s13 No start "click" noise and Buzzing sound???? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Quiksilvia09 · 01-13-2011, 12:32 AM

Hey guy's

Kinda new to zilvia so dont kill me. :lol:

Anyway's, ever since I Swapped out my Motor to another Ka24de Ive had this problem -Well sorta, I Would click once or twice once in a blue moon-

My Car goes "click" when you try to start the car. It sound's like the Starter engages but not turn over and it has an Odd "buzzing" sound which seem's to be coming from the firewall.

also
One Headlight work but high beams are fine.
and it's the only one that will pop up

My door chime sometime's turns to a clicking sound and my
defroster button light blinks and my Dash light dont work!

Please help!

Quiksilvia09 · 01-13-2011, 12:33 AM

Oh and it's a Bone Stock 91 Hatchback

S-Nation S13 · 01-13-2011, 07:09 AM

you got a lot going on. my car has the same problem when im trying to start, remove you steering column and find you ignition tumbler, look for the harness that comes right off it there should be. 4 wires solder on it. push that piece inward towards your key as you turn the ignition, if that fixes your problem then thats the piece at fault.

as for the other, lemme see what i can do... pm me if you still need help

Quiksilvia09 · 01-13-2011, 09:28 PM

Any Idea's anyone?!?!

s13silvia123 · 01-13-2011, 10:34 PM

bad grounds causes that

RACEBREAD · 01-14-2011, 12:31 AM

the blue relay next to the battery goes bad make a jumper cable and see if your car starts then thats ur problem lol

look around for clutch interlock relay and thats what im talking about and there lots of threads showin similar issues

Leroy_Stickshift · 01-14-2011, 03:26 AM

Quote:

Originally Posted by s13silvia123

bad grounds causes that

truth be told

Felipe · 01-14-2011, 03:44 AM

Quote:

Originally Posted by s13silvia123

bad grounds causes that

if not you need a new starter... not refurbished... not used or like new

Quiksilvia09 · 01-14-2011, 12:20 PM

I dont have a clutch interlock relay lol. I have a slush box

Quiksilvia09 · 01-14-2011, 12:21 PM

Quote:

Originally Posted by Felipe

if not you need a new starter... not refurbished... not used or like new

I have one in my room. Ive swapped it out and still the same thing

And anyone have a diagram of all the grounds?

japslapsilvia · 01-14-2011, 01:45 PM

its ur EGI relay that is buzzing....bc of a lack of gounds....you can find all gounding locations in an FSM

murderrsirenss · 01-14-2011, 01:49 PM

maybe dead cell in your battery, borrow a finds and try to start your car.

Quiksilvia09 · 01-14-2011, 01:58 PM

Quote:

Originally Posted by murderrsirenss

maybe dead cell in your battery, borrow a finds and try to start your car.

Ive tried with jumpercables and it still does it AND I used that battery to run my camry

Where can I get a FSM? They dont show the Grounding locations in my Chiltons

HAWAII · 01-14-2011, 02:14 PM

Starter relay. Like what the guy said above, borrow a friend's, trace where the wire goes and see if all is plugged properly

japslapsilvia · 01-14-2011, 02:35 PM

Quote:

Originally Posted by HAWAII

Starter relay. Like what the guy said above, borrow a friend's, trace where the wire goes and see if all is plugged properly

fwi Auto tranny cars do NOT have a starter "relay"
http://zilvia.net/f/tech-talk/114304...-location.html

Quiksilvia09 · 01-14-2011, 04:47 PM

someone told me to check the starter inhibitor switch. wheres that???

Quiksilvia09 · 01-14-2011, 05:13 PM

Just tried messing with it and it sounds like it's coming from the intake Mani?!?!

when I turn the key it "clicks" but the Buzzing sound stop's

ZenKi_373 · 01-14-2011, 05:50 PM

it clicks? did you check the 100a fuse in the passenger side? mine did a similar thing with a single click...

smoked240 · 01-14-2011, 06:35 PM

Yeah this is lack of grounds. or maybe the starter wire that goes onto the little tab on the solenoid could be shot. or not on. I went to start my car after the swap and it would do the exact same thing,word for word and my starter signal wire(not positive if this is the right term) slipped off.

Quiksilvia09 · 01-14-2011, 06:50 PM

100a? where?!

I only found a 75a

Quiksilvia09 · 01-14-2011, 06:51 PM

Quote:

Originally Posted by smoked240

Yeah this is lack of grounds. or maybe the starter wire that goes onto the little tab on the solenoid could be shot. or not on. I went to start my car after the swap and it would do the exact same thing,word for word and my starter signal wire(not positive if this is the right term) slipped off.

My wire is good Already checked

ZenKi_373 · 01-14-2011, 07:31 PM

its the one that is literally held by bolts to the fuse box. check those 75a and 100a fuses. look very closely!

The240Professor · 01-14-2011, 08:11 PM

Your ignition switch is wearing out and not getting a good connection when you turn the key this is a very common problem with 240's i have had 2 with the same problem i had to wiggle the key around till it started.

S-Nation S13 · 01-14-2011, 08:41 PM

Quote:

Originally Posted by The240Professor

Your ignition switch is wearing out and not getting a good connection when you turn the key this is a very common problem with 240's i have had 2 with the same problem i had to wiggle the key around till it started.

lol i simply just press that connector towards the key, and i complete the connection by doing so, and wa.....la car starts heheh

Quiksilvia09 · 01-15-2011, 04:54 AM

I knoow but I already replaced the ing switch

Quiksilvia09 · 01-15-2011, 04:55 AM

Anyone have a diagram of the engine bay plugs on these car's?? and could a Dirty plug be the root of all the problems?

japslapsilvia · 01-15-2011, 12:50 PM

Quote:

Originally Posted by ZenKi_373

its the one that is literally held by bolts to the fuse box. check those 75a and 100a fuses. look very closely!

OP has s13...they have 75A fuse, its NOT bolted down

Quote:

Originally Posted by Quiksilvia09

Anyone have a diagram of the engine bay plugs on these car's?? and could a Dirty plug be the root of all the problems?

here
Let me google that for you

you will be able to find what you need and throw that stupid Chiltons away.

Quiksilvia09 · 01-16-2011, 10:09 AM

Quote:

Originally Posted by japslapsilvia

OP has s13...they have 75A fuse, its NOT bolted down

here
Let me google that for you

you will be able to find what you need and throw that stupid Chiltons away.

For real it's a piece of crap. it has 3 car's in one book and it barely help's at all.

Oh and thank's for being a smart ass.

Anyway's the FSM is WAYYYYYYYYYYYYYYY better then that Chiltons Piece of crap!

sidewayz240sxtroy · 01-16-2011, 12:19 PM

My car did this and my connections wernt good enough.

Quiksilvia09 · 01-19-2011, 10:45 AM

....now it start's no problem wth!

01-13-2011, 12:32 AM	#1
Quiksilvia09 Join Date: Jan 2011 Location: Spring Hill Age: 30 Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	s13 No start "click" noise and Buzzing sound???? Hey guy's Kinda new to zilvia so dont kill me. :lol: Anyway's, ever since I Swapped out my Motor to another Ka24de Ive had this problem -Well sorta, I Would click once or twice once in a blue moon- My Car goes "click" when you try to start the car. It sound's like the Starter engages but not turn over and it has an Odd "buzzing" sound which seem's to be coming from the firewall. also One Headlight work but high beams are fine. and it's the only one that will pop up My door chime sometime's turns to a clicking sound and my defroster button light blinks and my Dash light dont work! Please help! Last edited by Quiksilvia09; 01-13-2011 at 02:03 PM..

01-13-2011, 09:28 PM	#4
Quiksilvia09 Join Date: Jan 2011 Location: Spring Hill Age: 30 Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	Any Idea's anyone?!?! __________________

01-13-2011, 10:34 PM	#5
s13silvia123 Post Whore! Join Date: May 2006 Location: where waldo is Age: 39 Posts: 3,256 Trader Rating: (16) Feedback Score: 16 reviews	bad grounds causes that __________________ 18g and 20g turbo users click on me http://zilvia.net/f/tech-talk/261219-18g-20g-turbo-users.html

01-14-2011, 12:20 PM	#9
Quiksilvia09 Join Date: Jan 2011 Location: Spring Hill Age: 30 Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	I dont have a clutch interlock relay lol. I have a slush box __________________

01-14-2011, 01:49 PM	#12
murderrsirenss Zilvia Junkie Join Date: Apr 2008 Location: High Point, NC Age: 32 Posts: 354 Trader Rating: (2) Feedback Score: 2 reviews	maybe dead cell in your battery, borrow a finds and try to start your car. __________________ 98 s14.

01-13-2011, 12:33 AM	#2
Quiksilvia09 Join Date: Jan 2011 Location: Spring Hill Age: 30 Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	Oh and it's a Bone Stock 91 Hatchback

01-13-2011, 07:09 AM	#3
S-Nation S13 Post Whore! Join Date: Jan 2008 Location: LAND of the LOST Posts: 4,082 Trader Rating: (92) Feedback Score: 92 reviews	you got a lot going on. my car has the same problem when im trying to start, remove you steering column and find you ignition tumbler, look for the harness that comes right off it there should be. 4 wires solder on it. push that piece inward towards your key as you turn the ignition, if that fixes your problem then thats the piece at fault. as for the other, lemme see what i can do... pm me if you still need help

01-14-2011, 12:31 AM	#6
RACEBREAD Leaky Injector Join Date: Jan 2009 Location: New Mexico Age: 31 Posts: 115 Trader Rating: (0) Feedback Score: 0 reviews	the blue relay next to the battery goes bad make a jumper cable and see if your car starts then thats ur problem lol look around for clutch interlock relay and thats what im talking about and there lots of threads showin similar issues

01-14-2011, 02:14 PM	#14
HAWAII Zilvia Addict Join Date: Jun 2009 Location: Burbank,Ca Age: 45 Posts: 716 Trader Rating: (24) Feedback Score: 24 reviews	Starter relay. Like what the guy said above, borrow a friend's, trace where the wire goes and see if all is plugged properly

01-14-2011, 04:47 PM	#16
Quiksilvia09 Join Date: Jan 2011 Location: Spring Hill Age: 30 Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	someone told me to check the starter inhibitor switch. wheres that??? __________________

01-14-2011, 05:13 PM	#17
Quiksilvia09 Join Date: Jan 2011 Location: Spring Hill Age: 30 Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	Just tried messing with it and it sounds like it's coming from the intake Mani?!?! when I turn the key it "clicks" but the Buzzing sound stop's __________________

01-14-2011, 05:50 PM	#18
ZenKi_373 Zilvia Member Join Date: Aug 2010 Location: El Paso, TX Age: 28 Posts: 221 Trader Rating: (3) Feedback Score: 3 reviews	it clicks? did you check the 100a fuse in the passenger side? mine did a similar thing with a single click...

01-14-2011, 06:35 PM	#19
smoked240 Zilvia FREAK! Join Date: Jun 2010 Location: North Dakota Age: 30 Posts: 1,066 Trader Rating: (4) Feedback Score: 4 reviews	Yeah this is lack of grounds. or maybe the starter wire that goes onto the little tab on the solenoid could be shot. or not on. I went to start my car after the swap and it would do the exact same thing,word for word and my starter signal wire(not positive if this is the right term) slipped off. __________________

01-14-2011, 06:50 PM	#20
Quiksilvia09 Join Date: Jan 2011 Location: Spring Hill Age: 30 Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	100a? where?! I only found a 75a __________________

01-14-2011, 07:31 PM	#22
ZenKi_373 Zilvia Member Join Date: Aug 2010 Location: El Paso, TX Age: 28 Posts: 221 Trader Rating: (3) Feedback Score: 3 reviews	its the one that is literally held by bolts to the fuse box. check those 75a and 100a fuses. look very closely!

01-14-2011, 08:11 PM	#23
The240Professor Banned from the Marketplace Join Date: Dec 2009 Location: never never land Age: 37 Posts: 210 Trader Rating: (4) Feedback Score: 4 reviews	Your ignition switch is wearing out and not getting a good connection when you turn the key this is a very common problem with 240's i have had 2 with the same problem i had to wiggle the key around till it started.

01-15-2011, 04:54 AM	#25
Quiksilvia09 Join Date: Jan 2011 Location: Spring Hill Age: 30 Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	I knoow but I already replaced the ing switch __________________

01-15-2011, 04:55 AM	#26
Quiksilvia09 Join Date: Jan 2011 Location: Spring Hill Age: 30 Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	Anyone have a diagram of the engine bay plugs on these car's?? and could a Dirty plug be the root of all the problems? __________________ Last edited by Quiksilvia09; 01-15-2011 at 12:16 PM..

01-16-2011, 12:19 PM	#29
sidewayz240sxtroy Join Date: Jul 2010 Location: pennsylvania Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	My car did this and my connections wernt good enough.

01-19-2011, 10:45 AM	#30
Quiksilvia09 Join Date: Jan 2011 Location: Spring Hill Age: 30 Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	....now it start's no problem wth! __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode