Z32 BMC help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

nisileighty · 03-14-2017, 05:58 PM

Hi there, I'm doing the Z32 brake conversion on my 1993 240 coupe, and I'm having some trouble with the master cylinder. I went to my local oreillys and picked one up, but it has no Nabco, Tokiko, or Nissan markings on it. I'm aware that it should have these markings to be from an actual Z32 rather than a aftermarket replacement part. Rather than any trademarks, I do have the numbers 30173-AC on the body of it. If anyone could tell me the size of this master cylinder it would be a great help, along with what flair fitting I need for the middle hole. Any help is appreciated. Thanks!

S14kouki805 · 03-14-2017, 06:02 PM

Looks like a generic 15/16 BMC, you wont get an OEM from a parts store.

S14kouki805 · 03-14-2017, 06:03 PM

As far as the center fitting just cut out the old one from your current BMC. Use a dremel and be careful not f*ck it up

nisileighty · 03-14-2017, 06:27 PM

Quote:

Originally Posted by S14kouki805

As far as the center fitting just cut out the old one from your current BMC. Use a dremel and be careful not f*ck it up

Okay, thanks!

03-14-2017, 05:58 PM	#1
nisileighty Zilvia FREAK! Join Date: Feb 2016 Location: Seattle, WA Posts: 1,215 Trader Rating: (4) Feedback Score: 4 reviews	Z32 BMC help Hi there, I'm doing the Z32 brake conversion on my 1993 240 coupe, and I'm having some trouble with the master cylinder. I went to my local oreillys and picked one up, but it has no Nabco, Tokiko, or Nissan markings on it. I'm aware that it should have these markings to be from an actual Z32 rather than a aftermarket replacement part. Rather than any trademarks, I do have the numbers 30173-AC on the body of it. If anyone could tell me the size of this master cylinder it would be a great help, along with what flair fitting I need for the middle hole. Any help is appreciated. Thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-14-2017, 06:02 PM	#2
S14kouki805 Zilvia Addict Join Date: Aug 2014 Location: California Age: 39 Posts: 808 Trader Rating: (5) Feedback Score: 5 reviews	Looks like a generic 15/16 BMC, you wont get an OEM from a parts store.

03-14-2017, 06:03 PM	#3
S14kouki805 Zilvia Addict Join Date: Aug 2014 Location: California Age: 39 Posts: 808 Trader Rating: (5) Feedback Score: 5 reviews	As far as the center fitting just cut out the old one from your current BMC. Use a dremel and be careful not f*ck it up