S15 Speed sensor - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Tenchuu · 11-20-2004, 01:34 PM

Does anyone know where to buy an S15 Speed sensor (for the Diff) I'm Getting nowhere with thie everywhere else I've looked includeing friends in okinawa (got me an engine, transmission, driveshaft, intercooler but couldn't find the LSD with speed sensor).

RiceEata · 11-20-2004, 08:56 PM

You don't need the s15 diff, you can use the ka speed sensor and (plastic)worm gear. The worm gear needs to be shortened and bored.... the 6spd has a plate blocking off a hole were the ka speed sensor goes.

worm gear dimensions =
.550" lenght
bored to 1.11"

you also need:
2 c-clips thickness .095" and ID (inside diameter) 1.030"
1 ball bearing .190"

double check the measurements when you take apart the transmisson...

11-20-2004, 01:34 PM	#1
Tenchuu Post Whore! Join Date: Apr 2004 Location: Oregon Age: 39 Posts: 2,474 Trader Rating: (8) Rides Gallery: Tenchuu Feedback Score: 8 reviews	S15 Speed sensor Does anyone know where to buy an S15 Speed sensor (for the Diff) I'm Getting nowhere with thie everywhere else I've looked includeing friends in okinawa (got me an engine, transmission, driveshaft, intercooler but couldn't find the LSD with speed sensor).

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-20-2004, 08:56 PM	#2
RiceEata Zilvia Member Join Date: Jan 2003 Location: 808 Age: 41 Posts: 226 Trader Rating: (0) Feedback Score: 0 reviews	You don't need the s15 diff, you can use the ka speed sensor and (plastic)worm gear. The worm gear needs to be shortened and bored.... the 6spd has a plate blocking off a hole were the ka speed sensor goes. worm gear dimensions = .550" lenght bored to 1.11" you also need: 2 c-clips thickness .095" and ID (inside diameter) 1.030" 1 ball bearing .190" double check the measurements when you take apart the transmisson...