gt2871r coolent line fitment problem - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ka24det92 · 11-29-2010, 12:57 PM

I have a 2871r and I'm trying to install these upgraded turbo line but the cooling line on the wastgate side I hitting the wastgate rod I have tryed it a few way and it seem to really only go together one way is it possible I have the wrong lines ?

nismoman · 11-29-2010, 02:22 PM

I had the same problem I'll go look at mine to see how I made it fit

TrustS13 · 11-29-2010, 02:24 PM

You are supposed to be using the wastegate with the U bend in it. You can turn the wastegate rod with your hand for clearance. Also, the coolant line (if aftermarket) you use the side with the 90* bend in it.

nismoman · 11-29-2010, 02:34 PM

Ok It looks like I hooked the straight end to the turbo coming straight out over the actuator arm towards the strut tower. Then I looped down under towards the engine block If that makes any sense. I have DIF lines.

nismoman · 11-29-2010, 06:58 PM

My wastegate had the bend in it that's why my line fit over the top. I didn't try to turn it though. Worked fine for me the end with the 90 is on the block

11-29-2010, 12:57 PM	#1
ka24det92 Zilvia Junkie Join Date: Feb 2009 Location: houston Posts: 324 Trader Rating: (0) Feedback Score: 0 reviews	gt2871r coolent line fitment problem I have a 2871r and I'm trying to install these upgraded turbo line but the cooling line on the wastgate side I hitting the wastgate rod I have tryed it a few way and it seem to really only go together one way is it possible I have the wrong lines ?

11-29-2010, 02:22 PM	#2
nismoman Zilvia Junkie Join Date: Jul 2005 Location: Bowie, MD Posts: 412 Trader Rating: (0) Feedback Score: 0 reviews	I had the same problem I'll go look at mine to see how I made it fit __________________

11-29-2010, 02:34 PM	#4
nismoman Zilvia Junkie Join Date: Jul 2005 Location: Bowie, MD Posts: 412 Trader Rating: (0) Feedback Score: 0 reviews	Ok It looks like I hooked the straight end to the turbo coming straight out over the actuator arm towards the strut tower. Then I looped down under towards the engine block If that makes any sense. I have DIF lines. __________________

11-29-2010, 06:58 PM	#5
nismoman Zilvia Junkie Join Date: Jul 2005 Location: Bowie, MD Posts: 412 Trader Rating: (0) Feedback Score: 0 reviews	My wastegate had the bend in it that's why my line fit over the top. I didn't try to turn it though. Worked fine for me the end with the 90 is on the block __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-29-2010, 02:24 PM	#3
TrustS13 Zilvia Addict Join Date: Nov 2008 Location: Greensboro, NC Age: 33 Posts: 631 Trader Rating: (16) Feedback Score: 16 reviews	You are supposed to be using the wastegate with the U bend in it. You can turn the wastegate rod with your hand for clearance. Also, the coolant line (if aftermarket) you use the side with the 90* bend in it.