dark-knight

well i got my motor in (s13 redtop sr20) but still running into some problems.

i have a nipple on the intake manifold side that i cant figure out where it goes? any one have a clue, heres a pic:


and i checked over my entire wiring harness (ka harness) and i cant find a clip or anything for this. can i run without it or is it important:


and last but not least when i had everything in except for that hose and the ground clip, this is what my car would do. it wouldnt turn over or anything, the clock would just lose it's light and that all.

flip3d

Just cap the nipple off if you cant find anything that goes to it.

The sensor is for the temp gauge in your dash.

Is your starter hooked up right? Which lower harness did you use?

dark-knight

it's a stock ka harness wired for sr20's i'll cap the nipple off and see how that goes, when i had the manifold on, coolant would just come leakin out.

RedtopTech

that nipple is fpr the throttle body. Its for emission purpose however i would reccomend connecting it if you live in a cold climate as it improves drivabilty.

dark-knight

well i live in hot as hell florida (jacksonville) does anyone have a diagram for the intake manifold, like what hoses go where and what not.

flip3d

does the starter click at all when you turn the key?

if it doesnt, you might not have it wired right. if it does, your batt might have enough juice or the solenoid is dead.

when i first did my swap, the starter would just click. i swapped the solenoid from an extra starter i had and it fired right up.

BlackTruenoAE86

Was your car auto before?

__________________
-Emilio

dark-knight

i hear the relay click once, but the starter doesnt do anything. and the car was always a 5-speed. what about that sensor, how would i figure that out, the temp gauge worked before, but i checked the harness and theres no clip or anything.

flip3d

I'll have to look at my car tomorrow. I'll try to help but I'm running the SR lower harness so its not completely the same.

TTrx7Pete

Hey dark-knight, I'm also in Jacksonville... what side of town are you on?

__________________
1993 AW Mazda RX-7
1997 Nissan Silvia

S14DB

battery charged?

__________________
Comments should be taken as Opinions not as Statements of Fact

drftthatshit

the one sensor on the left the yellow one is the temp sensor to the ecu it tells the computer to run rich or lean depending on coolant temp the other smaller one is for the cluster in side the car it is only a one wire and should be black dont quote me on that but i belive that it is black as for you starting from watching the vid whay dont you mount the battery down and check all your connections relays fuses also check voltage at the battery and the starter hope this all helps let me no

singlecamslam

try push starting it.

__________________
Nothing says racecar like a stock car with no interior.

aNskY

Dont do that. charge your battery.

the nipple is for coolant to your Tb as already stated. you can loop it to the return side of the tb loop or just get the hose. and the coolant temp sensor is correct, the thing is useless. get a real gauge.

dark-knight

im on the west side of town, all the help would be great, i'm gonna go out to the garage for alil bit and hook the stuff up, also theres another problem i forgot about:
my clutch is very very very soft, and it;s a brand new ACT 6-puck clutch kit. i took the dampen box out and bled the clutch line but still weak, possibly the master cylinder?

aNskY

are you sure you are bleeding it properly? no air left at all? if so, gotta be the master.

dark-knight

i guess i will try and find a master cylinder and try that, but like i'll push the clutch down and it's real easy, and sometimes it wont come back up, and if it does it will come up like an inch

aNskY

how did you bleed it?

dark-knight

from the slave cylinder, we would pump the clutch like 10 times, hold it, then bled at the slave, and repeat..

aNskY

i bet you still have air in the line, try doing one pump at a time (pedal down, open valve till fluid stops, close valve pedal up, repeat) . it's tedious but it works better. or splurge on a speed bleeder

TTrx7Pete

Ah I'm in the Regency area and in Fruit Cove on the weekends.

__________________
1993 AW Mazda RX-7
1997 Nissan Silvia

dark-knight

oh, i pass the regency mall alot for work, but thats all i do over there..lol