blueshark123

I personally had problems with wiring specialties but that was a few years back when heavy throttle was around. what a pain that cost me. But i hear good things as of late, so i hope thats still not the case.

CamryOnBronze

Sorry, didn't mean to make the seem solely directed at you. I wasn't completely sure what you meant without hearing more details. I think people sometimes expect parts like this to be on the shelf and at their door two days after they press the order button, forgetting that these are usually small companies that don't have the capital or manpower to keep something like this in stock at all times.

I for sure agree though, didn't mean to make it sound like I was ragging on you specifically.

__________________

CamryOnBronze.com

Hoffman5982

Lol gotcha, sorry for coming back as defensive.

I completely agree. The whole BallerBolts ordeal a few weeks back was a perfect example.

The ONLY reason I was upset with WS is because he told me it'd be done at the end of the week when in reality it was about 2-3 months later. With that said, What I received was exactly what I ordered. Top notch quality and literally took under 30 minutes to install. It's good to not have to worry about old brittle wires

__________________

newslidz

I have delt with cb and have had them forget to send stuff of mine. and its a call and follow up sorta thing until you receive it. there are some people like CamryOnBronze that wont deal with many problems because its like freaking toretto on f&f when your car is out its golden and everyone pours in to get what you have.

__________________

JUST A RED TOP SR

tinys s14

Got my wiring done for my rb by yuri... Came out official. +1 for worrying specialties.. I also got a couple parts from chase bays n I def regret buying some of their way overpriced stuff.

__________________

low n slow

It took me three months to get my Chase Bays harness, all the while they were telling me it would be shipped out in the next few days. When I finally did recieve it I hooked everything up and my car ran like a fresh load of dog shit on a hot summer day. I thought, 'no way it could be the harness', and proceeded to check and double-check everything on my swap. Talking to a friend a local meet he told me he bought a Chase Bays harness and had similar problems until he realized the MAF was pinned wrong. Chase Bays pinned his MAF on the wrong three pins (wires were pinned on the left 3 slots rather than the right). So I decided to check my harness. Sure enough two of the wires on my MAF were backwards. Repinned them and she fired right up and drove off into the sunset! What a headache that was after resetting my timing twice, checking multiple MAF's, etc. Funny that they did the same thing to another locals harness.

I had also ordered the Chase Bays fuel lines. The fuel filter I had received had a cracked flare fitting so I sent Chase an e-mail. He assured me the filter would be in the mail and on the way soon. That was 3 weeks ago, I have since sent a few e-mails and received no response. Classy guys....

sexcii-zenki

i want my harness made by jordan inno def lemme know how their customer service is and turn around time... since WS dont make my harness and chasebay too pricey...

Chase Bays

Low N slow email me directly [email protected] your filter & line shipped last friday. Chase is in and out of the office so much and his tasks require him away from his desk a lot but I'm always here to answer questions and fix problems like these.

It gets pretty crazy around here trying to answer every phone call and email in a split second, we are rapidly a growing business and sometimes our suppliers are the ones not keeping up. I can assure all of you I work with a sense of urgency. We have gotten more circuit boards for our CAMI research board to ensure that our harnesses are triple checked. Our harnesses are all 100% hand made so there have been some mistakes in the past. I believe with any product from Chase Bays Harnesses to iPhone's, this is the case.

What everyone has to remember is our quality control from functionality to aesthetics has a great amount of attention to detail, start to finish. We don't have our harnesses outsourced to a manufacturer and in turn you get a harness made exactly for your car and your motor, made by enthusiasts like yourself. People who build it as if they were building it for their car. This is such an important thing to us, and I believe it will make Chase Bays a lasting company.

Turn around time can differ, we have so many different options and harnesses. If we have to source out a core harness for you if you don't have one (if your harness requires a core) We've set a new system in recently to be 100% better about letting our customers know to exactly where there harness production stands, to the put of annoying you

If you have any questions or need anything else let me know.
Thanks,
-Logan


Logan Brewer, Sales Manager
Birmingham, AL | (205)623-2188
Chase Bays, Inc
[email protected]
Chase Bays, Inc - Welcome to Chase Bays specializing in Custom Wiring Harnesses and AN Fittings
Welcome to Facebook - Log In, Sign Up or Learn More
Chase Bays (@ChaseBays) on Twitter

__________________

new47416

Who is that best at s13 swap 2jz-gte engine harness? i'm not worry about the price!

Ramonesfreak2010

Two of my friends got the Chase Bay harness for their SR and both of them had their maf connector pinned incorrectly making them run super rich and not run properly. Hopefully they fix that issue...

I had my harness done by Taylor Durdan.

S14Driftr91

I got my harness from WS.. called yury up one day and drove out to his house the next. He's an awesome guy and if you ever need help with a question or have a problem he's super easy to get a hold of which is really great because getting through to some companies is nearly impossible. The harness is loomed nicely and looks amazing. Only problem I had was that a few branches off the main line were taped too high so I had to re-tape it. Like people have said if you're going for oem look then WS is the way to go. I haven't heard much about the CB harness although I do love that nylon or whatever its called, loom job

Here's some pictures of mine when I first got it.

__________________
www.allthingsproper.com

turbociv910

chase bays

__________________
www.carolinadyno.com
s13 LSx turbo drag car- 1.42 60 ft, 6.32 1/8

sexcii-zenki

check out on here i met this guy in person, all he does is 1/2jz swaps into any thing u can imagine...im pretty sure alot of u guys seen this thread but this dude is does clean ass amazing work!!!

http://zilvia.net/f/tech-talk/418401...50z-build.html


the pix below shows a z33 2jz hes finishing and his personal rx7 2jz

S14DOOD

A buddy of mine has a CB harness in his civic hatch and has alot of problems out of it. I had used rywire before on a harness and loved it never had any problems out of it at all. My buddy is still using the rywire harness.

thenooblet

I have a ChaseBays harness for my LS6 and it's top notch. They told me it would take about 3-4 weeks to make and I got it in about 2 1/2. But like someone said they're customer service could be better..

