Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Chat

Chat General Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 07-31-2020, 05:20 AM   #1
apollister
 
Join Date: Aug 2015
Location: Hawaii
Posts: 37
Trader Rating: (2)
apollister is an unknown quantity at this point
Feedback Score: 2 reviews
schedule 40 sr20det bottom mount mani

Hello everyone Im trying to find a doc race or a full race bottom mount manifold. I have tried to order from many websites but have not been successful. It seems that full race and doc race manis are all discontinued? I a was curious to see if anyones got one theyd sell, or any other suggestion as to whats a good bottom mount manifold (preferably made of sch 40 stainless).

Sent from my SM-G973U1 using Tapatalk
apollister is offline   Reply With Quote
Sponsored Links
Old 07-31-2020, 10:55 AM   #2
burnsauto
Premium Member
 
burnsauto's Avatar
 
Join Date: Dec 2006
Location: 717, PA
Age: 35
Posts: 3,153
Trader Rating: (5)
burnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfection
Feedback Score: 5 reviews
Send a message via AIM to burnsauto
Well before zilvia does...well, what zilvia does. Yes, you are correct. Full Race no longer makes their bottom mount manifold. You can try to post in the WTB section in the marketplace, but chances are going to be slim. A lot of guys run Tomei expreme exhaust manifolds (myself included), without any real issues. There are some other brands out there if you don't want to run ISR, but pickings are a little slim nowadays. If you asked 10-15 years ago, you'd have plenty of options, but once LS' and 1J/2J's took over, the SR market was pushed to the side.

Good luck in you search
__________________
burnsauto is offline   Reply With Quote
Old 07-31-2020, 11:02 AM   #3
SupaDoopa
Post Whore!
 
SupaDoopa's Avatar
 
Join Date: Jan 2010
Location: 隠された意図
Age: 33
Posts: 3,502
Trader Rating: (26)
SupaDoopa is not welcome here anymoreSupaDoopa is not welcome here anymoreSupaDoopa is not welcome here anymoreSupaDoopa is not welcome here anymoreSupaDoopa is not welcome here anymoreSupaDoopa is not welcome here anymoreSupaDoopa is not welcome here anymoreSupaDoopa is not welcome here anymoreSupaDoopa is not welcome here anymoreSupaDoopa is not welcome here anymoreSupaDoopa is not welcome here anymore
Feedback Score: 26 reviews
Send a message via AIM to SupaDoopa
Exactly what Burns said. Now that the V8/I6 options are becoming so much more popular, the SR support is not a massive market anymore. You can try your luck with MazWorx as they'll build you probably whatever you want but you'll pay a premium. Some of the companies you mentioned will also build them on request but do not advertise them. Plasmaman is another manufacturer that comes to mind as well.

Best of luck.
SupaDoopa is offline   Reply With Quote
Old 07-31-2020, 11:50 AM   #4
TheRealSy90
Premium Member
 
TheRealSy90's Avatar
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 30
Posts: 7,679
Trader Rating: (10)
TheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant future
Feedback Score: 10 reviews
SilkRoad offers a long runner stock turbo location manifold built with proprietary 3mm wall Drawn stainless steel tubing, not roll formed like other cheap brands.
__________________
Quote:
Originally Posted by crimsonrockett View Post
Such a good signature.

Last edited by TheRealSy90; 08-28-2020 at 11:05 AM..
TheRealSy90 is offline   Reply With Quote
Old 07-31-2020, 12:01 PM   #5
PoorMans180SX
Zilvia.net Advertiser
 
PoorMans180SX's Avatar
 
Join Date: Nov 2005
Location: Michigan
Age: 33
Posts: 5,430
Trader Rating: (16)
PoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfection
Feedback Score: 16 reviews
Send a message via AIM to PoorMans180SX
Schedule 40 is overkill. If you weld schedule 10 right, it should never break.

Full race makes a top-mount T25 manifold now btw. I think it makes a lot of sense.



https://www.full-race.com/store/borg...22186279296875
__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.
PoorMans180SX is online now   Reply With Quote
Old 07-31-2020, 04:07 PM   #6
burnsauto
Premium Member
 
burnsauto's Avatar
 
Join Date: Dec 2006
Location: 717, PA
Age: 35
Posts: 3,153
Trader Rating: (5)
burnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfection
Feedback Score: 5 reviews
Send a message via AIM to burnsauto
some things never change..lol.

