Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 02-24-2015, 09:17 PM   #1
240sx_Dylan
 
240sx_Dylan's Avatar
 
Join Date: Oct 2014
Location: NY
Posts: 18
Trader Rating: (0)
240sx_Dylan is an unknown quantity at this point
Feedback Score: 0 reviews
sr20det falls on its face. HELP!!!!!!

so i just finished installing my new z32 MAF, ISIS RS3871 turbo, enthalpy tune, and 750cc injectors on my sr. i finally got it running today and when i started it up it was idleing fine but when i give it the slightest bit of gas it falls on its face. Its getting a sh!t ton of fuel and not sure if it just cant burn it all that fast and maybe thats causing it? or if i wired in the MAF wrong maybe or something? idk im at a complete loss right now and cant figure it out
240sx_Dylan is offline   Reply With Quote
Sponsored Links
Old 02-24-2015, 09:53 PM   #2
BlackZenkiS14
Nissanaholic!
 
Join Date: Nov 2003
Location: "St. Chuck", MO
Age: 35
Posts: 2,091
Trader Rating: (15)
BlackZenkiS14 has a reputation beyond reputeBlackZenkiS14 has a reputation beyond reputeBlackZenkiS14 has a reputation beyond reputeBlackZenkiS14 has a reputation beyond reputeBlackZenkiS14 has a reputation beyond reputeBlackZenkiS14 has a reputation beyond reputeBlackZenkiS14 has a reputation beyond reputeBlackZenkiS14 has a reputation beyond reputeBlackZenkiS14 has a reputation beyond reputeBlackZenkiS14 has a reputation beyond reputeBlackZenkiS14 has a reputation beyond repute
Feedback Score: 15 reviews
Send a message via AIM to BlackZenkiS14
If you are sure you have correct ECU calibrated for the correct setup, I would say your MAF is wired wrong. Make sure both grounds are grounded through the harness, don't run one to the chassis like lots of people do.
__________________
-Kyle
BlackZenkiS14 is offline   Reply With Quote
Old 02-25-2015, 07:57 PM   #3
240sx_Dylan
 
240sx_Dylan's Avatar
 
Join Date: Oct 2014
Location: NY
Posts: 18
Trader Rating: (0)
240sx_Dylan is an unknown quantity at this point
Feedback Score: 0 reviews
yea i got it tuned through enjuku and i told them everything that i had on the car. come to find out my MAF was wired wrong so i called them and they told me the right way to wire it and its still doing the same thing. i measured the volts on the signal wire and it read like 17 volts and im pretty sure its supposed to be like 5v. that was when the car was off though and the key was in the on position. not sure if thats the right way to do it.
240sx_Dylan is offline   Reply With Quote
Old 02-26-2015, 04:48 AM   #4
Croustibat
Nissanaholic!
 
Join Date: Aug 2011
Location: France - Toulouse
Age: 41
Posts: 1,851
Trader Rating: (0)
Croustibat is an unknown quantity at this point
Feedback Score: 0 reviews
Someone told you this previously.
Quote:
Originally Posted by KoukiMonsta View Post
What you have to do.....

Is a large amount of research.
And he is right.

Besides, what is the point of asking questions when you absolutely don't do anything that does not please you ?

You bought a crappy turbo, to replace an already crappy turbo, because you did not have enough money for a turbo and supporting mods.

You bought counterfeights, have actually managed to wire them wrong, have surely damaged your ECU and wonder why it does not work.

You end up with lots of rubbish parts, AND a rubbish car that does not work.

Tough luck eh ? Now you have to spend teh money needed for quality stuff ON TOP of what you already spent on junk. Don't go saying nobody told you.

But i guess crappy coilovers and paint for the engine bay sounded better. Your choice man. Now face the consequences.
Croustibat is offline   Reply With Quote
Old 02-26-2015, 05:35 AM   #5
240sx_Dylan
 
240sx_Dylan's Avatar
 
Join Date: Oct 2014
Location: NY
Posts: 18
Trader Rating: (0)
240sx_Dylan is an unknown quantity at this point
Feedback Score: 0 reviews
iv done alot of research and after doing so its come to the MAF is bad and messing it up. Also dont worry about MY money for parts that you think are crap for MY car! and actually everything is fine so thanks! It was a bad MAF like i said so...... yea anywho thank you BlackZenkis14 for your help.
240sx_Dylan is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:17 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™