MD S14 full 5 lug conversion!!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Brian W. · 01-11-2009, 07:23 PM

$400.00 obo + shipping.

youll get the rear hubs, front hubs, and front spindles... thats everything you need.

the rotors are a lil rusty but if you want them ill throw them in assuming you want to pay for the extra shipping.

pics:

paypal: [email protected]

email: [email protected]

Local pick up is PREFFERED!!!!!

singlecamslam · 01-11-2009, 09:42 PM

Dont you need the front s14 lower control arm to finish this off? And will you part the front? PM me if you will.

DrifterPaw · 01-12-2009, 01:03 AM

No, if you have a s13 you just need to get some s14 lower ball joints pressured into the s13 lower control arms. Also you need a sleeve for the spindles to work with the stock s13 bolts since the s14 uses bigger bolts in the spindles then the s13 or you can drill out the coilovers hole to be bigger and use the s14 bolts. If you have a s14 already all you need is to take the hubs and wheel bearings off and put them on you car.

Brian W. · 01-12-2009, 11:05 AM

ill throw in some sleeves if you have an S13.

ROUGE180 · 01-12-2009, 11:35 AM

You have a PM and an IM

Brian W. · 01-12-2009, 12:01 PM

Quote:

Originally Posted by ROUGE180

You have a PM and an IM

SOLD to this fella.

01-11-2009, 07:23 PM	#1
Brian W. Zilvia.net Advertiser Join Date: Feb 2004 Location: Baltimore, MD Age: 37 Posts: 1,146 Trader Rating: (8) Feedback Score: 8 reviews	S14 full 5 lug conversion!!!! $400.00 obo + shipping. youll get the rear hubs, front hubs, and front spindles... thats everything you need. the rotors are a lil rusty but if you want them ill throw them in assuming you want to pay for the extra shipping. pics: paypal: [email protected] email: [email protected] Local pick up is PREFFERED!!!!! __________________ www.ma-motorsports.com -Fab work, builds, swaps, dyno tuning

01-11-2009, 09:42 PM	#2
singlecamslam Post Whore! Join Date: Apr 2008 Location: Norcal Posts: 2,531 Trader Rating: (10) Feedback Score: 10 reviews	Dont you need the front s14 lower control arm to finish this off? And will you part the front? PM me if you will. __________________ Nothing says racecar like a stock car with no interior.

01-12-2009, 11:05 AM	#4
Brian W. Zilvia.net Advertiser Join Date: Feb 2004 Location: Baltimore, MD Age: 37 Posts: 1,146 Trader Rating: (8) Feedback Score: 8 reviews	ill throw in some sleeves if you have an S13. __________________ www.ma-motorsports.com -Fab work, builds, swaps, dyno tuning

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-12-2009, 01:03 AM	#3
DrifterPaw Leaky Injector Join Date: Dec 2007 Location: Germantown,MD Age: 37 Posts: 99 Trader Rating: (2) Feedback Score: 2 reviews	No, if you have a s13 you just need to get some s14 lower ball joints pressured into the s13 lower control arms. Also you need a sleeve for the spindles to work with the stock s13 bolts since the s14 uses bigger bolts in the spindles then the s13 or you can drill out the coilovers hole to be bigger and use the s14 bolts. If you have a s14 already all you need is to take the hubs and wheel bearings off and put them on you car.

01-12-2009, 11:35 AM	#5
ROUGE180 Zilvia Addict Join Date: Sep 2007 Location: Potomac, MD Posts: 880 Trader Rating: (5) Rides Gallery: ROUGE180 Feedback Score: 5 reviews	You have a PM and an IM