As with any setup, pros and cons need to be measured out for what you need and want out of the car. Going top mount has it's benefits, but it also requires more initial investment to get everything going, while a bottom mount you can install in a weekend without having to buy a downpipe , custom lines, and intercooler piping.

(andy - does that top mount T2 need a custom made downpipe, or does the full-race 3" V Band downpipe work..that is if you're using a B.W. EFR)

A lot of guys go with the Tomei not just because the "cool jdm factor". They are reliable, well designed, and as a big selling point, come with all the oem nissan gaskets and hardware you'll need for the installation. ..If I remember correctly, I think they even come with a mls (multi-layer steel) manifold gasket.

Again, these are all individual choices, based on individual needs. Good luck with the hunt for what you're looking for
__________________
burnsauto is offline   Reply With Quote
Old 07-31-2020, 05:13 PM   #7
tb13
Zilvia Addict
 
tb13's Avatar
 
Join Date: Feb 2014
Location: Arizona ٩( ᐛ )و Subaru Parts Consultant
Age: 26
Posts: 812
Trader Rating: (3)
tb13 is a name known to alltb13 is a name known to alltb13 is a name known to alltb13 is a name known to alltb13 is a name known to alltb13 is a name known to alltb13 is a name known to alltb13 is a name known to alltb13 is a name known to alltb13 is a name known to alltb13 is a name known to all
Feedback Score: 3 reviews
Future Fab makes a super nice stock location manifold, Jon's manifolds are top notch. I had one that was custom built with a Hypertune collector and EWG flange.



https://cdn10.bigcommerce.com/s-fsb9...0.1280.jpg?c=2
__________________
tb13 is offline   Reply With Quote
Old 07-31-2020, 06:00 PM   #8
silverarrow27
Zilvia FREAK!
 
Join Date: Oct 2005
Location: Banning, CA
Posts: 1,428
Trader Rating: (11)
silverarrow27 has much to be proud ofsilverarrow27 has much to be proud ofsilverarrow27 has much to be proud ofsilverarrow27 has much to be proud ofsilverarrow27 has much to be proud ofsilverarrow27 has much to be proud ofsilverarrow27 has much to be proud ofsilverarrow27 has much to be proud ofsilverarrow27 has much to be proud ofsilverarrow27 has much to be proud ofsilverarrow27 has much to be proud of
Feedback Score: 11 reviews
I think the user Vutony has been trying to sell one for longest time. Not sure if he ever sold his. You can check with him.
__________________
1989 240sx XE|2002 Frontier SC CC LB 4wd|2011 Pathfinder LE V8 4wd
silverarrow27 is offline   Reply With Quote
Old 08-02-2020, 11:30 AM   #9
pacotaco345
Zilvia FREAK!
 
pacotaco345's Avatar
 
Join Date: Jan 2010
Location: SoCal/Ft Worth TX
Age: 27
Posts: 1,549
Trader Rating: (5)
pacotaco345 has a reputation beyond reputepacotaco345 has a reputation beyond reputepacotaco345 has a reputation beyond reputepacotaco345 has a reputation beyond reputepacotaco345 has a reputation beyond reputepacotaco345 has a reputation beyond reputepacotaco345 has a reputation beyond reputepacotaco345 has a reputation beyond reputepacotaco345 has a reputation beyond reputepacotaco345 has a reputation beyond reputepacotaco345 has a reputation beyond repute
Feedback Score: 5 reviews
schedule 40 sr20det bottom mount mani

http://xs-power.com/nissan-turbo-manifolds-20.htm

I run this sched 40 manifold from XS-Power. It?s not as pretty as the doc race/full race units, but at less than half the cost of either one I really can?t complain.




Sent from my iPhone using Tapatalk
__________________
pacotaco345 is offline   Reply With Quote
Old 08-04-2020, 05:38 PM   #10
TheRealSy90
Premium Member
 
TheRealSy90's Avatar
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 30
Posts: 7,679
Trader Rating: (10)
TheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant future
Feedback Score: 10 reviews
Quote:
Originally Posted by pacotaco345 View Post
http://xs-power.com/nissan-turbo-manifolds-20.htm

I run this sched 40 manifold from XS-Power. It?s not as pretty as the doc race/full race units, but at less than half the cost of either one I really can?t complain.
This is also the exact same manifold that ISR sells as their "V3 Sch40 manifold". They just change the brand plate to an ISR plate and re sell it for twice as much.
__________________
Quote:
Originally Posted by crimsonrockett View Post
Such a good signature.
TheRealSy90 is offline   Reply With Quote
Old 08-04-2020, 06:38 PM   #11
burnsauto
Premium Member
 
burnsauto's Avatar
 
Join Date: Dec 2006
Location: 717, PA
Age: 35
Posts: 3,153
Trader Rating: (5)
burnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfection
Feedback Score: 5 reviews
Send a message via AIM to burnsauto
Those sneaky little bitches!
__________________
burnsauto is offline   Reply With Quote
Old 08-04-2020, 06:47 PM   #12
S14rebuild
BANNED
 
Join Date: May 2019
Location: Florida-FAIL
Posts: 2,497
Trader Rating: (8)
S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild
Feedback Score: 8 reviews
like back in the day off ssauto chrome.....shits was the same for all ebay names and cxracing..just swap the name, change the price same garbage
S14rebuild is offline   Reply With Quote
Old 08-06-2020, 04:25 PM   #13
apollister
 
Join Date: Aug 2015
Location: Hawaii
Posts: 37
Trader Rating: (2)
apollister is an unknown quantity at this point
Feedback Score: 2 reviews
Thanks everyone on your inputs I really appreciate it.

Sent from my SM-G973U1 using Tapatalk
apollister is offline   Reply With Quote
Old 08-07-2020, 09:34 AM   #14
s13silvia123
Post Whore!
 
s13silvia123's Avatar
 
Join Date: May 2006
Location: where waldo is
Age: 39
Posts: 3,256
Trader Rating: (16)
s13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfection
Feedback Score: 16 reviews
Quote:
Originally Posted by S14rebuild View Post
like back in the day off ssauto chrome.....shits was the same for all ebay names and cxracing..just swap the name, change the price same garbage
true, same shit different names. same old garbage that all the dumbasses think they are quality LMAO
__________________
18g and 20g turbo users click on me
http://zilvia.net/f/tech-talk/261219-18g-20g-turbo-users.html

s13silvia123 is offline   Reply With Quote
Old 08-07-2020, 12:03 PM   #15
PoorMans180SX
Zilvia.net Advertiser
 
PoorMans180SX's Avatar
 
Join Date: Nov 2005
Location: Michigan
Age: 33
Posts: 5,430
Trader Rating: (16)
PoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfection
Feedback Score: 16 reviews
Send a message via AIM to PoorMans180SX
After talking with Jon at FutureFab, I ordered one of his manifolds, hah. Pumped for cool sounds.
__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.
PoorMans180SX is online now   Reply With Quote
Old 08-07-2020, 01:40 PM   #16
brndck
Premium Member
 
brndck's Avatar
 
Join Date: Jun 2003
Location: torrance, ca
Age: 39
Posts: 12,407
Trader Rating: (129)
brndck is close to perfectionbrndck is close to perfectionbrndck is close to perfectionbrndck is close to perfectionbrndck is close to perfectionbrndck is close to perfectionbrndck is close to perfectionbrndck is close to perfectionbrndck is close to perfectionbrndck is close to perfectionbrndck is close to perfection
Feedback Score: 129 reviews
Send a message via AIM to brndck
honestly the newer ISR stuff appears to be much higher quality (manifolds at least, I still wouldn't use their arms)

I got one for the KA-t vert I raffled off, to replace a cracked and beaten old one, and the ISR one was very beefy, perfect fit, welds all look consistent and have good penetration anywhere I can see inside.
https://www.enjukuracing.com/product...RoCYcUQAvD_BwE
a while back, I ended up with one of the Gent5 manifolds FRSport had for sale. Ended up selling it to Jay from Realize and it sounds great on his car. So far zero issues with it either. Kinda wish i'd kept it (still, 0/10 do NOT recommend anyone try to order ANYTHING from FRSport)
https://frsport.com/gent5-g1101-exha...-s13-14-15-rwd

also, sch40 is only 3.556mm thickness at 42mm OD, the gent5 is 2.0mm thickness.
Have you had experience with runners breaking in the past?
__________________

http://outslidersandsmokeproduce.blogspot.com/
Quote:
Originally Posted by Mannykiller View Post
it'll fit JANK.. and no one likes Jank except Broke ass zilvians.
brndck is offline   Reply With Quote
Old 08-11-2020, 11:41 AM   #17
blackmags91
Zilvia Member
 
Join Date: Sep 2010
Location: Phoenix, AZ
Posts: 225
Trader Rating: (1)
blackmags91 is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by PoorMans180SX View Post
After talking with Jon at FutureFab, I ordered one of his manifolds, hah. Pumped for cool sounds.
Win.

I was using one of the Tomei stock location manifolds for the longest time that Jon had welded up for me when it cracked (otherwise no complaints)...
Until I ended up going top mount with a Future Fab vband ewg setup. I haven't put many miles on it but I bet it will last forever. And I think it sounds great.

Cool sounds you will have!
blackmags91 is offline   Reply With Quote
Old 08-27-2020, 09:12 PM   #18
PoorMans180SX
Zilvia.net Advertiser
 
PoorMans180SX's Avatar
 
Join Date: Nov 2005
Location: Michigan
Age: 33
Posts: 5,430
Trader Rating: (16)
PoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfection
Feedback Score: 16 reviews
Send a message via AIM to PoorMans180SX
Yep, this is definitely awesome. Craftsmanship is top notch. Should hold the 6258 up admirably and make some cool sounds.



__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.
PoorMans180SX is online now   Reply With Quote
Old 08-27-2020, 10:46 PM   #19
pacotaco345
Zilvia FREAK!
 
pacotaco345's Avatar
 
Join Date: Jan 2010
Location: SoCal/Ft Worth TX
Age: 27
Posts: 1,549
Trader Rating: (5)
pacotaco345 has a reputation beyond reputepacotaco345 has a reputation beyond reputepacotaco345 has a reputation beyond reputepacotaco345 has a reputation beyond reputepacotaco345 has a reputation beyond reputepacotaco345 has a reputation beyond reputepacotaco345 has a reputation beyond reputepacotaco345 has a reputation beyond reputepacotaco345 has a reputation beyond reputepacotaco345 has a reputation beyond reputepacotaco345 has a reputation beyond repute
Feedback Score: 5 reviews
Quote:
Originally Posted by PoorMans180SX View Post
Yep, this is definitely awesome. Craftsmanship is top notch. Should hold the 6258 up admirably and make some cool sounds.




Looks awesome! You?re running an EFR turbo bottom mount? Is that manifold stock location or is it built for an EFR? I ran a 6758 on a tomei manifold a couple years back and had to modify my block to get the exhaust housing to clear lol.


Sent from my iPhone using Tapatalk
__________________
pacotaco345 is offline   Reply With Quote
Old 08-28-2020, 08:18 AM   #20
PoorMans180SX
Zilvia.net Advertiser
 
PoorMans180SX's Avatar
 
Join Date: Nov 2005
Location: Michigan
Age: 33
Posts: 5,430
Trader Rating: (16)
PoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfection
Feedback Score: 16 reviews
Send a message via AIM to PoorMans180SX
Quote:
Originally Posted by pacotaco345 View Post
Looks awesome! You?re running an EFR turbo bottom mount? Is that manifold stock location or is it built for an EFR? I ran a 6758 on a tomei manifold a couple years back and had to modify my block to get the exhaust housing to clear lol.


Sent from my iPhone using Tapatalk
Yep, stock location. The Tomei is well known for putting the turbo closer to the block. You can't run a PSM Cobra downpipe with it for that reason.

An efr will bolt to a stock manifold, so I'm assuming it will be even more open with this one, but we'll see!
__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.
PoorMans180SX is online now   Reply With Quote
Old 08-28-2020, 11:03 AM   #21
TheRealSy90
Premium Member
 
TheRealSy90's Avatar
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 30
Posts: 7,679
Trader Rating: (10)
TheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant future
Feedback Score: 10 reviews
Quote:
Originally Posted by PoorMans180SX View Post
Yep, stock location. The Tomei is well known for putting the turbo closer to the block. You can't run a PSM Cobra downpipe with it for that reason.

An efr will bolt to a stock manifold, so I'm assuming it will be even more open with this one, but we'll see!


I've actually seen a car with tomei manifold and PBM cobra, it fits fine.

If it's stock placement the EFR is going to be extremely close to the block like Pacotaco said, but things can be shaved and modified to clear.
__________________
Quote:
Originally Posted by crimsonrockett View Post
Such a good signature.
TheRealSy90 is offline   Reply With Quote
Old 08-28-2020, 05:47 PM   #22
PoorMans180SX
Zilvia.net Advertiser
 
PoorMans180SX's Avatar
 
Join Date: Nov 2005
Location: Michigan
Age: 33
Posts: 5,430
Trader Rating: (16)
PoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfection
Feedback Score: 16 reviews
Send a message via AIM to PoorMans180SX
I’ll make sure to take pictures and document the fitting when I get everything back.
__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.
PoorMans180SX is online now   Reply With Quote
Old 10-24-2020, 10:32 AM   #23
hellion240sx
Zilvia FREAK!
 
Join Date: Nov 2003
Location: NOLA
Age: 40
Posts: 1,509
Trader Rating: (0)
hellion240sx will become famous soon enoughhellion240sx will become famous soon enoughhellion240sx will become famous soon enoughhellion240sx will become famous soon enough
Feedback Score: 0 reviews
Amazing info in here, thanks guys!
__________________
R.I.P. KAIN. YOU'LL ALWAYS BE BY MY SIDE!
240 addict miata addict
hellion240sx is offline   Reply With Quote
Old 10-26-2020, 07:00 PM   #24
burnsauto
Premium Member
 
burnsauto's Avatar
 
Join Date: Dec 2006
Location: 717, PA
Age: 35
Posts: 3,153
Trader Rating: (5)
burnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfection
Feedback Score: 5 reviews
Send a message via AIM to burnsauto
With some conflicting information on this thread about the cobra downpipe, I asked PBM directly, and they got back to me..

"Our Cobra will not work wit the Expreme manifold because it does slightly relocate the turbo.. The Expreme line of products were meant to work together. Manifold, turbo and outlet pipe, etc.

If you use the Expreme manifold and our downpipe, it will hit the trans. "




well shit.
__________________
burnsauto is offline   Reply With Quote
Old 10-27-2020, 04:43 PM   #25
TheRealSy90
Premium Member
 
TheRealSy90's Avatar
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 30
Posts: 7,679
Trader Rating: (10)
TheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant future
Feedback Score: 10 reviews
Quote:
Originally Posted by burnsauto View Post
With some conflicting information on this thread about the cobra downpipe, I asked PBM directly, and they got back to me..

"Our Cobra will not work wit the Expreme manifold because it does slightly relocate the turbo.. The Expreme line of products were meant to work together. Manifold, turbo and outlet pipe, etc.

If you use the Expreme manifold and our downpipe, it will hit the trans. "




well shit.
And i've seen a PBM cobra on an s13 with Tomei expreme manifold. So take it with a grain of salt.
__________________
Quote:
Originally Posted by crimsonrockett View Post
Such a good signature.
TheRealSy90 is offline   Reply With Quote
Old 10-30-2020, 12:18 PM   #26
burnsauto
Premium Member
 
burnsauto's Avatar
 
Join Date: Dec 2006
Location: 717, PA
Age: 35
Posts: 3,153
Trader Rating: (5)
burnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfection
Feedback Score: 5 reviews
Send a message via AIM to burnsauto
you keep the salt, I'll listen to the guys who make the parts



...so sassy.


We've all seen a lot, but its a downpipe thats over 300 bucks that I don't feel like taking a risk on a non returnable part, especially if the company that makes it says the combination won't work together. I did more digging before I contacted PBM, and its a bit touch and go on weather even other turbo elbows will fit using the expreme manifold. With the guy who used the two parts together, we don't know all the facts. We don't know if he modified things, or if he just lucked out with poor quality control on tomei's end (see: Tomei USA).
__________________
burnsauto is offline   Reply With Quote
Old 11-02-2020, 04:27 PM   #27
TheRealSy90
Premium Member
 
TheRealSy90's Avatar
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 30
Posts: 7,679
Trader Rating: (10)
TheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant future
Feedback Score: 10 reviews
Except we do know, CamryOnBronze posted the info with the same combination. I've also seen it fit without modification. At the very worse you might have to put a slight dent in the pipe like Camry did:
https://zilvia.net/f/showthread.php?t=604573
__________________
Quote:
Originally Posted by crimsonrockett View Post
Such a good signature.
TheRealSy90 is offline   Reply With Quote
Old 11-02-2020, 05:14 PM   #28
burnsauto
Premium Member
 
burnsauto's Avatar
 
Join Date: Dec 2006
Location: 717, PA
Age: 35
Posts: 3,153
Trader Rating: (5)
burnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfectionburnsauto is close to perfection
Feedback Score: 5 reviews
Send a message via AIM to burnsauto
hmm, fair enough. Conflicting information is a bitch when there's money involved. So it's either put a dent in a brand new piece, go custom, or switch manifolds.
__________________
burnsauto is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:55 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™