"help Car Burly Moving" - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

turbosx · 07-02-2008, 08:34 PM

i need help, I'm having problems with my car its a s13 with a sr20det i had it for 2yrs with the SR and today when i was taking off the car starts reving but the car is burly moving i don't know if its the turbo or the clutch, when it picks up speed it pulls but my boost goes to 8psi and then it starts going down on full throttle and also when the car is @ 3000 rpm and i punch it the car stars vibrating and i here like a squealing noise so i think it the turbo but not sure some help would be appreciated

THANK YOU IN ADVANCED

renegade_ewok · 07-02-2008, 08:38 PM

clutch

If you mash the gas, the RPMs go up and your not going anywhere...

Clutch

KA-T_240 · 07-02-2008, 08:52 PM

if you are driving and you put your foot to the floor and you just rev like its in nuetral. Look at your clutch.

If you can still drive fine, but you are not boosting. Check the turbo. Look in your IC pipes for oil

BustedS13 · 07-02-2008, 08:57 PM

"barely" moving.

turbosx · 07-02-2008, 09:03 PM

it moves but it takes off at a slow pace, but can the squealing noice be it only does it when it punch it over 5000rpm

dookiedang · 07-02-2008, 09:06 PM

could be lose maf sensor/fucked up maf sensor. just a suggestion...

turbosx · 07-02-2008, 09:06 PM

Quote:

Originally Posted by KA-T_240

if you are driving and you put your foot to the floor and you just rev like its in nuetral. Look at your clutch.

If you can still drive fine, but you are not boosting. Check the turbo. Look in your IC pipes for oil

well i have a blitz BOV and at the end it has oil stains around the lip

KA-T_240 · 07-02-2008, 10:39 PM

just take the 5min and take a IC pipe off your turbo. Check for shaft play also.

The noise could come from your turbo.

07-02-2008, 08:34 PM	#1
turbosx Zilvia Member Join Date: Feb 2007 Location: SO CAL Posts: 213 Trader Rating: (1) Feedback Score: 1 reviews	"help Car Burly Moving" i need help, I'm having problems with my car its a s13 with a sr20det i had it for 2yrs with the SR and today when i was taking off the car starts reving but the car is burly moving i don't know if its the turbo or the clutch, when it picks up speed it pulls but my boost goes to 8psi and then it starts going down on full throttle and also when the car is @ 3000 rpm and i punch it the car stars vibrating and i here like a squealing noise so i think it the turbo but not sure some help would be appreciated THANK YOU IN ADVANCED __________________

07-02-2008, 08:52 PM	#3
KA-T_240 Nissanaholic! Join Date: Sep 2005 Location: Moorhead, MN Age: 34 Posts: 1,788 Trader Rating: (0) Feedback Score: 0 reviews	if you are driving and you put your foot to the floor and you just rev like its in nuetral. Look at your clutch. If you can still drive fine, but you are not boosting. Check the turbo. Look in your IC pipes for oil __________________

07-02-2008, 08:57 PM	#4
BustedS13 Post Whore! Join Date: Jan 2004 Location: Phoenix AZ Age: 36 Posts: 10,287 Trader Rating: (0) Feedback Score: 0 reviews	"barely" moving. __________________

07-02-2008, 09:03 PM	#5
turbosx Zilvia Member Join Date: Feb 2007 Location: SO CAL Posts: 213 Trader Rating: (1) Feedback Score: 1 reviews	it moves but it takes off at a slow pace, but can the squealing noice be it only does it when it punch it over 5000rpm __________________

07-02-2008, 10:39 PM	#8
KA-T_240 Nissanaholic! Join Date: Sep 2005 Location: Moorhead, MN Age: 34 Posts: 1,788 Trader Rating: (0) Feedback Score: 0 reviews	just take the 5min and take a IC pipe off your turbo. Check for shaft play also. The noise could come from your turbo. __________________

07-02-2008, 08:38 PM	#2
renegade_ewok Zilvia Junkie Join Date: Oct 2007 Location: NYC Age: 33 Posts: 450 Trader Rating: (0) Feedback Score: 0 reviews	clutch If you mash the gas, the RPMs go up and your not going anywhere... Clutch

07-02-2008, 09:06 PM	#6
dookiedang Zilvia FREAK! Join Date: Apr 2008 Location: Vegas to Northern Illinois Posts: 1,056 Trader Rating: (13) Feedback Score: 13 reviews	could be lose maf sensor/fucked up maf sensor. just a suggestion...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode