brn2slid

Parts are listed very randomly, I will try to clean it all up when I get time. Also, I will be coming across more parts as I find them, so keep up.
Thanks

All parts with * have less than 4k unless otherwise mentioned:
*Tein Super Drift coilovers - SOLD
*Tein Tension rods - 200
*Tein tie rods - 120
*Tein strut bar Front and Rear - SOLD
*Ksport rear camber - SOLD
*Ksport rear toe - 130
*Driveshaft shop 1pc steel driveshaft (7k) - SOLD
*Kaaz 2-way LSD in pumpkin with a box of Kaaz fluid - 700 for diff - 49.50 per can of fluid, will cut a deal if you buy it all from me
*Greddy profec b(7k) solenoid is funky - 150
*AEM wideband(7k) - SOLD
*Defi blue racer Oil PSI - 200
*Center vent 2 gauge pod - SOLD
*S13 Digital climate control already converted ready to plug and play, all sensors included - SOLD
*3" straight back exhaust to Apexi N1 gunmetal muffler(7k on piping, not sure on muffler but it muffles as any other N1) - 250









Brand New parts:
Comp clutch flywheel - 270 to add, I found my old clutch setup with about 5k on it, ACT 1x pressure plate and unsprung 6-puck disc - 450 for the full set
EBC complete brake setup with russell SS lines - 500
SR S13 Koyo Rad - SOLD
FAL 345 shrouded fans - SOLD


Bought these a while back thinking i would use them but i dont think i am now..

the have some rash, good tires 250

Top and bottom are the rear, middle two are the fronts. As you can notice, the top one has a little bit of camber wear, no cords showing at all. The middle two are perfect tires with lots of life left, the bottom is just a monstrous tire with no camber wear and lots of life left


Rear #1, taped off, I was going to clean them up a bit

Rear #2- clear chipping off, worst wheel of all, sand down clear and reshoot

Front #1

Front#2



Brand new Apexi Neo, still in box - 300

Defi D-gauge
Boost - 150
EGT- missing sensor make offer
225 for both


Autometer pro-lite shift light - 30


Autometer RPM switch - 70


S13 EBC Brakes (rotors/pads/lines) - 500


Memphis coaxials 6.5 - 80


2 x Diamond 5.25 - 80





MSD Digital 6 - 200
MSD Blaster 2 coil - 20




A/C Autotechnic oil pressure - 40
A/C Autotechnic volt - 40


Eclipse 55090 – 300


Eclipse vm7211 – 200


1 Breather tank with fittings - 20


Magnaflow 3" muffler w/hanger - 160



as an addition, I also have, but no pictures of:

S14 Zenki headlights (yes, the "JDM" ones) one has been cut to attempt retrofit by previous owner
S14 95-96 USDM headlights
S14 Zenki circuit sports clear headlight lenses
TSX Projectors (no bulbs/ballasts)
For all of this -

Toyota HID's, not sure which... PM for details if interested

HKS SSQV BOV - 150

Z32 TT wheels - 250

Precision Power PC2150
2 x 150W @ 4 ohms
2 x 300W @ 2 ohms
1 x 600W @ 4 ohms bridge
Asking $old

Eclipse SW7200 12" Dual 4 Ohms Titanium DVC Series Subwoofer
Peak: 1500 watts
RMS: 500 watts
Impedance: Dual 4 ohms
in box
Asking $old

Memphis 16-MC3004
4 x 75W @ 4 ohms
4 x 115W @ 2 ohms
2 x 230W @ 4 ohms bridge
Asking $180

Diamond Audio TDX 10 dual 2 ohm
Price: 350

Eclipse 32440 4/3/2 4ch amp
Price: 280

Eclipse CD7000
Asking $300

180sx Tail lights (L/R/Center garnish)

180sx/Silvia Vin plate

Twin Cam Turbo Charged under tail valence in black

180sx/Silvia cluster



Many more items to come, PM me for any info you may need regarding parts or purchasing info

d0pe240

pics of 180sx tails please.

brn2slid

Will do sir, with prices too... It's be tomorrow or Tuesday the latest

hey808

Are those stainless brake lines for stock S13 fronts, or for Z32? If for stock S13 wanna sell just the lines? Email me at: [email protected]

__________________
Bob
'92 Coupe

Drift_This

Damn I'd love to get that digital climate control if I had the money.

PS where did you get the center vent gauge pod?

WheelWhore

I want the breather tank. pm me.

catthefish

i want the climate control email me [email protected] see how we can figure shipping, let me know

brn2slid

They are for stock 13 but selling as a package deal as of now

Let me know when you get the spare cash, and ebay has a wide selection of the vent pods

PM sent

PM sent

For future reference, please pm me.

As for the pictures, I have been really busy lately and have not had time yet but I will get to them as soon as I can. Thank you for your patience.

deadghost

Pm sent, im down to take the DCC.

__________________

IG Holy_khal

240orNothin'

Tie rods shipped to 32837 , how much would that be

brn2slid

Smaller items such as this would be standard usps flat rate

brn2slid

Bump! Been too busy to get all pictures, if there is a part you want, and have cash ready to give me, I'll make sure I get you a picture or two

KC_240sx

still have the parts?

brn2slid

what are you going for? Shoot me a pm

brn2slid

I have a couple more photos, if interested, please let me know I'll get them to you as soon as I can. Parts need to get gone! Shoot me a pm with any of your wants and needs! As long as it's on my list, of course

brn2slid

I know you guys want this stuff, make them offers... Lock me up

brn2slid

can take trades for 18" wheels 5x114.3 mid 30 offset or lower, imac/macbook, its a stretch, but, nrg short hub and lock for 97-8 240sx, 4 circuit sports exhaust hangers, greddy or HKS sr fuel rail, ID1000cc injectors, more to come as i think of it.

FYI, this goes for everything I have for sale, in all my threads.

240knockout

pics of tension rods

brn2slid

Sorry for the delay, I'll get pictures hopefully Tuesday next week

racerx2k1

2 bump limit. You can start new thread in 3 days.

__________________