GA 180SX front clip parts - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

projectRDM · 09-15-2009, 03:00 PM

**IMPORTANT INFO ON BOTTOM THREAD, SCROLL DOWN IF YOU'RE CONFUSED**

I ended up with the remains of a clip from an install, trying to get rid of some of the parts.
I have the entire rear subframe with VLSD and 5bolt axles, brakes, cables, all arms, and the bigger swaybar. Also have the larger front brakes and all front suspension, tension rods, brackets, etc. All of it is for sale until I decide to junk it, so reply with inquiries soon if you need something. Prices are negotiable but don't bother with lowball offers or expectations to ship 200lb parts across country for free. I figure $200 for the diff and axles, everything else I can work with as long as it's reasonable. Understand it's not worth my time to remove a strut and ship it for $10 when I can scrap it at the recycling yard for $5, so if you're planning on wasting my time, don't.

The entire *FORWARD* interior (this is a clip guys, I don't have rear seats and shit, you do know what a clip is, right?) and sheetmetal is also available, but to make things easier you need to contact my business partner Chad at [email protected] for those requests, I gave him all those parts so my carport doesn't look like shit. Fenders, hood, hinges, bumper, liners, and the dash and all parts are with him, he can answer questions and set you up on that stuff.

Some engine parts may be available too depending on what the customer chooses to upgrade, but that stuff will go up next week. Please don't inquire about anything engine related right now.

epics13 · 09-15-2009, 03:33 PM

do u have these --->

R)PS13 airmix motor - also known as the heater valve motor - located on main a/c vent assembly with heater core
(R)PS13 blower motor resistor box - located in the box that the blower motor blows in to
(R)PS13 sunload / sunlight sensor - located in the dash, kind of a pain to get to
(R)PS13 ambient temperature sensor - located in center console near shift knob
basically i need what ever is needed to do the digital climate control swap on my car
if u dont well thats just my luck, free bump for u

projectRDM · 09-15-2009, 05:25 PM

Quote:

Originally Posted by epics13

do u have these --->

R)PS13 airmix motor - also known as the heater valve motor - located on main a/c vent assembly with heater core
(R)PS13 blower motor resistor box - located in the box that the blower motor blows in to
(R)PS13 sunload / sunlight sensor - located in the dash, kind of a pain to get to
(R)PS13 ambient temperature sensor - located in center console near shift knob
basically i need what ever is needed to do the digital climate control swap on my car
if u dont well thats just my luck, free bump for u

I have the entire digital climate control, the full harness, motors, and all sensors. PM me and we'll discuss it more.

Bushido · 09-15-2009, 11:04 PM

what year is the 180sx that the parts are from?

Bing Bong · 09-16-2009, 12:07 AM

do u have

the 180sx quarter panel glass
the 180sx seats?

projectRDM · 09-16-2009, 02:20 AM

Quote:

Originally Posted by Bing Bong

do u have

the 180sx quarter panel glass
the 180sx seats?

Since when does a front clip come with quarter glass? Or seats for that matter?

Bushido - It's a 1992 180SX.

JDMPowerdS13 · 09-16-2009, 09:20 AM

i am looking for the sub harness for the coolent temp sensor could you help me out?

a-s-silvia · 09-16-2009, 10:51 AM

I need the rhd firewall

projectRDM · 09-16-2009, 11:33 AM

Quote:

Originally Posted by JDMPowerdS13

i am looking for the sub harness for the coolent temp sensor could you help me out?

On the engine? No, it's being used for the swap.

Quote:

Originally Posted by a-s-silvia

I need the rhd firewall

What are you willing to spend? It's a ton of work for me to cut it out, box it, and ship it across country.

projectRDM · 09-16-2009, 02:40 PM

I thought people knew what a 'clip' was, I've been reassured though from the numerous PMs and emails that's not the case.

This is the FRONT half of the car only. Cut just behind the shifter. There are NO doors. NO rear seat. NO tail lights. NO rear bumper. No glass of any kind. The clip came with a subframe because the importers here do it that way, but that's all it came with. Please quit asking about parts you know I don't have.

Secondly, this is a 1992 180SX. It's not a 'Type X' or Aero model. The sheetmetal is the same as a US spec 91-94 240SX, except it has the amber/clear front lights. Everything else is the same. I do NOT have rear aero parts or sideskirts, unless you count the eight inches of sawed off pieces hanging on the fenders. There are no wheels, no aftermarket suspension components, nothing. It is a bone stock clip, completely OE from Japan. Nothing cool or exciting. Just stock, OE parts.

Here is what is still available:

Rear subframe
Aarms
Toe arms
Camber arms
Traction arms
Rear uprights, rear hubs (4lug)
Rear calipers with cables
Front calipers/rotors
Front struts/springs
Front tension rods (good bushings)
Front tension rod brackets
Front LCAs
Front spindles/hubs (4lug)
Front swaybar

Chad has the following parts:

Hood
Hood hinges
Fenders
Bumper cover with lower lip (91-94 style)
Headlights with lids, motors, lens
Fender liners (JDM has the vent on the US driverside)
Dashboard and all associated parts
Center console
Glovebox

So, email or PM about any of this, I'm taking all the metal stuff to the yard next week if it's not sold by then.

