Nissansota240

Well figured I finally have made enough progress to start a build thread and clutter things up on here.


Purchased this car a little over a year ago in this condition...95' Nissan 240sx SE w/ s13 sr20det





I'll admit I'm not the biggest fan of the kit and the rims but I figured I had them, so I would rock them. :lol:

Car need a few fixes before the coming spring so I sent it out for paint and got this back. . .









Turned out that the paint manufacture had a defect in the paint which caused it to look like shit, so now I get a free respray this winter.

Bought another 240sx before spring came that I had planned on building to start drifting in but, decided I was gonna use this thing, which was probably one of my best decisions.



Car definateley needed spacers because the offset on the rims where nasty.


Well Elko #3 was nearing and I felt I should sign up and get in on the action, with a little pressure for some buddies (Dorf2, Laxrider, and Bunta) we got are shit together and headed out to my first event and pretty much first time sliding the car.





Since that I participated in the rest of the Elko's and Raceway events and had a blast. Few more pics of events. . .








Here are a few clips from my first year drifting





Well after this season I found that a lot of the shit on my car can change, I needed to get rid of a lot of stuff and make a ton of upgrades.

So on to the Build Thread



Started tearing her down, deleting the AC (yep this car had the sr20 with a complete AC system completely installed), plan is to do a complete suspension upgrade, everything from coils, control arms, to subframe.

Some pics..













Plan on tubing the front end of my car so I started to relocate my fuse box, shit that's a lot of work.





Glad I labeled them





Used the stock fuse box still, and will be mounting it here





This is where I am right now, gotta extend the wires to the lower harness, fan, alternator, and starter

Oh yeah and I picked these bitches up



Plan to run this car next year scrapping the ground, caged, and ready to slide.

Pinggg

good start, keep updating!

drftx

yeah good start wish my sr had ac -.- what color is that after you got it painted looks super good

Nissansota240

Thanks, the color is the Nissan Starfire blue that some of the koukis where produced in, I'm getting it painted the same color again.

project_silvia

nice build you got going if you want to get rid of that lip LMK

Jared0934

Damn that color is FRESH you're going to smack yourself when you start getting battlebumps

__________________
1993 240sx "Sil680"

Nissansota240

Zenki lip is staying on her, I'm going back to the slammed stock look with maybe kouki sideskirts if I come across a good pair.

I have been trying to force myself to accept that that is just a risk with drifting and that its a good possibility that she will hit something at some point. But for now I'm going to enjoy its dent less appearance

Nissansota240

Sup guys, small update, but a lil

progress (somewhat).

Had to get rid of one of the parts cars so we took the last of the wiring and the subframe out and loaded it up for scrap. Was about the only way we could think of to get her onto the trailer.



Started cutting out my wheel wells for tubing . .





Started taking my SR apart and one of the exhaust studs snapped so I guess I get to spend more on the motor then I was expecting.

Nissansota240

Another update,

Spent another day in the shop working on the car. . .

Started figuring out the tubs, still got a lot more work to do on them though





Also since I don't have AC anymore I also took the coil out from under the dash so that I can cover up the holes in the engine bay and also just to get rid of things that are not being used anymore.





A few other pics from today. . .




Some of the wiring that I have to fix from the first owners attempt



And so here is where I sit tonight about to start cleaning up the harness.

Nissansota240

Few updates nothing much. .

Got the harness stripped and for the most part gutted, just gotta do the soldering, also its zip tied together so that I can figure out what needs to move around for tucking purposes.





Just got these in the mail also. SPL's baby :green:

Nissansota240

Quick little update, I've been ridiculously busy at work lately so I haven't had time to really work on the car as much as I wanted to. Did this little bit of work about a month a go and hope to have it finished up by the end of this coming weekend. (fingers crossed)







Does anyone got any good recommendations for bondo/filler type material to use for shaving the needless holes in the engine bay, that can stand engine heat and oil/gas pretty good?

Should have more pics after this weekend.

__________________
DLG - DIRTYLOVE

WISH ONE

where in MN are you?

Nissansota240

Just outside of the Twin Cities on the south side. Why?

__________________
DLG - DIRTYLOVE

matt_240sx

I might actually be moving up to Minnesota. It's nice to see that there are some people up there in the car scene.

Nice build!

__________________

laxrider

Looks good sir!

SRSouljah

Do work homie

WISH ONE

I visit Intl' falls every feb. for work, just curious if you were nearby.

Nissansota240

Nope other side of the state, lol

epson1

sam just cut your front end off like i did. tubs are gay.

Irresistible

Starfire blue zenki twin.

__________________
GLEAM//★☆Street Dancer☆★
IG: streetdncr // tumblr: steve-strtdncr

Nissansota240

Finally got some time to do some work this weekend. Chris (buntaMN) and I finally finished welding in the tubs at about 2am on Sunday morning. Just need to do some grinding and filler to make it look sweet.

Nissansota240

Also picked these up the other weekend

OnPoint

bucket seats are the truth.

Nissansota240

Yeah, I look forward to not trying to hold myself in the seat when drifting anymore.

Looking forward to getting the bay done and sending this baby off to have the spoiler removed and her re painted.





Muff Shot

smithrcing17

Sweet build man, I'm almost finished my sr zenki build, wish I had tubs like you though

Nissansota240

Thanks, its been a good project so far.

Tubs are done, covered in some primer till I figure out what color I want to paint my engine bay.





Also finally got my roof spoiler that I've been waiting for since the beginning of the year.



Now I'm just gonna be buying more parts and waiting till it gets back from paint. :green:

OBEEWON

I like your tubs.

__________________

I<3BEWBZ

Those tubs came out real nice!

Nissansota240

Thanks guys, I'm surprised how well they turned out being this was are first set of tubs/metal work other then just making some exhausts pipes.

vipa

hell yeah. what color is going to be done in the engine bay?