Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!* - Page 697 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Jaymo_sx · 01-04-2018, 02:04 PM

Double Post

Jaymo_sx · 01-04-2018, 02:07 PM

So the car is 99% wrapped. sorry again for the black and white photo's. I dont want to post the colour up until i get a decent quality photo of it as its really hard to get the colour to look how it does in person!

R3b · 01-05-2018, 02:45 PM

I jumped the gun and go some Blitz Z2s in 18s (TLDR what specs are you three piece guys running in the rear on stock body with decent tire)

18x7.5 +38 18x8 +38

Im thinking about relipping a set of the wheels but im curious does anyone know what OG Koguchi had on his car?

Im staying stock body, probably keep the 18x8 +38 up front and only relip the rears but im wanting a good dish but also put a pretty big tire and I cant wrap my head around whats a good offset for 9-10in that can fit a 255-275 35/40 profile. My 9.5 +12 on 225 is nice but I want to hit 400whp and at least hook a bit. Been looking back pages and fitment thread but anything close im looking are dead picture lines and s14 chassis.

This is what im going for on my hatch

***FaLKoN240*** · 01-05-2018, 03:11 PM

Quote:

Originally Posted by R3b

I jumped the gun and go some Blitz Z2s in 18s (TLDR what specs are you three piece guys running in the rear on stock body with decent tire)

18x7.5 +38 18x8 +38

Im thinking about relipping a set of the wheels but im curious does anyone know what OG Koguchi had on his car?

Im staying stock body, probably keep the 18x8 +38 up front and only relip the rears but im wanting a good dish but also put a pretty big tire and I cant wrap my head around whats a good offset for 9-10in that can fit a 255-275 35/40 profile. My 9.5 +12 on 225 is nice but I want to hit 400whp and at least hook a bit. Been looking back pages and fitment thread but anything close im looking are dead picture lines and s14 chassis.

This is what im going for on my hatch

If you want meaty tires you should be relipping the whole set.

I would do 9/9.5 or 9.5 all around

7.5 -> 9" = +38-18 =18x9+20

7.5 -> 9.5" = +38-24 =18x9.5+12

8 -> 9.5 = +38-18 =9.5+20

R3b · 01-05-2018, 03:28 PM

You were on the money, camryonbronze actually had the magazine feature with his specs and its

F/ 8.5j-18 +38 225/35

R/ 9.5j-18 +38 245/40

I think I could get away with leaving the one pair of 8's as is but then go to relip the 7.5 set to something similar to koguchi and what you have. Only issue is with a lower offset >20 I think I will rub on my stock fenders. Unless I do a crazy pull on the metal. Also wanted to get close 0 camber im at 2 right now with a 9.5 225/40

Jaymo_sx · 01-06-2018, 01:45 PM

There we go.
18x10.5 -25
18x12.5 -10

anthony_240 · 01-06-2018, 02:52 PM

Quote:

Originally Posted by Jaymo_sx

There we go.
18x10.5 -25
18x12.5 -10

Fkn beauty right there

that’s my next project, sil eighty

Sent from my iPhone using Tapatalk

deolio · 01-06-2018, 08:03 PM

Quote:

Originally Posted by anthony_240

that’s my next project, sil eighty

1. that’s not a sil80
2. sil80’s are trash

anthony_240 · 01-06-2018, 08:05 PM

Quote:

Originally Posted by deolio

1. that’s not a sil80

2. sil80’s are trash

1.Is it a coupe? Looks like a hatch in the pic.

2.That’s just one persons opinion. To each his own

Sent from my iPhone using Tapatalk

NextTimeJr · 01-07-2018, 04:07 PM

Quote:

Originally Posted by anthony_240

1.Is it a coupe? Looks like a hatch in the pic.

2.That’s just one persons opinion. To each his own

Sent from my iPhone using Tapatalk

1. 100% not a hatch

2. Sil80's are trash

Sent from my iPhone using Tapatalk

anthony_240 · 01-07-2018, 04:31 PM

Quote:

Originally Posted by NextTimeJr

1. 100% not a hatch

2. Sil80's are trash

Sent from my iPhone using Tapatalk

1. My mistake

2. You guys are a joke

Sent from my iPhone using Tapatalk

deolio · 01-07-2018, 07:24 PM

Quote:

Originally Posted by anthony_240

1. My mistake

2. sil80’s are a joke

fixed that for you. carry on with your shitty sil80 build i’m sure everyone will love your youtube vlog about it

anthony_240 · 01-07-2018, 07:27 PM

Quote:

Originally Posted by deolio

fixed that for you. carry on with your shitty sil80 build i’m sure everyone will love your youtube vlog about it

Says the guy who has “piles of shit” under his car section. Sure son, what ever you say

Sent from my iPhone using Tapatalk

***FaLKoN240*** · 01-08-2018, 10:06 AM

Sil80s are garbage.

anthony_240 · 01-08-2018, 10:42 AM

Quote:

Originally Posted by FaLKoN240

Sil80s are garbage.

Yup. You guys are the REAL s-chassis enthusiasts

Sent from my iPhone using Tapatalk

Bnr32gtr · 01-12-2018, 07:48 PM

sil80s are so lame any tru s-chassis enthusiast would feel the same imo. more pics jaymo shit is dope brother! well done, whats tire size?

Bnr32gtr · 01-12-2018, 08:06 PM

just seen u posted it on last page.car looks real good i keep starring

bmaddock · 01-12-2018, 11:00 PM

F: 18x9.5 +12
R: 18x10.5 +1 (3mm spacer + 8mm dual caliper bracket)

Rear fenders pulled as far out without buckling. Fronts are hammered out.

Looking to install my gktech roll center correction in the next few weeks which will add roughly 25mm on each side for an effective offset of 9.5 -13.

Going to look through the thread for some ideas but I'm open to recommendations of front fender size. I live close to an Origin importer so hoping they have my size in stock.

Jaymo_sx · 01-26-2018, 05:43 AM

Quote:

Originally Posted by bmaddock

F: 18x9.5 +12
R: 18x10.5 +1 (3mm spacer + 8mm dual caliper bracket)

Rear fenders pulled as far out without buckling. Fronts are hammered out.

Looking to install my gktech roll center correction in the next few weeks which will add roughly 25mm on each side for an effective offset of 9.5 -13.

Going to look through the thread for some ideas but I'm open to recommendations of front fender size. I live close to an Origin importer so hoping they have my size in stock.

That is fucking beautiful!

Edit: just shared it on my Instagram go comment so I can tag you man!

Type1Tyler1 · 01-26-2018, 12:03 PM

To be completely real I just got this pretty much stock 97 s14 and I’m a little confused on fitment. I have a 2012 wrx as well but haven’t ever messed a ton with stretch or anything or it. For the s14 it is a kouki and I have the full origin body kit bought yesterday. I have the front and rear bumper, side skirts, 30mm front fender, and 50mm overs for the rear. After doing some research I’m pretty sure I wanna do 18x9 or 18x9.5 on the front and 18x10.5 on the back. Anybody feedback would help greatly. I don’t want a ton of camber just a nice flush look. Also if anyone has some input on tire size that would be much appreciated!

deolio · 01-26-2018, 01:54 PM

Quote:

Originally Posted by Type1Tyler1

To be completely real I just got this pretty much stock 97 s14 and I’m a little confused on fitment. I have a 2012 wrx as well but haven’t ever messed a ton with stretch or anything or it. For the s14 it is a kouki and I have the full origin body kit bought yesterday. I have the front and rear bumper, side skirts, 30mm front fender, and 50mm overs for the rear. After doing some research I’m pretty sure I wanna do 18x9 or 18x9.5 on the front and 18x10.5 on the back. Anybody feedback would help greatly. I don’t want a ton of camber just a nice flush look. Also if anyone has some input on tire size that would be much appreciated!

if your quarters and front fenders aren't messed up, don't go widebody otherwise i'll have to find you and throw a brick at your car. 18x9.5 +12 with 225/35 up front, 18x9.5 +12 with 225/40 rear. keep it simple. also we have a thread specifically for questions like this http://zilvia.net/f/showthread.php?t=392494

Type1Tyler1 · 01-26-2018, 04:52 PM

Quote:

Originally Posted by deolio

if your quarters and front fenders aren't messed up, don't go widebody otherwise i'll have to find you and throw a brick at your car. 18x9.5 +12 with 225/35 up front, 18x9.5 +12 with 225/40 rear. keep it simple. also we have a thread specifically for questions like this http://zilvia.net/f/showthread.php?t=392494

Even with the back having the 50mm overs I should still do 9.5? I wanna fill the gap.

Malik · 01-31-2018, 01:32 AM

you can fit an 18 x 12 wheel with 50mm overfenders... but you should avoid chopping your metal whenever possible.

***FaLKoN240*** · 01-31-2018, 10:05 AM

Literally everyone telling him not to go widebody if he doesn't have to...

Still gonna send it.

slow.s13 · 02-02-2018, 08:22 AM

Quote:

Originally Posted by bmaddock

F: 18x9.5 +12
R: 18x10.5 +1 (3mm spacer + 8mm dual caliper bracket)

Rear fenders pulled as far out without buckling. Fronts are hammered out.

Looking to install my gktech roll center correction in the next few weeks which will add roughly 25mm on each side for an effective offset of 9.5 -13.

Going to look through the thread for some ideas but I'm open to recommendations of front fender size. I live close to an Origin importer so hoping they have my size in stock.

beautiful car bro!!

sbradley237 · 02-21-2018, 05:06 PM

Just a simple 18x9.5 +15 all around with a 225/40 f and 245/40 r

DriftingBrandon · 02-21-2018, 05:19 PM

40MM DMAX Fenders

Work VS-KF

18x9.5 -4

5" Lips 4.5" Barrel

A Disk

-9.5 Camber

215/35/18

Malik · 02-22-2018, 10:41 AM

what about the rear... show us the whole car, its looks good tho

DriftingBrandon · 02-22-2018, 10:56 AM

Quote:

Originally Posted by Malik

what about the rear... show us the whole car, its looks good tho

50MM Origin Tatakidashi Overfenders

Work VS-KF

18x10.5 -4

5.5" Lips 5" Barrels

A Disk

-3.5 Camber

235/40/18

Malik · 02-22-2018, 10:58 AM

looks excellent to be honest, i can see why you want to take the camber out...

01-04-2018, 02:04 PM	#20881
Jaymo_sx Join Date: Apr 2010 Location: Lincoln, England Age: 34 Posts: 19 Trader Rating: (0) Feedback Score: 0 reviews	Double Post __________________ Instagram: @dodgemsquad Facebook: www.facebook.com/dodgemsquad Last edited by Jaymo_sx; 01-04-2018 at 02:06 PM.. Reason: double post

01-04-2018, 02:07 PM	#20882
Jaymo_sx Join Date: Apr 2010 Location: Lincoln, England Age: 34 Posts: 19 Trader Rating: (0) Feedback Score: 0 reviews	So the car is 99% wrapped. sorry again for the black and white photo's. I dont want to post the colour up until i get a decent quality photo of it as its really hard to get the colour to look how it does in person! __________________ Instagram: @dodgemsquad Facebook: www.facebook.com/dodgemsquad

01-06-2018, 01:45 PM	#20886
Jaymo_sx Join Date: Apr 2010 Location: Lincoln, England Age: 34 Posts: 19 Trader Rating: (0) Feedback Score: 0 reviews	There we go. 18x10.5 -25 18x12.5 -10 __________________ Instagram: @dodgemsquad Facebook: www.facebook.com/dodgemsquad

01-08-2018, 10:06 AM	#20894
*FaLKoN240* Super Moderator Join Date: Jun 2004 Location: SF Bay Area Posts: 16,761 Trader Rating: (73) Feedback Score: 73 reviews	Sil80s are garbage. __________________ Best way to do business with me? Make your best offer FIRST.

01-12-2018, 11:00 PM	#20898
bmaddock Zilvia Junkie Join Date: Sep 2011 Location: Richmond Posts: 506 Trader Rating: (1) Feedback Score: 1 reviews	F: 18x9.5 +12 R: 18x10.5 +1 (3mm spacer + 8mm dual caliper bracket) Rear fenders pulled as far out without buckling. Fronts are hammered out. Looking to install my gktech roll center correction in the next few weeks which will add roughly 25mm on each side for an effective offset of 9.5 -13. Going to look through the thread for some ideas but I'm open to recommendations of front fender size. I live close to an Origin importer so hoping they have my size in stock. __________________

01-05-2018, 02:45 PM	#20883
R3b Zilvia Junkie Join Date: Mar 2015 Location: South FL Age: 24 Posts: 581 Trader Rating: (0) Feedback Score: 0 reviews	I jumped the gun and go some Blitz Z2s in 18s (TLDR what specs are you three piece guys running in the rear on stock body with decent tire) 18x7.5 +38 18x8 +38 Im thinking about relipping a set of the wheels but im curious does anyone know what OG Koguchi had on his car? Im staying stock body, probably keep the 18x8 +38 up front and only relip the rears but im wanting a good dish but also put a pretty big tire and I cant wrap my head around whats a good offset for 9-10in that can fit a 255-275 35/40 profile. My 9.5 +12 on 225 is nice but I want to hit 400whp and at least hook a bit. Been looking back pages and fitment thread but anything close im looking are dead picture lines and s14 chassis. This is what im going for on my hatch

01-05-2018, 03:28 PM	#20885
R3b Zilvia Junkie Join Date: Mar 2015 Location: South FL Age: 24 Posts: 581 Trader Rating: (0) Feedback Score: 0 reviews	You were on the money, camryonbronze actually had the magazine feature with his specs and its F/ 8.5j-18 +38 225/35 R/ 9.5j-18 +38 245/40 I think I could get away with leaving the one pair of 8's as is but then go to relip the 7.5 set to something similar to koguchi and what you have. Only issue is with a lower offset >20 I think I will rub on my stock fenders. Unless I do a crazy pull on the metal. Also wanted to get close 0 camber im at 2 right now with a 9.5 225/40

01-12-2018, 07:48 PM	#20896
Bnr32gtr Zilvia Addict Join Date: Feb 2013 Location: Mason-Dixon Age: 34 Posts: 600 Trader Rating: (8) Feedback Score: 8 reviews	sil80s are so lame any tru s-chassis enthusiast would feel the same imo. more pics jaymo shit is dope brother! well done, whats tire size?

01-12-2018, 08:06 PM	#20897
Bnr32gtr Zilvia Addict Join Date: Feb 2013 Location: Mason-Dixon Age: 34 Posts: 600 Trader Rating: (8) Feedback Score: 8 reviews	just seen u posted it on last page.car looks real good i keep starring

01-26-2018, 12:03 PM	#20900
Type1Tyler1 Join Date: Jan 2018 Location: Tennessee Age: 24 Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	Help with s14 fitment To be completely real I just got this pretty much stock 97 s14 and I’m a little confused on fitment. I have a 2012 wrx as well but haven’t ever messed a ton with stretch or anything or it. For the s14 it is a kouki and I have the full origin body kit bought yesterday. I have the front and rear bumper, side skirts, 30mm front fender, and 50mm overs for the rear. After doing some research I’m pretty sure I wanna do 18x9 or 18x9.5 on the front and 18x10.5 on the back. Anybody feedback would help greatly. I don’t want a ton of camber just a nice flush look. Also if anyone has some input on tire size that would be much appreciated!

01-31-2018, 01:32 AM	#20903
Malik Nissanaholic! Join Date: Jun 2013 Location: Queens, NY Posts: 1,796 Trader Rating: (0) Feedback Score: 0 reviews	you can fit an 18 x 12 wheel with 50mm overfenders... but you should avoid chopping your metal whenever possible.

01-31-2018, 10:05 AM	#20904
*FaLKoN240* Super Moderator Join Date: Jun 2004 Location: SF Bay Area Posts: 16,761 Trader Rating: (73) Feedback Score: 73 reviews	Literally everyone telling him not to go widebody if he doesn't have to... Still gonna send it. __________________ Best way to do business with me? Make your best offer FIRST.

02-21-2018, 05:06 PM	#20906
sbradley237 Join Date: Jul 2012 Location: Alexandria VA Age: 31 Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	Just a simple 18x9.5 +15 all around with a 225/40 f and 245/40 r

02-21-2018, 05:19 PM	#20907
DriftingBrandon Zilvia FREAK! Join Date: Jan 2015 Location: Central Florida Age: 22 Posts: 1,405 Trader Rating: (1) Feedback Score: 1 reviews	40MM DMAX Fenders Work VS-KF 18x9.5 -4 5" Lips 4.5" Barrel A Disk -9.5 Camber 215/35/18 __________________ Last edited by DriftingBrandon; 05-06-2018 at 01:44 AM..

02-22-2018, 10:41 AM	#20908
Malik Nissanaholic! Join Date: Jun 2013 Location: Queens, NY Posts: 1,796 Trader Rating: (0) Feedback Score: 0 reviews	what about the rear... show us the whole car, its looks good tho

02-22-2018, 10:58 AM	#20910
Malik Nissanaholic! Join Date: Jun 2013 Location: Queens, NY Posts: 1,796 Trader Rating: (0) Feedback Score: 0 reviews	looks excellent to be honest, i can see why you want to take the camber out...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode