Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 07-07-2020, 07:25 AM   #1
Nick_pow
 
Join Date: Mar 2016
Location: Trinidad and tobago
Posts: 6
Trader Rating: (0)
Nick_pow is an unknown quantity at this point
Feedback Score: 0 reviews
Unhappy Auto s14a brake upgrade issue...need help

Hi everyone.

Vehicle: 1998 s14 with Sr20det automatic with abs

The initially the had a brake problem where the brake peddle had to be pupped to build brake pressure to stop the car. It was not air in the system but a faulty bmc, the car had stock calipers and rotors at the time.

I decided to do a brake upgrade as follows:
1.Replace stock calipers with R33 gtst front and rear calipers and rotors all calipers seals replaced with new seals.
2.New brake pads with same stock r33 gtst rotors resurfaced.
3.Replaced stock bmc with an abs hfm dot parts bm57 1 1/16.
4.Braided brake lines.
5.The car still has it?s original brake booster and abs system.

When I did the upgrade the spongy and pumping of the brake peddle issue was solved.
But now I have a new problem that I can?t seem to figure out. The peddle travel is long but not completely to the floor. When I press the peddle for braking the car only slows to a stop regardless if I?m driving slow 50km/hr or at 100km/hr and I slam on the brake peddle the just slows to a stop. It?s not getting that instant stopping power or to ?lock up? the wheels for the abs to engage.

Things that I have done so far to trouble shoot this issue:
1.I swapped the brake booster with an s15 brake booster this did not work.
2.The vacuum hose and connection is good no issues there.
3.I bleed all calipers furthest one first and so on no air I?m the system still didn?t help.
4. I went as far as to swap out the abs module that did not work.

The only things left to try is to change the rotors and check the computer control unit for the abs system.

Any suggestions to solve this problem. The car is dangerous to drive with this braking problem.

Thank you
Nick_pow is offline   Reply With Quote
Sponsored Links
Old 07-07-2020, 09:42 AM   #2
S14rebuild
BANNED
 
Join Date: May 2019
Location: Florida-FAIL
Posts: 2,497
Trader Rating: (8)
S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild
Feedback Score: 8 reviews
U have the caliper on the properside of the car? (Bleeder screw poi ted up)?
S14rebuild is offline   Reply With Quote
Old 07-09-2020, 02:16 AM   #3
samotage
BANNED
 
Join Date: Oct 2018
Location: Melbourne
Posts: 88
Trader Rating: (0)
samotage is an unknown quantity at this point
Feedback Score: 0 reviews
An R33 caliber setup will need a suitable master cylinder to pump more fluid.


Sent from my iPad using Tapatalk
samotage is offline   Reply With Quote
Old 07-09-2020, 02:17 AM   #4
samotage
BANNED
 
Join Date: Oct 2018
Location: Melbourne
Posts: 88
Trader Rating: (0)
samotage is an unknown quantity at this point
Feedback Score: 0 reviews
Read caliper


Sent from my iPad using Tapatalk
samotage is offline   Reply With Quote
Old 07-09-2020, 10:56 AM   #5
FaLKoN240
Super Moderator
 
FaLKoN240's Avatar
 
Join Date: Jun 2004
Location: SF Bay Area
Posts: 16,760
Trader Rating: (73)
FaLKoN240 is close to perfectionFaLKoN240 is close to perfectionFaLKoN240 is close to perfectionFaLKoN240 is close to perfectionFaLKoN240 is close to perfectionFaLKoN240 is close to perfectionFaLKoN240 is close to perfectionFaLKoN240 is close to perfectionFaLKoN240 is close to perfectionFaLKoN240 is close to perfectionFaLKoN240 is close to perfection
Feedback Score: 73 reviews
I'm going to bet the ABS system is not bled properly.

Also check to make sure the brake bleeder screws are on the top.

Also brake bleed order is driver rear, pass rear, pass front, driver front
__________________

Best way to do business with me? Make your best offer FIRST.
FaLKoN240 is offline   Reply With Quote
Old 07-13-2020, 10:22 AM   #6
LoSt180
Zilvia Addict
 
LoSt180's Avatar
 
Join Date: May 2013
Location: MD
Posts: 966
Trader Rating: (18)
LoSt180 is an unknown quantity at this point
Feedback Score: 18 reviews
Sounds like brake calipers are upside down and not bleeding properly. Or someone screwed up the rebuild and some of the pistons are stuck.
LoSt180 is offline   Reply With Quote
Reply

Bookmarks

Tags
brake upgrade, r33 brakes, s14, s14 brakes, s14 calipers


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:25 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™