1991 Hatch, kaaz, SR, hks So cal special - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

keepitmovin · 08-20-2007, 10:15 PM

Heres the deal:

-The Bad
Car was in a small fender bender about 4 months ago. Hood and bumper are slightly bent along with intercooler. Intercooler holds pressure; perfect! FRAME IS STRAIGHTER then hue hefner. I was going like 8mph on impact. I have replacements hood and bumper included in sale. I was gonna fix it but its now turning out this way…

-Paint is whatever

-Car has an exhaust leak, probably the down pipe. I have not been driving it and have been too busy to fix it.

-One tire on the advan wheels is flat. Car is currently riding on (2) OZ wheels in the front and advans are in the rear.

I am selling it because I have become WAY too busy for it. School and work is killing me and I’m broke. Life sucks.

When I swapped in the SR, I tried to replace all the necessities. Car was not pushed, never had time to push it :/

Anyways the good:

1992 Nissan 240sx has 227,000
SR20DET Engine swapped performed by me and friends. Has around 65k
Clip brought at G-dimensions. Compression tested 155 all across.

When Swapped I changed these parts:
-Manifold /spark plug/valve cover/ turbo inlet/ turbo outlet/ Gaskets
-Water pump OEM
-Thermostat OEM
-Alternator was rebuilt

-Changed out starter about 3 months ago.

Engine
-Walbro Fuel Pump
-HKS blow off valve
- Koyo Radiator
-Greddy Front Mount intercooler
-Greddy Catch Can
-Power Enterprise Belts
-Samco Siliclone radiator hoses
-Iridium spark Plugs heat range 7

Suspension/Wheels
-Phase 2 motor trend subframe spacers
-Nismo power brace
-Kaazama Tension rods
-Tien Tie Rods
-Cusco RUCA
-HKS Hipermax II Coilovers
-Attain 5 lug
-Advan sa3r 17x8 235/40/17 +35 17X9 255/40/17 +38 (Rear looks nice with the 255 but fronts can use a spacer for you Nazi’s)

Tranny
-Aluminum Drive Shaft
-Kaaz 2 way Differential
- Excedy stage 1 clutch

Exhaust
-RSR Ex-mag exhaust
-XS engineering downpipe

Interior-Misc.
-Greddy Boost/Oil pressure/ Water Temp gauges
-Real Bride Brix Seat
-Fake Bride Brix Seat
-Razo Pedals
-Nardi Rally sport steering wheel iicr 350mm
-Works bell hub
- NRG quick release ver. 2

Mobil 1 oil and filter always used for oil changes. I can have this car smogged at your expense. I would like to sell the car as a whole. Take it all. Might part out the wheels and a couple other parts then sell not too sure though. If you need a SR’d car, are in the price range, shoot me an email with your number. Well talk and see what we can do (WITHIN REASON). Only SERIOUS buyers. Let’s not waste both our time. Thanks for looking. I don’t think im missing anything..$6,900

BEST WAY TO REACH ME
If interested send an email to: keepitmovin7 AT yahoo.com

http://img255.imageshack.us/img255/8181/interiorkt5.jpg
http://img260.imageshack.us/img260/6223/engineyb2.jpg
http://img299.imageshack.us/img299/1613/brideoz9.jpg
http://i18.tinypic.com/5y1ouid.jpg
http://i9.tinypic.com/54knyc0.jpg
http://img519.imageshack.us/img519/6882/side2kj9.jpg
http://i16.tinypic.com/53agqwx.jpg
http://img253.imageshack.us/img253/4...2006001lb1.jpg
http://i12.tinypic.com/6bc1n2w.jpg
http://img519.imageshack.us/img519/3060/dsc00082re0.jpg

pl'ss13 · 08-20-2007, 11:14 PM

part out the Advan Rims?

keepitmovin · 09-03-2007, 10:35 AM

Im willing to part out the rims. PM me.
Car is still for sale. New price 6500! This thing has to go.

d0ugch0i · 09-03-2007, 10:39 AM

you have all 4 sets of the advan rims?? PM me price.

***CrimsonRockett*** · 09-03-2007, 11:12 AM

Sent you a PM.

Interested in a few other things as well.

sicarius82 · 09-03-2007, 11:16 AM

pm price for bride seats and nardi steering wheel... thanks.

keepitmovin · 09-03-2007, 08:14 PM

************************************************** *******

Only thing that Im going to part out as of right now is the advan rims. If this thing does doesnt sell in a couple weeks then Im going to part out what I can. If you are really interested in some parts shoot me an email with your name and number So-cal only. When and if I do part out the car I will call down the list and try to get these things sold.

Other items I have lying around the garage that I will sell right now is:

All for s13 / redtop

vlsd 6 bolt
xs engineering downpipe
samco top hose
Sr20det starter
Sr20det ac compressor
Sr20det stock Radiator
S13 Rsr exmag (pending sale?)
Greddy gauges (water temp, exhuast, boost,)
Megan testpipe Free megan downpipe with purchase! (Downpipe has hole in it

2 5 mm spaces (4 or 5 lug)
Redtop Spark plug cover

These parts are ready to sell ASAP!
Car parts on car (except for the advan rims) will stay on the car (for now...)

keepitmovin AT yahoo.com

************************************************** *******

***CrimsonRockett*** · 09-03-2007, 08:59 PM

RSR Exmag is mineeeeeee.

By any chance do you have any clearer pictures of it?

Like, a rear one and a sideshot that shows the exhaust.

I'll pick up those 5mm spacers too.

Thankksss.

cfinch · 09-03-2007, 09:54 PM

Looks familiar... Nice car gl with the sale!

keepitmovin · 09-08-2007, 01:02 PM

Quote:

Originally Posted by cfinch

Looks familiar... Nice car gl with the sale!

Thanks for all the help with he car Chris. Still runs strong (shameless plug)

s13gold · 09-09-2007, 06:19 PM

8mpg on impact....hahahahaha LOL.

keepitmovin · 09-10-2007, 01:02 AM

Quote:

Originally Posted by s13gold

8mpg on impact....hahahahaha LOL.

It does have poor gas mileage. Error fixed haha.

keepitmovin · 09-18-2007, 08:22 PM

Still for sale guys. Help me get through college :/

89fastback · 09-21-2007, 02:20 PM

advans????? ready to leave you yet?

08-20-2007, 10:15 PM	#1
keepitmovin Zilvia Member Join Date: Oct 2001 Location: so cal Posts: 299 Trader Rating: (2) Feedback Score: 2 reviews	1991 Hatch, kaaz, SR, hks So cal special Heres the deal: -The Bad Car was in a small fender bender about 4 months ago. Hood and bumper are slightly bent along with intercooler. Intercooler holds pressure; perfect! FRAME IS STRAIGHTER then hue hefner. I was going like 8mph on impact. I have replacements hood and bumper included in sale. I was gonna fix it but its now turning out this way… -Paint is whatever -Car has an exhaust leak, probably the down pipe. I have not been driving it and have been too busy to fix it. -One tire on the advan wheels is flat. Car is currently riding on (2) OZ wheels in the front and advans are in the rear. I am selling it because I have become WAY too busy for it. School and work is killing me and I’m broke. Life sucks. When I swapped in the SR, I tried to replace all the necessities. Car was not pushed, never had time to push it :/ Anyways the good: 1992 Nissan 240sx has 227,000 SR20DET Engine swapped performed by me and friends. Has around 65k Clip brought at G-dimensions. Compression tested 155 all across. When Swapped I changed these parts: -Manifold /spark plug/valve cover/ turbo inlet/ turbo outlet/ Gaskets -Water pump OEM -Thermostat OEM -Alternator was rebuilt -Changed out starter about 3 months ago. Engine -Walbro Fuel Pump -HKS blow off valve - Koyo Radiator -Greddy Front Mount intercooler -Greddy Catch Can -Power Enterprise Belts -Samco Siliclone radiator hoses -Iridium spark Plugs heat range 7 Suspension/Wheels -Phase 2 motor trend subframe spacers -Nismo power brace -Kaazama Tension rods -Tien Tie Rods -Cusco RUCA -HKS Hipermax II Coilovers -Attain 5 lug -Advan sa3r 17x8 235/40/17 +35 17X9 255/40/17 +38 (Rear looks nice with the 255 but fronts can use a spacer for you Nazi’s) Tranny -Aluminum Drive Shaft -Kaaz 2 way Differential - Excedy stage 1 clutch Exhaust -RSR Ex-mag exhaust -XS engineering downpipe Interior-Misc. -Greddy Boost/Oil pressure/ Water Temp gauges -Real Bride Brix Seat -Fake Bride Brix Seat -Razo Pedals -Nardi Rally sport steering wheel iicr 350mm -Works bell hub - NRG quick release ver. 2 Mobil 1 oil and filter always used for oil changes. I can have this car smogged at your expense. I would like to sell the car as a whole. Take it all. Might part out the wheels and a couple other parts then sell not too sure though. If you need a SR’d car, are in the price range, shoot me an email with your number. Well talk and see what we can do (WITHIN REASON). Only SERIOUS buyers. Let’s not waste both our time. Thanks for looking. I don’t think im missing anything..$6,900 BEST WAY TO REACH ME If interested send an email to: keepitmovin7 AT yahoo.com http://img255.imageshack.us/img255/8181/interiorkt5.jpg http://img260.imageshack.us/img260/6223/engineyb2.jpg http://img299.imageshack.us/img299/1613/brideoz9.jpg http://i18.tinypic.com/5y1ouid.jpg http://i9.tinypic.com/54knyc0.jpg http://img519.imageshack.us/img519/6882/side2kj9.jpg http://i16.tinypic.com/53agqwx.jpg http://img253.imageshack.us/img253/4...2006001lb1.jpg http://i12.tinypic.com/6bc1n2w.jpg http://img519.imageshack.us/img519/3060/dsc00082re0.jpg Last edited by keepitmovin; 09-10-2007 at 01:03 AM..

09-03-2007, 11:16 AM	#6
sicarius82 Zilvia Member Join Date: Oct 2006 Location: Irvine, CA Age: 38 Posts: 183 Trader Rating: (0) Feedback Score: 0 reviews	pm price for bride seats and nardi steering wheel... thanks. __________________ Man I love this place...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-20-2007, 11:14 PM	#2
pl'ss13 Banned from the Marketplace Join Date: Apr 2007 Location: SoCal Age: 34 Posts: 169 Trader Rating: (0) Feedback Score: 0 reviews	part out the Advan Rims?

09-03-2007, 10:35 AM	#3
keepitmovin Zilvia Member Join Date: Oct 2001 Location: so cal Posts: 299 Trader Rating: (2) Feedback Score: 2 reviews	Im willing to part out the rims. PM me. Car is still for sale. New price 6500! This thing has to go.

09-03-2007, 10:39 AM	#4
d0ugch0i Leaky Injector Join Date: Apr 2007 Location: irvine Posts: 112 Trader Rating: (0) Feedback Score: 0 reviews	you have all 4 sets of the advan rims?? PM me price.

09-03-2007, 08:14 PM	#7
keepitmovin Zilvia Member Join Date: Oct 2001 Location: so cal Posts: 299 Trader Rating: (2) Feedback Score: 2 reviews	************************************************ *** Only thing that Im going to part out as of right now is the advan rims. If this thing does doesnt sell in a couple weeks then Im going to part out what I can. If you are really interested in some parts shoot me an email with your name and number So-cal only. When and if I do part out the car I will call down the list and try to get these things sold. Other items I have lying around the garage that I will sell right now is: All for s13 / redtop vlsd 6 bolt xs engineering downpipe samco top hose Sr20det starter Sr20det ac compressor Sr20det stock Radiator S13 Rsr exmag (pending sale?) Greddy gauges (water temp, exhuast, boost,) Megan testpipe Free megan downpipe with purchase! (Downpipe has hole in it 2 5 mm spaces (4 or 5 lug) Redtop Spark plug cover These parts are ready to sell ASAP! Car parts on car (except for the advan rims) will stay on the car (for now...) keepitmovin AT yahoo.com ********************************************** *****

09-03-2007, 09:54 PM	#9
cfinch Zilvia Addict Join Date: Dec 2004 Location: Las Vegas Age: 37 Posts: 726 Trader Rating: (2) Feedback Score: 2 reviews	Looks familiar... Nice car gl with the sale!

09-09-2007, 06:19 PM	#11
s13gold Post Whore! Join Date: Jan 2007 Location: CARSON Posts: 4,240 Trader Rating: (79) Feedback Score: 79 reviews	8mpg on impact....hahahahaha LOL.

09-18-2007, 08:22 PM	#13
keepitmovin Zilvia Member Join Date: Oct 2001 Location: so cal Posts: 299 Trader Rating: (2) Feedback Score: 2 reviews	Still for sale guys. Help me get through college :/

09-21-2007, 02:20 PM	#14
89fastback Zilvia Junkie Join Date: May 2007 Location: Arizona Posts: 315 Trader Rating: (0) Feedback Score: 0 reviews	advans????? ready to leave you yet?