SDS13COUPE

Welcome to my "Get me back to an SR" thread. This setup made great power and was very responsive. I wouldn't be parting this if I hadn't spun a bearing, but I'm getting a good deal for an SR. Most parts were purchased brand new (still got most reciepts) and have less than 3000 miles. Locals in San Diego get priority and I will ship but the BUYER will cover all shipping costs. I dont have pics for all parts since I'm still tearing it apart but I will update in the next few days. This is how the setup looked. Ok, let's get started..

1) KA-T manifold custom built by Eric Anderson at Flawless Rides. All material is schedule 10 and was purchased from Vibrant Performance ::.. This tank of a manifold was built to never break and the merge collector was hand made. This thing hasn't even bronzed all the way and sadly only has about 20 miles on it. It has great clearance for BMC. Sold





2) S14 KA24DE block with fully redone head (head alone cost over $500, still got reciept) Head was decked, shimmed, pressure checked and hot tanked. Motor was never driven on just started and idled with the new head. Also has brand new ARP head studs and the oil pan is tapped for turbo drain. Also has a lightened crank pulley. Slap in some new bearings and you'll be good. Sold




3) PBM Oil filter relocater with Earl's stainless steel lines with shielding to prevent them from rubbing eachother. I used this as the oil feed and for my oil psi sending unit. Worked great and it never leaked. Relocater lines are -10. Oil feed is -3. I also have coolant feed lines (not pictured) from Earls with the shiedling. All lines and fitting were purchased brand new. Sold



Next items aren't pictured.

5) ACT Streetlite chromoly 13lb flywheel and Speed Alliance 4 puck sprung clutch with heavy duty pressure plate 1991-1998 240SX KA24D/KA24DE SPEED ALLIANCE DRIFT SPEC CLUTCH KIT :: Clutch :: Drive Train :: 89-93 240SX Coupe :: Nissan :: Speed Alliance. Broken in for the first 1000 miles properly. Sold
6) Driveshaft shop 1 piece steel driveshaft. Purchased used from track only car. Sold
7) 8mm spark plug wires. Not sure on the brand. Sold
8) 3in. GPSports exhaust. Has some scratches/dings from being on a lowered car. Very quiet. Asking $175
9) Suspension Technique sway bars and endlinks. Never got around to installing them. Asking $180
10) Megan turbo outlet/downpipe. Cracked and needs to be rewelded. Sold
11) Emance tuned ecu. Tuned for 370cc/N62/S15 T28 Sold


Pretty sure I'm missing stuff. All parts are OBO so if you have any questions you can PM me here ( I frequent Zilvia) or text/call at 619-920-1202. Not really looking for any trades but you never know. Show me what you got. Thanks

S-Nation S13

Legit guy vouch for parts..sip Amir

SDS13COUPE

Waddup Ron. Hows the coupe.

All parts are OBO Gonna try and get some more pics today.

soflacoupe

Ship the Ecu to 33024? How much pm me

Loki_S13

can you post pic of the isis fans? and is it easy to conect them? they turn on and off alone or is it dual speed? (sorry dont know much about this but really want it) Shipped to CA 94109 plese.

SDS13COUPE

You can just connect them to a switch. They also have those fan control units that use a thermostat to turn them on.

bombatape

NOOOO.... might hit you up for some stuff

-Isaac

__________________
|boost|
http://zilvia.net/f/traderratings.html?u=96718

w0nderbr3ad

Wanna sell me your oil feed/drain and coolant lines? assuming they fit a t25 too. lmk

simplistek

When I saw the thread, i was thinking SMH... but now that I see you're going back to SR, I'm happy for you bro. I should be getting mine back up and going within the next few months.

__________________
v e r t e x - u s a . c o m

E2EKIELR34

bump for a legit homie!
^if he doesn't get your oil/coolant lines...let me know! haha

__________________

kruked

Stock bottom end?

__________________
I like my bikes how I like my b¡tches...naked!
2014 Triumph Street Triple

Dori90

bump for the big guy..everything is super legit yo!! so dont low ball puckers

SDS13COUPE

Yup. Bottom end was untouched. Once I heard it knocking I shut it down so the crank should be cool. Just replace the bearings.

1on1

free bump for a legit homie!

I wonder what's next...

__________________
instagram

slmdstnc

Interested in the manifold, what kind of flange? pm me

__________________

SDS13COUPE

All pm's have been replied too. Everything is OBO so offer away, the worst I can say is no.

SDS13COUPE

Still got some good stuff here for sale. Shoot me some offers or trades. I also got (4) 5x114.3 17x9 XXR 962's for sale. Looking for 962's in 18x9.5
I can bend the prices some. Let's get this stuff sold guys and gals.

ACT Streetlite chromoly 13lb flywheel and Speed Alliance 4 puck sprung clutch with heavy duty pressure plate 1991-1998 240SX KA24D/KA24DE SPEED ALLIANCE DRIFT SPEC CLUTCH KIT :: Clutch :: Drive Train :: 89-93 240SX Coupe :: Nissan :: Speed Alliance. Broken in for the first 1000 miles properly. Sold

Driveshaft shop 1 piece steel driveshaft. Purchased used from track only car. Sold

3in. GPSports exhaust. Has some scratches/dings from being on a lowered car. Very quiet. Asking $175

Suspension Technique sway bars and endlinks. Never got around to installing them. Asking $180

SDS13COUPE

Here is a new pic with some of the stuff listed above. Bump to the top again.

SDS13COUPE

Bump it up. Need this stuff gone. It's just taking up space. Also got (4) 5 lug 17X9 XXR 962's for sale without tires.

SDS13COUPE

To the top. Got pics of the clutch setup. ACT Chromoly flywheel, Speed Alliance 4 puck sprung clutch with heavy duty pressure plate. Barely has 3000 miles. Clutch pedal feel was good. Grabs smooth.

Vatche

i was in search for a driveshaft for many moons. thank you sir.

__________________
The Ultimate For Sale Thread <> Review Thread

sc ka24e

sell me the lines and ECU already

SDS13COUPE

Sorry Luis. I got a buyer for the whole setup.

SDS13COUPE

Bump it up..Someone grab this stuff. I cant use it anymore. Trades I need are:
-SR trans
-SR clutch setup
-SR radiator
-pretty much anything SR related

SDS13COUPE

All pm's have been replied too. Still got some stuff up for grabs. Need to make space for my SR. Shoot me some offers and if it's reasonable it'll get sold.

-ACT Streetlite chromoly 13lb flywheel and Speed Alliance 4 puck sprung clutch with heavy duty pressure plate 1991-1998 240SX KA24D/KA24DE SPEED ALLIANCE DRIFT SPEC CLUTCH KIT :: Clutch :: Drive Train :: 89-93 240SX Coupe :: Nissan :: Speed Alliance. Broken in for the first 1000 miles properly. Sold

-3in. GPSports exhaust. Has some scratches/dings from being on a lowered car. Very quiet. Asking $175

-S13 Suspension Technique sway bars with poly bushings. Never got around to installing them. Asking $180

-Mizu aluminum radiator for KA24. Sold

Trades Im looking for are:
-SR clutch setup
-SR radiator
-pretty much anything SR related
-Tires (215/40/18)

SDS13COUPE

TTT. Let's make a deal. Flywheel is pending so the clutch is up for grabs by itself. Dont need this other stuff.

SDS13COUPE

ACT flywheel sold. Still got the clutch and other parts. Accepting all reasonable offers so I can clear this stuff out. TTT

SDS13COUPE

Bump TTT. Still got the sway bars and exhaust. Nobody wants em?

San Diego Kouki

Bump, legit ass homie!!!