Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 06-15-2019, 08:32 AM   #1
Vin_Spin_S14
 
Join Date: Mar 2019
Location: Red Bank, NJ
Posts: 17
Trader Rating: (2)
Vin_Spin_S14 is an unknown quantity at this point
Feedback Score: 2 reviews
Weird ecu/voltage issues.

Recently picked up a 1993 S14 silvia K and having some voltage issues. I had a Link ecu installed, as well as full bolt-ons and a fuel system, and everything was running fine till I drove it on some very bumpy roads. The car starts and idles perfectly fine. I have a BTI gauge installed and noticed that out of nowhere low voltage at idle and under load, it seems like the ecu is dropping voltage from 10.8v to 6.4v and restarting. If I am parked I can rev it freely with zero issues and if I baby it around my neighborhood I see zero issues. I did some testing with the key on and I have 12.3v at the battery but I'm only seeing 9.35v at the ecu/BTI gauge, and with the car running I have 14.3v at the battery and 10.8v at the ecu/BTI gauge, checking both pins 49/50 and 59/60. I have no voltage on the ground pins. I belive I've located the ecu relay behind the ecu on the passenger side(left kick panel) and seeing the same voltages on the black teaced with white wire that I believe goes to the ECU power pins in the ECU plug. I'm lost and would appreciate any help or guidance. Thank you all very much!!

1st pic is car is idle roughly 750-850rpm, 2nd is voltage measured at battery shortly afterwards.

Sent from my SM-N960U using Tapatalk
Vin_Spin_S14 is offline   Reply With Quote
Sponsored Links
Old 06-15-2019, 08:59 AM   #2
oewoko
Zilvia Member
 
Join Date: Apr 2002
Location: new jersey
Posts: 154
Trader Rating: (2)
oewoko is an unknown quantity at this point
Feedback Score: 2 reviews
My G was doing something similar. It ended up being a loose ground terminal at the battery. Worth a check.

Sent from my SM-N910V using Tapatalk
oewoko is offline   Reply With Quote
Old 06-15-2019, 09:03 AM   #3
Vin_Spin_S14
 
Join Date: Mar 2019
Location: Red Bank, NJ
Posts: 17
Trader Rating: (2)
Vin_Spin_S14 is an unknown quantity at this point
Feedback Score: 2 reviews
Quote:
Originally Posted by oewoko View Post
My G was doing something similar. It ended up being a loose ground terminal at the battery. Worth a check.

Sent from my SM-N910V using Tapatalk
I did check that after scratching my head. Looked over as many grounds as I could see and all seem good. Thanks

Sent from my SM-N960U using Tapatalk
Vin_Spin_S14 is offline   Reply With Quote
Old 07-19-2019, 04:55 PM   #4
TEN_2nd_BUSTER
 
TEN_2nd_BUSTER's Avatar
 
Join Date: Jul 2019
Location: Southeast, Wisconsin
Posts: 17
Trader Rating: (0)
TEN_2nd_BUSTER is an unknown quantity at this point
Feedback Score: 0 reviews
Yea, my first thought was grounds as well. My car had a fluctuating voltage problem and what fixed mine was adding 2 grounds. I always question batterys no matter what.
TEN_2nd_BUSTER is offline   Reply With Quote
Old 07-22-2019, 02:53 PM   #5
Jfornachon
Zilvia Junkie
 
Join Date: Dec 2011
Location: Caldwell Idaho
Posts: 300
Trader Rating: (3)
Jfornachon is an unknown quantity at this point
Feedback Score: 3 reviews
There is a reason why Toyota loves their grounds. You can never have too many grounds. Add a few and see what happens. It also sounds like a wiggle test is in order. Check all grounds and connectors. There could be a damaged wire somewhere causing high resistance. What about the battery? It is overcharging which can cause issues.

Have a great day,
jared
Jfornachon is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:41 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™