09-15-2009, 03:00 PM	#1
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 47 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	180SX front clip parts IMPORTANT INFO ON BOTTOM THREAD, SCROLL DOWN IF YOU'RE CONFUSED I ended up with the remains of a clip from an install, trying to get rid of some of the parts. I have the entire rear subframe with VLSD and 5bolt axles, brakes, cables, all arms, and the bigger swaybar. Also have the larger front brakes and all front suspension, tension rods, brackets, etc. All of it is for sale until I decide to junk it, so reply with inquiries soon if you need something. Prices are negotiable but don't bother with lowball offers or expectations to ship 200lb parts across country for free. I figure $200 for the diff and axles, everything else I can work with as long as it's reasonable. Understand it's not worth my time to remove a strut and ship it for $10 when I can scrap it at the recycling yard for $5, so if you're planning on wasting my time, don't. The entire FORWARD interior (this is a clip guys, I don't have rear seats and shit, you do know what a clip is, right?) and sheetmetal is also available, but to make things easier you need to contact my business partner Chad at [email protected] for those requests, I gave him all those parts so my carport doesn't look like shit. Fenders, hood, hinges, bumper, liners, and the dash and all parts are with him, he can answer questions and set you up on that stuff. Some engine parts may be available too depending on what the customer chooses to upgrade, but that stuff will go up next week. Please don't inquire about anything engine related right now. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com Last edited by projectRDM; 09-16-2009 at 02:35 PM..

09-15-2009, 11:04 PM	#4
Bushido Post Whore! Join Date: Jun 2003 Location: SFL Posts: 3,562 Trader Rating: (10) Feedback Score: 10 reviews	what year is the 180sx that the parts are from? __________________

09-16-2009, 10:51 AM	#8
a-s-silvia Zilvia FREAK! Join Date: Nov 2006 Location: Colorado Age: 34 Posts: 1,295 Trader Rating: (5) Feedback Score: 5 reviews	I need the rhd firewall __________________ [SIGPIC][/SIGPIC]

09-16-2009, 02:40 PM	#10
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 47 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	I thought people knew what a 'clip' was, I've been reassured though from the numerous PMs and emails that's not the case. This is the FRONT half of the car only. Cut just behind the shifter. There are NO doors. NO rear seat. NO tail lights. NO rear bumper. No glass of any kind. The clip came with a subframe because the importers here do it that way, but that's all it came with. Please quit asking about parts you know I don't have. Secondly, this is a 1992 180SX. It's not a 'Type X' or Aero model. The sheetmetal is the same as a US spec 91-94 240SX, except it has the amber/clear front lights. Everything else is the same. I do NOT have rear aero parts or sideskirts, unless you count the eight inches of sawed off pieces hanging on the fenders. There are no wheels, no aftermarket suspension components, nothing. It is a bone stock clip, completely OE from Japan. Nothing cool or exciting. Just stock, OE parts. Here is what is still available: Rear subframe Aarms Toe arms Camber arms Traction arms Rear uprights, rear hubs (4lug) Rear calipers with cables Front calipers/rotors Front struts/springs Front tension rods (good bushings) Front tension rod brackets Front LCAs Front spindles/hubs (4lug) Front swaybar Chad has the following parts: Hood Hood hinges Fenders Bumper cover with lower lip (91-94 style) Headlights with lids, motors, lens Fender liners (JDM has the vent on the US driverside) Dashboard and all associated parts Center console Glovebox So, email or PM about any of this, I'm taking all the metal stuff to the yard next week if it's not sold by then. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com Last edited by projectRDM; 09-17-2009 at 03:55 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-15-2009, 03:33 PM	#2
epics13 Zilvia Junkie Join Date: Feb 2009 Location: New York Posts: 491 Trader Rating: (8) Feedback Score: 8 reviews	do u have these ---> R)PS13 airmix motor - also known as the heater valve motor - located on main a/c vent assembly with heater core (R)PS13 blower motor resistor box - located in the box that the blower motor blows in to (R)PS13 sunload / sunlight sensor - located in the dash, kind of a pain to get to (R)PS13 ambient temperature sensor - located in center console near shift knob basically i need what ever is needed to do the digital climate control swap on my car if u dont well thats just my luck, free bump for u

09-16-2009, 12:07 AM	#5
Bing Bong Leaky Injector Join Date: Aug 2009 Location: Anaheim Hills Age: 31 Posts: 123 Trader Rating: (4) Feedback Score: 4 reviews	do u have the 180sx quarter panel glass the 180sx seats?

09-16-2009, 09:20 AM	#7
JDMPowerdS13 Zilvia Junkie Join Date: Feb 2009 Location: NH Age: 38 Posts: 457 Trader Rating: (9) Feedback Score: 9 reviews	i am looking for the sub harness for the coolent temp sensor could you help me out?