CA << JefeS14 Partout - Z32 Alum Brakes w/BMC - Complete! >> - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

GSXRJJordan · 02-08-2010, 11:59 AM

Continuing with the JefeS14 partout - my full Z32 brake conversion, with aluminum calipers, drilled rotors, stainless steel lines/fittings, and a 17/16" (or 1 1/16" for the math-challenged) brake master cylinder.

Calipers were stripped and painted high-temp gold with the Nissan letters left brushed, and are loaded with Axxis Ultimate pads, great street pad that gets even sweeter with a little heat. Whole setup has fantastic feel and balance, and the pads in the back are awesome with a hydro ebrake (no problems locking sticky 285/30's at freeway speeds).

$500 picked up, $550 shipped.
If you're local, I'll take offers like $495+a burger, etc. I'm not sure how good a shipped burger would be, so you should probably just paypal me.

Dusty garage FTL...

BM57 = 1 1/16"

Plenty of life left in these suckas

Tons left in the rears too!

They look good: *random on-car photo incoming*

GSXRJJordan · 02-08-2010, 04:27 PM

Pending to Kouki819 for install next weekend.

grnmhn · 02-09-2010, 03:20 AM

Where are you located at?

GSXRJJordan · 02-09-2010, 09:53 AM

Thanks for the PM's guys, I'll let everyone know in the order they contacted me if/when these are available.

Quote:

Originally Posted by grnmhn

Where are you located at?

I'm in Southern California, 626 area.

punxva · 02-09-2010, 10:21 AM

if your willing to part out the rear lines i'd take them, but i doubt it if they are already pending. GLWS

Ceepo · 02-09-2010, 11:33 AM

Bump for a bad ass mofo!!! buy his parts!!!

GSXRJJordan · 02-22-2010, 01:22 PM

Sold and installed on Kouki819's car! Enjoy

02-08-2010, 11:59 AM	#1
GSXRJJordan Post Whore! Join Date: May 2006 Location: << 626 >> Posts: 9,135 Trader Rating: (19) Rides Gallery: GSXRJJordan Feedback Score: 19 reviews	<< JefeS14 Partout - Z32 Alum Brakes w/BMC - Complete! >> Continuing with the JefeS14 partout - my full Z32 brake conversion, with aluminum calipers, drilled rotors, stainless steel lines/fittings, and a 17/16" (or 1 1/16" for the math-challenged) brake master cylinder. Calipers were stripped and painted high-temp gold with the Nissan letters left brushed, and are loaded with Axxis Ultimate pads, great street pad that gets even sweeter with a little heat. Whole setup has fantastic feel and balance, and the pads in the back are awesome with a hydro ebrake (no problems locking sticky 285/30's at freeway speeds). $500 picked up, $550 shipped. If you're local, I'll take offers like $495+a burger, etc. I'm not sure how good a shipped burger would be, so you should probably just paypal me. Dusty garage FTL... BM57 = 1 1/16" Plenty of life left in these suckas Tons left in the rears too! They look good: random on-car photo incoming __________________ Jordan Innovations has a new web site! www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com Last edited by GSXRJJordan; 02-08-2010 at 01:39 PM..

02-08-2010, 04:27 PM	#2
GSXRJJordan Post Whore! Join Date: May 2006 Location: << 626 >> Posts: 9,135 Trader Rating: (19) Rides Gallery: GSXRJJordan Feedback Score: 19 reviews	Pending to Kouki819 for install next weekend. __________________ Jordan Innovations has a new web site! www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com

02-09-2010, 11:33 AM	#6
Ceepo Nissanaholic! Join Date: Jan 2008 Location: Cedar City, Utah Posts: 2,007 Trader Rating: (9) Rides Gallery: Ceepo Feedback Score: 9 reviews	Bump for a bad ass mofo!!! buy his parts!!! __________________ TW: http://zilvia.net/f/cars-sale/390459...d9s-coils.html

02-22-2010, 01:22 PM	#7
GSXRJJordan Post Whore! Join Date: May 2006 Location: << 626 >> Posts: 9,135 Trader Rating: (19) Rides Gallery: GSXRJJordan Feedback Score: 19 reviews	Sold and installed on Kouki819's car! Enjoy __________________ Jordan Innovations has a new web site! www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-09-2010, 03:20 AM	#3
grnmhn Join Date: Jan 2009 Location: Texas Age: 50 Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	Where are you located at?