S14 remove standard boost solenoid when using a EBC? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

phusio · 02-26-2011, 07:28 PM

Hi people. I am curious if i need to maintain my stock boost solenoid when hooking up a electronic boost controller. If i am connecting the greddy solenoid between IC and the actuator , what do i do to the stock boost solenoid hose(see picture, i marked that hose red)? thanks

Uploaded with ImageShack.us

jr_ss · 02-26-2011, 11:53 PM

The stock solenoid can be pulled and thrown in the trash. Leave the connector hanging or tape it to the harness. The vacuum hose needs to be plugged into the new EBC solenoid as this solenoid will replace yours.

02-26-2011, 07:28 PM	#1
phusio Join Date: Jul 2010 Location: netherlands Age: 34 Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	S14 remove standard boost solenoid when using a EBC? Hi people. I am curious if i need to maintain my stock boost solenoid when hooking up a electronic boost controller. If i am connecting the greddy solenoid between IC and the actuator , what do i do to the stock boost solenoid hose(see picture, i marked that hose red)? thanks Uploaded with ImageShack.us

02-26-2011, 11:53 PM	#2
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,052 Trader Rating: (34) Feedback Score: 34 reviews	The stock solenoid can be pulled and thrown in the trash. Leave the connector hanging or tape it to the harness. The vacuum hose needs to be plugged into the new EBC solenoid as this solenoid will replace yours. __________________ My SR20VET

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode