Water pump bolts, clutch fan - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Volchok · 09-03-2008, 11:08 AM

Rather novice question...

I recently changed from an electric fan to a clutch fan on my 92 S13, and one of the bolts that hold the water pump pulley on broke while removing it. With the clutch fan attached there is not much thread available for the nut to grab. I haven't removed the water pump yet.

My question is two part: 1.) are the bolts easily replaceable or is it welded to the pulley itself? if so anyone know what size the bolts are? and 2.) is the proper way to attach the clutch fan with the stock bolts? or do most people replace them with a longer bolt.

thanks in advance for any assistance.

ryguy · 09-03-2008, 11:13 AM

The bolts are the stud type bolts, they screw all the way out of the pulley. Unless somebody changed yours, it should have been a nut on a stud. Just get the rest of the nuts off, take the pulley off, and get the rest of the broken stud off with some pliers.

Volchok · 09-03-2008, 12:43 PM

thank you, that is what I was hoping. how bout that second part...is it normal to reuse the stock studs or common to replace with a longer one?

thanks!

japslapsilvia · 09-03-2008, 12:56 PM

when i had mu clutch fan i just re-used the stock studs

blueshark123 · 09-03-2008, 01:00 PM

reuse it.......

Volchok · 09-03-2008, 01:11 PM

cool thanks everyone

ziliva is the best....

projectRDM · 09-03-2008, 01:38 PM

M6x1.0, you can use bolts instead of studs if you want. Either way works fine.

Volchok · 09-03-2008, 01:47 PM

Quote:

Originally Posted by projectRDM

M6x1.0, you can use bolts instead of studs if you want. Either way works fine.

PERFECT! thanks so much I was hoping to get a size so I can pick 'em up prior to removing the old stud.

much appreciated!

surreybc · 09-03-2008, 02:18 PM

Reusing water pump studs: to remove, screw on one nut and then a second nut to hold it in place. turn the inner nut and the stud will come off.
Dont screw the first nut too far down or it will wedge. to screw stud into new pump, screw one nut in and then second nut. Use the outer nut to screw stud in

surreybc · 09-03-2008, 02:24 PM

i forget what they are called but those ratchet wrenches probably work well for those 10mm nuts. they are skinny enough to use. like a normal open end wrench but ratchet in the opposite end.

09-03-2008, 11:08 AM	#1
Volchok Zilvia Junkie Join Date: Sep 2007 Location: las vegas Age: 45 Posts: 374 Trader Rating: (16) Feedback Score: 16 reviews	Water pump bolts, clutch fan Rather novice question... I recently changed from an electric fan to a clutch fan on my 92 S13, and one of the bolts that hold the water pump pulley on broke while removing it. With the clutch fan attached there is not much thread available for the nut to grab. I haven't removed the water pump yet. My question is two part: 1.) are the bolts easily replaceable or is it welded to the pulley itself? if so anyone know what size the bolts are? and 2.) is the proper way to attach the clutch fan with the stock bolts? or do most people replace them with a longer bolt. thanks in advance for any assistance.

09-03-2008, 11:13 AM	#2
ryguy Zilvia FREAK! Join Date: Oct 2006 Location: Chicago Suburbs Age: 32 Posts: 1,544 Trader Rating: (5) Feedback Score: 5 reviews	The bolts are the stud type bolts, they screw all the way out of the pulley. Unless somebody changed yours, it should have been a nut on a stud. Just get the rest of the nuts off, take the pulley off, and get the rest of the broken stud off with some pliers. __________________

09-03-2008, 01:38 PM	#7
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 47 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	M6x1.0, you can use bolts instead of studs if you want. Either way works fine. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-03-2008, 12:43 PM	#3
Volchok Zilvia Junkie Join Date: Sep 2007 Location: las vegas Age: 45 Posts: 374 Trader Rating: (16) Feedback Score: 16 reviews	thank you, that is what I was hoping. how bout that second part...is it normal to reuse the stock studs or common to replace with a longer one? thanks!

09-03-2008, 12:56 PM	#4
japslapsilvia Zilvia FREAK! Join Date: Nov 2007 Location: dallas, TX Age: 38 Posts: 1,244 Trader Rating: (12) Feedback Score: 12 reviews	when i had mu clutch fan i just re-used the stock studs

09-03-2008, 01:00 PM	#5
blueshark123 Post Whore! Join Date: Apr 2006 Location: North Jersey Posts: 5,481 Trader Rating: (55) Feedback Score: 55 reviews	reuse it.......

09-03-2008, 01:11 PM	#6
Volchok Zilvia Junkie Join Date: Sep 2007 Location: las vegas Age: 45 Posts: 374 Trader Rating: (16) Feedback Score: 16 reviews	cool thanks everyone ziliva is the best....

09-03-2008, 02:18 PM	#9
surreybc Zilvia Junkie Join Date: Mar 2008 Location: surrey Posts: 359 Trader Rating: (1) Feedback Score: 1 reviews	Reusing water pump studs: to remove, screw on one nut and then a second nut to hold it in place. turn the inner nut and the stud will come off. Dont screw the first nut too far down or it will wedge. to screw stud into new pump, screw one nut in and then second nut. Use the outer nut to screw stud in

09-03-2008, 02:24 PM	#10
surreybc Zilvia Junkie Join Date: Mar 2008 Location: surrey Posts: 359 Trader Rating: (1) Feedback Score: 1 reviews	i forget what they are called but those ratchet wrenches probably work well for those 10mm nuts. they are skinny enough to use. like a normal open end wrench but ratchet in the opposite end.