact: Phone - 513-874-2508 AIM - ZLR0bert Email - [email protected] Zerolift facebook - http://www.facebook.com/Zerolift

06-10-2010, 09:40 AM	#20
Zerolift Autolab Post Whore! Join Date: Jan 2008 Location: Fairfield, OH 45014 Age: 38 Posts: 2,804 Trader Rating: (12) Feedback Score: 12 reviews	Next batch of mounts will be available on the 15th !!! Please let me know if I can help you with a set. thanks, Robert __________________ Contact: Phone - 513-874-2508 AIM - ZLR0bert Email - [email protected] Zerolift facebook - http://www.facebook.com/Zerolift

06-15-2010, 09:55 AM	#21
jbballa9876 Zilvia Junkie Join Date: Mar 2009 Location: Baltimore Posts: 359 Trader Rating: (8) Feedback Score: 8 reviews	very interested in the install kit here, i would appreciate a price quote of kit + driveshaft (for s13) shipped to 21146

06-16-2010, 10:01 AM	#23
Zerolift Autolab Post Whore! Join Date: Jan 2008 Location: Fairfield, OH 45014 Age: 38 Posts: 2,804 Trader Rating: (12) Feedback Score: 12 reviews	Next batch of mounts will be finished today .... $250 FREE SHIPPING thru the end of the month ! Please let me know if I can help. thanks, Robert __________________ Contact: Phone - 513-874-2508 AIM - ZLR0bert Email - [email protected] Zerolift facebook - http://www.facebook.com/Zerolift

06-30-2010, 05:49 PM	#24
Zerolift Autolab Post Whore! Join Date: Jan 2008 Location: Fairfield, OH 45014 Age: 38 Posts: 2,804 Trader Rating: (12) Feedback Score: 12 reviews	Shipped a few sets to Europe today ! Thank you International Buyers ! __________________ Contact: Phone - 513-874-2508 AIM - ZLR0bert Email - [email protected] Zerolift facebook - http://www.facebook.com/Zerolift

07-13-2010, 09:07 AM	#25
Zerolift Autolab Post Whore! Join Date: Jan 2008 Location: Fairfield, OH 45014 Age: 38 Posts: 2,804 Trader Rating: (12) Feedback Score: 12 reviews	Thanks for the orders everyone ! __________________ Contact: Phone - 513-874-2508 AIM - ZLR0bert Email - [email protected] Zerolift facebook - http://www.facebook.com/Zerolift

07-19-2010, 08:22 PM	#26
zero415 Leaky Injector Join Date: Jul 2008 Location: Germany Age: 33 Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	can you pm me the price on the mounts + drive shaft. and an rb20 swap? thanks

07-23-2010, 10:24 PM	#28
unaffiliated240sx Zilvia Member Join Date: Mar 2007 Location: ok Age: 36 Posts: 234 Trader Rating: (2) Feedback Score: 2 reviews	pm'd about a package deal

09-11-2010, 04:32 PM	#30
PS13 DRFT Zilvia Junkie Join Date: Jun 2009 Location: SGV California Age: 34 Posts: 370 Trader Rating: (18) Feedback Score: 18 reviews	Has anyone tried to install this kit with solid mounts? Perhaps Kazama? What does the clearance look like with those?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode