NV S13 Gauge Cluster Adapters - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*k00laid83* · 03-23-2020, 09:13 AM

Hello Everyone,

I've been selling these harnesses on Facebook S-Chassis, 240sx Owners Club, and KA24DET/KA24DE groups. Just wanted to share this with Zilvia. I have 3 harnesses ready to ship.

My Version 2 - s13 gauge cluster harnesses are done. I?m selling these harnesses for $65 (that covers PayPal fees & shipping in the US). All harnesses have Raychem heat shrink, made with 18-gauge American made primary wiring, and an OEM connectors that mates to the OEM body harness. These harnesses were made to work with USDM vehicles. I do have a RHD front cut harness but unfortunately, I have no way to test as of right now.

Version 2 harnesses will now include indicator lights for door open, brake, oil, check engine, and alt/battery indicator wires, with an additional ground. These harnesses still include everything from Version 1. Every custom cluster harness is labeled for Fuel Signal, Fuel Signal Ground, Water Temp, Tach Signal, Left and Right Turn Signals, High Beam, 12v Constant Power, 12v Keyed Power, Illumination Power, Ground, VSS ECU Signal, VSS Positive, and VSS Negative.

The idea for these harnesses is to have people avoid cutting up their original harness when running aftermarket gauges as their new gauge cluster. It should make things easier for people to tackle their own wiring, just like a car stereo adapter. One thing to remember is our cars are getting older and parts are harder to find intact. I think it?s cool to be able to plug your OEM cluster back in if you want without any issues.

If you're interested in one of these harnesses, please don?t hesitate in contacting me. You can send your $65 payment or I can send a PayPal invoice.

PayPal: [email protected]

Thank you,
Raul

*afishysilvia* · 03-23-2020, 10:08 AM

Bump for quality work, and quality parts. Raul is an absolute pleasure to deal with, still very customer service oriented which says a lot in today’s world.

*k00laid83* · 03-23-2020, 10:21 AM

Quote:

Originally Posted by afishysilvia

Bump got quality work, and quality parts. Raul is an absolute pleasure to deal with, still very customer service oriented which says a lot in today?s world.

Thank you for saying that buddy!

niSm095 · 03-23-2020, 07:32 PM

You know what. This is a really cool idea. Props for bringing it to the market. I have an aftermarket setup now I wouldn't mind cleaning up some. This would be great for it!

*k00laid83* · 03-23-2020, 10:05 PM

Quote:

Originally Posted by niSm095

You know what. This is a really cool idea. Props for bringing it to the market. I have an aftermarket setup now I wouldn't mind cleaning up some. This would be great for it!

Thank you sir. When I started making these I ended up redoing mine. So I totally get it. Let me know if you decide to clean up your wiring with one of these.

*TheRealSy90* · 03-24-2020, 02:01 PM

Think you could make one for converting to the Kouki 180sx cluster?

*k00laid83* · 03-24-2020, 02:43 PM

Quote:

Originally Posted by TheRealSy90

Think you could make one for converting to the Kouki 180sx cluster?

The plan is to make conversion harnesses. Unfortunately, sourcing all the connectors gets tough because Nissan used multiple companies. Essentially, I've continued to research and once I've found everything I need I'll start producing the harnesses for the 180sx. I even have a spare cluster to test on.

e30gangsta · 03-24-2020, 04:58 PM

What about harnesses for hud clusters?

*k00laid83* · 03-24-2020, 05:52 PM

Quote:

Originally Posted by e30gangsta

What about harnesses for hud clusters?

180sx type-x, nx1600, HUD, and s2k conversion harnesses are on the table. Like in my previous response the issue is sourcing the correct connectors. I have plans on making these in the future.

I did have a customer use my version 1 harnesses to help him wire up his nx1600 cluster. These harnesses can help wire in any kind of cluster, even the s2k cluster.

tootall4la · 03-26-2020, 02:07 AM

Quote:

Originally Posted by k00laid83

180sx type-x, nx1600, HUD, and s2k conversion harnesses are on the table. Like in my previous response the issue is sourcing the correct connectors. I have plans on making these in the future.

I did have a customer use my version 1 harnesses to help him wire up his nx1600 cluster. These harnesses can help wire in any kind of cluster, even the s2k cluster.

I need an s2k harness for my s14 make me one!!!!!!

Sent from my iPhone using Tapatalk

*k00laid83* · 03-26-2020, 09:44 AM

Quote:

Originally Posted by tootall4la

I need an s2k harness for my s14 make me one!!!!!!

Sent from my iPhone using Tapatalk

Right now I only have the s13. I picked up an s14 cluster and hopefully soon I can show the s14 some love.

Xaser · 03-26-2020, 11:59 AM

https://prnt.sc/rnci1g ( i cant hotlink)

That's my car a few years ago, dont be like me, now use the Raul Adapters, 15 min vs 4 days weldering catching a tottaly mess.

*k00laid83* · 03-26-2020, 06:03 PM

Quote:

Originally Posted by Xaser

https://prnt.sc/rnci1g ( i cant hotlink)

That's my car a few years ago, dont be like me, now use the Raul Adapters, 15 min vs 4 days weldering catching a tottaly mess.

Thanks bro.

xFix Kaos · 03-26-2020, 06:51 PM

I'm interested, currently making a body harness for my car...but if I can get a plug and play cluster harness....I have a manual speed but I need it to work with my heads up display on the windshield....

Sent from my SM-G960U using Tapatalk

VenomKillz · 03-26-2020, 08:05 PM

Are these supposed to work with JDM clusters on a USDM car?

*brndck* · 03-27-2020, 01:50 PM

Quote:

Originally Posted by TheRealSy90

Think you could make one for converting to the Kouki 180sx cluster?

Quote:

Originally Posted by k00laid83

The plan is to make conversion harnesses. Unfortunately, sourcing all the connectors gets tough because Nissan used multiple companies. Essentially, I've continued to research and once I've found everything I need I'll start producing the harnesses for the 180sx. I even have a spare cluster to test on.

Quote:

Originally Posted by VenomKillz

Are these supposed to work with JDM clusters on a USDM car?

UHHHHHHH.

*k00laid83* · 03-27-2020, 02:43 PM

Quote:

Originally Posted by xFix Kaos

I'm interested, currently making a body harness for my car...but if I can get a plug and play cluster harness....I have a manual speed but I need it to work with my heads up display on the windshield....

Sent from my SM-G960U using Tapatalk

Essentially, this exactly like using a stereo adapter with labeled wires. You can use this to wire what ever cluster you would like. These are not plug in play on the cluster side. It's only plug n play with the body harness. Once, I get to that point I'll make sure to advise the community.

*k00laid83* · 03-27-2020, 02:44 PM

Quote:

Originally Posted by VenomKillz

Are these supposed to work with JDM clusters on a USDM car?

You can use these harnesses to wire in a JDM cluster. You would have every wire labeled to assist you.

*k00laid83* · 03-30-2020, 01:06 PM

I have plenty of harnesses to go around. I have 3 ready to ship, and can make harnesses anytime.

*TheRealSy90* · 03-30-2020, 01:52 PM

Quote:

Originally Posted by brndck

UHHHHHHH.

Well there's a big difference between zenki/chuki jdm clusters, which are plug and play to usdm cars. And the kouki 180sx cluster that I was asking about, which is not.

*k00laid83* · 03-30-2020, 02:59 PM

Quote:

Originally Posted by TheRealSy90

Well there's a big difference between zenki/chuki jdm clusters, which are plug and play to usdm cars. And the kouki 180sx cluster that I was asking about, which is not.

There are differences between the zenki/chuki jdm clusters. But if someone has the plugs that go into the back of the actual gauge cluster, regardless the cluster type. These harnesses will help with the wiring their cluster, regardless if its a jdm, nx1600, type-x, s2k, or aftermarket gauges as your cluster. If you take a look at the first picture you'll see that these harnesses have labeled wires and do not have connector ends on the cluster side. The connectors that plug into the body harness will plug into a usdm car. I hope that helps, currently I am not making conversion harnesses for any type of cluster. Eventually, I hope I can start offering plug and play conversion harnesses. Thanks TheRealSy90 for helping with clearing things up brother.

Mike - E · 03-30-2020, 05:47 PM

this is true quality work, I wonder if there's a way to run a nx1600 cluster with the heads up display projector for speedometer.

*k00laid83* · 03-30-2020, 05:58 PM

Quote:

Originally Posted by Mike - E

this is true quality work, I wonder if there's a way to run a nx1600 cluster with the heads up display projector for speedometer.

Thank you! These harnesses should help with the wiring for that. I know that some people use a Speedo Healer with a GPS module for the s2k cluster in the Honda Community. I suggested to my customer that I wonder if it was possible to use that combination with an nx1600 cluster. I'm sure once that gets figured out I'm sure that the heads up display would work as well. I've been keeping an eye out for an nx1600 cluster to test on.

Mike - E · 03-30-2020, 06:10 PM

Quote:

Originally Posted by k00laid83

Thank you! These harnesses should help with the wiring for that. I know that some people use a Speedo Healer with a GPS module for the s2k cluster in the Honda Community. I suggested to my customer that I wonder if it was possible to use that combination with an nx1600 cluster. I'm sure once that gets figured out I'm sure that the heads up display would work as well. I've been keeping an eye out for an nx1600 cluster to test on.

beautiful, please keep me posted, always wanted to run the NX1600 but don't want to give up my HUD projector as I have the digital HUD cluster.

*TheRealSy90* · 03-30-2020, 07:49 PM

I just realized how cheap your price is on these! Definitely worth more imo.

*k00laid83* · 03-31-2020, 08:50 AM

Quote:

Originally Posted by TheRealSy90

I just realized how cheap your price is on these! Definitely worth more imo.

Yea I know that, I'm just trying to give the best price for products. I'm sure that prices will fluctuate based on how much I pay for supplies. I do appreciate you saying noticing that!

*k00laid83* · 04-03-2020, 08:51 AM

Friday BUMP!

*k00laid83* · 04-04-2020, 11:18 AM

Quote:

Originally Posted by TheRealSy90

I just realized how cheap your price is on these! Definitely worth more imo.

Just like when I have started selling my power steering fittings the prices kept fluctuating. Essentially, with these harnesses the original price has fluctuated to cover material costs, Paypal fees and shipping. New price is $65 free shipping in the USA. I'm trying to be transparent with everyone and provide quality parts at great prices!

CamryOnBronze · 04-07-2020, 07:07 AM

This is awesome! Thanks for bringing another great solution to market.

*k00laid83* · 04-07-2020, 08:46 AM

Quote:

Originally Posted by CamryOnBronze

This is awesome! Thanks for bringing another great solution to market.

Thank you sir!

03-23-2020, 09:13 AM	#1
k00laid83 Premium Member Join Date: Oct 2006 Location: Carson City, NV Age: 38 Posts: 307 Trader Rating: (2) Feedback Score: 2 reviews	S13 Gauge Cluster Adapters Hello Everyone, I've been selling these harnesses on Facebook S-Chassis, 240sx Owners Club, and KA24DET/KA24DE groups. Just wanted to share this with Zilvia. I have 3 harnesses ready to ship. My Version 2 - s13 gauge cluster harnesses are done. I?m selling these harnesses for $65 (that covers PayPal fees & shipping in the US). All harnesses have Raychem heat shrink, made with 18-gauge American made primary wiring, and an OEM connectors that mates to the OEM body harness. These harnesses were made to work with USDM vehicles. I do have a RHD front cut harness but unfortunately, I have no way to test as of right now. Version 2 harnesses will now include indicator lights for door open, brake, oil, check engine, and alt/battery indicator wires, with an additional ground. These harnesses still include everything from Version 1. Every custom cluster harness is labeled for Fuel Signal, Fuel Signal Ground, Water Temp, Tach Signal, Left and Right Turn Signals, High Beam, 12v Constant Power, 12v Keyed Power, Illumination Power, Ground, VSS ECU Signal, VSS Positive, and VSS Negative. The idea for these harnesses is to have people avoid cutting up their original harness when running aftermarket gauges as their new gauge cluster. It should make things easier for people to tackle their own wiring, just like a car stereo adapter. One thing to remember is our cars are getting older and parts are harder to find intact. I think it?s cool to be able to plug your OEM cluster back in if you want without any issues. If you're interested in one of these harnesses, please don?t hesitate in contacting me. You can send your $65 payment or I can send a PayPal invoice. PayPal: [email protected] Thank you, Raul __________________ Facebook or Instagram:@tightfitfab Email: [email protected] Check Us Out At: www.tightfitfab.com Last edited by k00laid83; 04-04-2020 at 10:57 AM.. Reason: Edited price to include accurate shipping costs

03-23-2020, 10:08 AM	#2
afishysilvia Premium Member Join Date: Jan 2010 Location: Cali Posts: 3,372 Trader Rating: (30) Rides Gallery: afishysilvia Feedback Score: 30 reviews	Bump for quality work, and quality parts. Raul is an absolute pleasure to deal with, still very customer service oriented which says a lot in today’s world. __________________ Dont be a pussy...Leave your name

03-24-2020, 04:58 PM	#8
e30gangsta Zilvia Junkie Join Date: Oct 2013 Location: Savannah Age: 36 Posts: 558 Trader Rating: (4) Feedback Score: 4 reviews	What about harnesses for hud clusters? __________________ Need aftermarket parts? PM or DM me competitive pricing! [email protected]

03-26-2020, 11:59 AM	#12
Xaser Zilvia Junkie Join Date: Apr 2012 Location: Arg. Posts: 311 Trader Rating: (0) Feedback Score: 0 reviews	https://prnt.sc/rnci1g ( i cant hotlink) That's my car a few years ago, dont be like me, now use the Raul Adapters, 15 min vs 4 days weldering catching a tottaly mess. __________________ https://www.instagram.com/200sx_type_x/

03-26-2020, 08:05 PM	#15
VenomKillz Zilvia Junkie Join Date: Apr 2012 Location: Riverside, Ca Posts: 328 Trader Rating: (5) Feedback Score: 5 reviews	Are these supposed to work with JDM clusters on a USDM car? __________________

03-23-2020, 07:32 PM	#4
niSm095 Zilvia FREAK! Join Date: Mar 2003 Location: Western PA Age: 36 Posts: 1,200 Trader Rating: (14) Feedback Score: 14 reviews	You know what. This is a really cool idea. Props for bringing it to the market. I have an aftermarket setup now I wouldn't mind cleaning up some. This would be great for it!

03-26-2020, 06:51 PM	#14
xFix Kaos Zilvia Junkie Join Date: Mar 2010 Location: PA Age: 31 Posts: 359 Trader Rating: (9) Feedback Score: 9 reviews	I'm interested, currently making a body harness for my car...but if I can get a plug and play cluster harness....I have a manual speed but I need it to work with my heads up display on the windshield.... Sent from my SM-G960U using Tapatalk

03-30-2020, 01:06 PM	#19
k00laid83 Premium Member Join Date: Oct 2006 Location: Carson City, NV Age: 38 Posts: 307 Trader Rating: (2) Feedback Score: 2 reviews	I have plenty of harnesses to go around. I have 3 ready to ship, and can make harnesses anytime. __________________ Facebook or Instagram:@tightfitfab Email: [email protected] Check Us Out At: www.tightfitfab.com

03-30-2020, 05:47 PM	#22
Mike - E Zilvia Junkie Join Date: Aug 2011 Location: BX BABY Posts: 497 Trader Rating: (40) Feedback Score: 40 reviews	this is true quality work, I wonder if there's a way to run a nx1600 cluster with the heads up display projector for speedometer. __________________ IG: PICTUREMIKEYROLLIN

04-03-2020, 08:51 AM	#27
k00laid83 Premium Member Join Date: Oct 2006 Location: Carson City, NV Age: 38 Posts: 307 Trader Rating: (2) Feedback Score: 2 reviews	Friday BUMP! __________________ Facebook or Instagram:@tightfitfab Email: [email protected] Check Us Out At: www.tightfitfab.com

04-07-2020, 07:07 AM	#29
CamryOnBronze Post Whore! Join Date: Oct 2008 Location: MI Age: 35 Posts: 3,913 Trader Rating: (131) Rides Gallery: CamryOnBronze Feedback Score: 131 reviews	This is awesome! Thanks for bringing another great solution to market. __________________ CamryOnBronze.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode