MyblackS13

Looks like Strange Engineering struts on the drag car, spindle integrated into the bottom of the strut.

__________________
Dustin - S13 Build
LS1 Inside

NiSilS14

it's using typical promod/A-arm for front suspension. Not much left of that car that's actually 240sx. He's got a build thread on ka-t.org

Black R

I have a similar setup and 7.5deg of caster: I rub front bumper / fender in that same area.
285's tho...

Rocket bunny front flares, so another 50mm wider than my previously rolled fenders.

__________________
S13 XE coupe: Aristo GTE, R154, GT37, Defsport Wilwood kit, KTS coilovers

MamangSorbetero

These are the coolest extended FLCA I've ever seen. They are also priced amazingly:



https://technotoytuning.com/nissan/s...arms-s13-240sx

TheRealSy90

Look cool, and heavy. Also no inner heim joint so caster adjustment is limited. Weird that they're wider than stock.


Sent from my iPhone using Tapatalk

__________________

ka-titties

yeah, the lack of inner heim makes me flaccid.

the increased width would limit drift applications, but could be nice for road racing.

LuckyX2

Anybody see the new grip oriented knuckles from GKTech? Probably going to be selling my GKTech drift knuckles for those.

__________________
My S13 SR Street Mod Build

Pimpnyou204

I'm about to purchase their front set and they only sell the V3 on their site? Am I missing something? PBM came out with a new set is that what you mean?

derass

In-cabin adjustable rear sway bar on Chris Forsberg's Z. I'm guessing there's a cam profile inside that tube.

derass

Acostal Motorsport Development kit. First I've ever seen of it.

ka-titties

They posted it on their Instagram. They're not for sale yet.

PoorMans180SX

IIRC, an adjustable swaybar like that works because as you rotate that flat endlink, it's resistance to bending changes. No need for a cam profile.

Yeah it's been out for a while. The cost is a little exhorbitant IMHO, but it's interesting to see a caster-biased kit. Stewy loves caster haha.

One of these days I'll update the OP, I swear, hahah.

__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.

slider2828

Quick question guys. I am putt on my front driftworks knuckly. The top of the spindle is hitting the bottom bracket of the coilover ever so slightly.

I have two options,

1. flip the coilover bracket

2. grind a little of the knuckle <1.5mm on the edge. (I went with this one, but the coilover bolts on a little tight to the knuckle...

What you guys think?

Thanks!

__________________
Turn and Burn!

Razi

I'm definitely getting a set.
It'd be cool if they made the steering arm a touch shorter to speed up the steering a tiny bit.

TheRealSy90

So get the drift knuckles lol.


Sent from my iPhone using Tapatalk

__________________

ka-titties

The ackerman setup on the drift knuckles doesn't work well for road racing.

LuckyX2

I currently have the GKTech drift knuckles but I autocross, not drift. They're better than stock knuckles for me but the grip knuckles would be even better in my case. If you want the extra lock and adjusted ackerman, go drift knuckles, if you just want the fixed geometry, go grip knuckles.

Slider, I'd say you're fine having ground off a bit of the knuckle, those things are pretty beefy and 1-2mm isn't gonna change much.

__________________
My S13 SR Street Mod Build

Razi

Umm.
No.

I don't want fast as hell steering while going 100+mph.

PoorMans180SX

Where are you getting this?

You've never driven a car with shorter tie rod pickups have you? You still have 2.25 turns lock to lock, it's nothing crazy.

__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.

Turb

Been looking into getting an angle kit for my s13, and came across the "Unicorn Angle Kit"
LINK:http://www.driftknuckles.com/product...corn-angle-kit

Seems to be a pretty basic setup just seems the rank would over center like a mofo, can't seem to find any reviews or anything online of it, any feedback?

gaz_moose

^^if they have cut and shut the knuckles like we do over here then you would want to move the rack forward an inch and not a few MM like those offset bushes do^^.

Pimpnyou204

I've searched Silvia and google and can't quite get an answer. I've messaged gktech and pbm and they both vary from answers.

The pbm top camber plate (16mm) and spacer (7mm) according to pbm are able to be used and would avoid cutting of the strut top.

According to messsges from gktech they say you will need their top plate (20mm) and if it's an s13 a 8mm spacer in order to not cut the strut top.

Short story pbm says 23 mm clears gktech says 28mm has anyone actually purchased either of these sets would like to elaborate on which is the correct one or what makes them vary in size other than I assume the allowable clearance of the dampener screw top.

TheRealSy90

They're probably both correct due to design differences between each brand's plate. PBM's requires the 23mm to clear and GkTech requires 28 like they said. Doesn't mean either is incorrect it means they're designed differently.


Sent from my iPhone using Tapatalk

__________________

xpinoyxmk

Who does rack relocations in the states?! Price helps too!

derass

Agreed. I had MA Motorsports knuckles and a HICAS steering rack. There was a ton of angle (too much actually); but honestly, the steering response didn't feel any different than stock. Not twitchy or anything.

Also, I know these are terribly wrong, but not sure exactly how. I figured you guys would have fun tearing them apart.

MyblackS13

Those arms hurt my eyes. They will sit flatter/lower like they are correcting roll center, but the centerline of the ball joint to the centerline of the spindle is all that matters. Plus putting the kink in the arm introduces a potential bending stress since there is no longer metal in a straight line between the ball joint and the pivot pt of the bushing.

__________________
Dustin - S13 Build
LS1 Inside

stuckonfresh

The guys at HeatMaker helped me with a rack relocation. Moves rack brackets 25mm forwards.
225

Link:
http://heatmaker.bigcartel.com/produ...nt-crossmember

__________________
Instagram: @cleantune

PoorMans180SX

Just FYI guys, over the course of this week I'm going to be overhauling the original posts, so if they're all jacked up for a bit, you now know why, haha.

__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.

PoorMans180SX

Driftworks just released pre-orders for Geomaster V3! compilation with wisefab. Drift and grip settings on front knuckle. New rear knuckle with revised kinematics.

__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.

PoorMans180SX

First two posts updated. Let me know what you guys think, or if you have any input!

__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.