So +1 for ChaseBays from me. No experience with WS

__________________

blueshark123

I have seen alot of nice work from rywire, but I never really seen anything besides honda stuff

jlmillionaire

does wiring specailties use china made plugs

89JDM240sx

I have the WSP harness for my Rb25 and very happy with it... I was real happy with because their customer service was good and delivery was fast

__________________
Boost makes me sooooooo happy!

JoshGentry

I have a WSP harness for my rb25 S13. Very good quality. And if you're not tech savvy, they give you VERY detailed instructions. They also know their stuff. I called them a few times to figure out which wires are which for certain things. Have pen and paper ready because they will tell you without hesitation. Good stuff.

jlmillionaire

Thanks guys im gonna get the lowering harness from yury too i might as well hes gonna hook me up anyways!!!

doublestitch180

I would be EXTREMELY careful purchasing anything from CB.

Jeff Jordan is the only guy you'll need to go to for just about anything from just a simple wiring
harness to full on chassis/engine electrical systems from scratch. Very familiar with the
s-chassis and others as well.

Oh yeah...
his harness actually work the first time!

PLAYERO_LOKO

i've gone 5 1/2 months waiting on jeff to finish my damn harness to which i also gave him a 700 down payment and now he wont even answer any calls nor emails anymore!!!

worst guy in the world when it comes to producing, i've gotten nothing but empty promises from him and his staff... i highly recommend that you DONT go with jordan innovations at all! but if you wanna go thru the pain im in right now then by all means.

PLAYERO_LOKO

i wish i had gone with Yuri... now due to jordan innovations im screwed out of my LS2 and S13 harnesses! shouldve gone with my gut feeling instead of the fanciness which got me where i am right now. SMDH!

Pblesh85

Ive got a WS harness... or had on my last sr. I blew the motor and replaced it myself with no experience doing this before(aside from swapping engines. just never wired anything up before 100% alone). It was simple and straight forward. But I have had a few intermittent problems that I believe to be from the harness. I do not mean to talk shit or speak as if it is the quality of all of the work they produce. But I was not pleased with it and especially not aesthetically.

Anyway I blew the motor I swapped in after the first one went too. So I needed a running car and was not able to swap in my built sr I was waiting on from my last car. Well I live in tacoma and am friends with Doug and Eric from UPgarage. Eric has said he is not a fan of WS stuff as it always has "extra" connectors and is very non-specific. That is paraphrased a bit and cleaned up. Anyway if you have the access to someone that is capable and experienced. Have them build you a custom one. It will be tailored to your car and only have what you want/need.

Im not sure if anyone has been to UPgarage, but Eric is awesome with wiring and Doug is just awesome. Give them a call if your in the area.

Hope this helped somewhat

__________________

Do you suffer from vaginal dryness...

jrizzo_240lsx

Yury at WS is the man!!

He hooked me up with my LSx swap harness everything was plug and play took me about 45 min to install by my self...no splicing of any wires needed.

__________________
RIP S2K ALEX.....NEVER FORGOTTEN
"Go Big or Go Home"

Sileighty_85

Ive been doing business with Yury for almost 6 years now and have never had an issue with his harnesses. I'm still running a harness he converted for me in 07 still runs great!

__________________
後輪駆動車１番
1989 Built SR GT2871R -363whp
1998 S14 W/RB25- 250ish (For Now)
1986 SR86 - 200ish
1990 R32 GTR - 320hp
Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html
Don't Buy XS-Power or SSAC Shit

fliprayzin240sx

I am using a WS premade harness for my RB25 swap into my S14. I got a couple of gripes about the harness but not that big of a deal. The harness is made to work on both S1 and S2 engines so it has extra plugs to so it's interchangeable between the 2. If you use it for an S1 engine, I'm supposed to cut the S2 plugs and tape the wires up. I just wish Yury would atleast give the option to have those plugs trimmed out prior to mailing it out. I havent chopped mine up, thinking down the road if I ended up parting my setup up, I can sell the harness.

This is probably due to my setup but only other thing (using on an S1 engine) is I wish the coilpack plug off the engine harness, is a tad bit longer and also the o2 sensor plug (probably 3-4 inches longer) to give you an extra slack. This is probably due to me running a Greddy Intake Manifold and routing the harness under the manifold...

__________________

If you think Zilvia has too many assholes...
CLICK HERE!!!

ixfxi

i had no idea thats the same yury from heavy throttle days. thats a name i havent heard in a long time.

good to see he's still around

RedSiBaron

Jeff has been nothing but cooperative with me. He's building me a full chassis harness. This stuff takes time when it's the highest quality and when he does the work himself. What you have to understand is custom work takes time and he has priorities with big clients like d1 and time attack that are not only his primary advertising but also big clients that keep the doors open so he can even offer his services to people like us. He can't make a living making swap harnesses for hard parkers and wannabe drifters. His harnesses use the best materials, and to make it still affordable his profit margin is not high.

Custom parts take time 5 months is nothing, have patience. I've waited a year and a half for a head before. It's the nature of the beast.

fliprayzin240sx

Yup, same same...he didnt exactly dropped off the face of the planet after HT closed shop. Definitely one of the first set of people who brought the SR swap and S-chassis out to the mainstream. They were the first folks that openly posted up a wiring guide for S13 SR swaps, that is still used today.

__________________

If you think Zilvia has too many assholes...
CLICK HERE!!!