FL FS: LSX s13 coupe - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

boostergod · 10-24-2011, 08:39 AM

Well im up in nj but ima be down there over the winter and if its still avaible then Ill check it out and make u a offer

s13tmont · 10-24-2011, 10:56 AM

Quote:

Originally Posted by mx597turbo

No one still has the yellow "Made in Germany" springs anymore. They only have the blue "Made in Mexico" springs. These are still good, and come stock on the LS3 C6 and Camaro. I have them in my C5, rev to 7k, and have no problems.

BTW, when you do this job, make sure to get the Proform LS Valve spring compressor. It makes the job very easy, you can do two springs at once. It costs about $70, and is well worth it. Also, don't use an air holder. Just take 1/4" nylon rope. Put it in the cylinder through the spark plug hole, and turn the engine until it stops. It holds the valves perfectly, and takes way less time than that stupid air holder. Not to mention, I could never get the air holder to actually get a good seal and hold the valve.

I'm not sure what you mean by the yellow "Made in Germany" springs, but they are the ls6 springs that have the yellow marking. With them shimmed, they are capable of about a .560 lift whereas the ls6 zo6 cam is right around .551, so these are plenty capable of what I'm going for. Thanks for the heads up on the install though, I'm going to look into both of the things that you posted.

Quote:

Originally Posted by boostergod

Well im up in nj but ima be down there over the winter and if its still avaible then Ill check it out and make u a offer

Well when you come down, don't be afraid to come take a look. I'm in no rush to sell this thing.

mx597turbo · 10-24-2011, 12:55 PM

I mean that there are no more yellow springs. The springs are blue now. The specs are exactly the same as the yellow ones, I ordered the yellow springs when I changed mine, but I got blue ones. I called and was told GM doesn't make the yellow ones anymore. They used to be made in Germany, now they're made in Mexico.

Also, make sure you have a few extra of the valve locks (the half-circle things that hold the valve in the retainer). Buy them when you get the springs, or you will be heading to the GM dealer to buy some when you do the job. Ask me how I know

slippinsideways · 10-24-2011, 01:37 PM

Quote:

Originally Posted by mx597turbo

I mean that there are no more yellow springs. The springs are blue now. The specs are exactly the same as the yellow ones, I ordered the yellow springs when I changed mine, but I got blue ones. I called and was told GM doesn't make the yellow ones anymore. They used to be made in Germany, now they're made in Mexico.

Also, make sure you have a few extra of the valve locks (the half-circle things that hold the valve in the retainer). Buy them when you get the springs, or you will be heading to the GM dealer to buy some when you do the job. Ask me how I know

You can still get new yellow springs from GM. All you need is the original part number (aka pn. for yellow springs. not the updated pn. for "updated pn. 99665544 blue springs") and the dealer can track down who already has the springs in stock. Basically you are finding a dealer somewhere who has them on the shelf and never sold them instead of your dealer ordering from one of the wearhouses. - I'm a GM tech. we deal with these "updated" part numbers all the time on all sorts of parts
-Now you would only need to do this if you did not trust the new made in mexico blue springs.

also, a magnet helps on the spring retainer locks.

And for the love of all that is LS just take the heads off to do the job, clean them and have the valve guides and seats checked and then do the springs/seals. then you'll have a nice fresh top end with new gaskets, head bolts, clean the valley cover, etc.. (just dont shove some string in your engine)

jr_ss · 10-24-2011, 05:18 PM

Quote:

Originally Posted by slippinsideways

You can still get new yellow springs from GM. All you need is the original part number (aka pn. for yellow springs. not the updated pn. for "updated pn. 99665544 blue springs") and the dealer can track down who already has the springs in stock. Basically you are finding a dealer somewhere who has them on the shelf and never sold them instead of your dealer ordering from one of the wearhouses. - I'm a GM tech. we deal with these "updated" part numbers all the time on all sorts of parts
-Now you would only need to do this if you did not trust the new made in mexico blue springs.

also, a magnet helps on the spring retainer locks.

And for the love of all that is LS just take the heads off to do the job, clean them and have the valve guides and seats checked and then do the springs/seals. then you'll have a nice fresh top end with new gaskets, head bolts, clean the valley cover, etc.. (just dont shove some string in your engine)

Compressed air works as well to keep the valves closed...

rad244 · 10-24-2011, 10:06 PM

this car still for sale man?hit me up 702-245-2676 I'm very interested.thanks for your time.

slippinsideways · 10-24-2011, 10:53 PM

Quote:

Originally Posted by jr_ss

Compressed air works as well to keep the valves closed...

yes... they make a J tool for it... I never said no air. It's just nice when you are capable of doing the work to go the extra step and make it nice.

one clean 300z · 11-11-2011, 07:10 PM

Trade ?? http://zilvia.net/f/cars-sale/418682...ml#post4349791

Purestock240 · 11-11-2011, 07:25 PM

any videos of it pulling?

MasonBarnard · 11-22-2011, 07:30 PM

im guessing its sold

s13tmont · 11-23-2011, 11:44 AM

Nope, car is still for sale. Although, I'm not really pushing to hard to sell just because I've been still adding things to the car.

Energy Master bushing set is in the works, New LCA's and balljoints, new tie rod ends...

02 zo6 cam, springs and pushrods as well as a SLP underdrive pulley is going on this weekend with a new tune. At this point, I'd have to get very close to my asking price.

bora28 · 11-23-2011, 08:59 PM

Where in Florida are you? I might be interested it this... seriously

btw, tried to PM, box full

Boostin 240 · 11-23-2011, 10:18 PM

SO clean GLWS

macspeed702 · 11-24-2011, 10:06 AM

really nice and put together 240sx. and not bad price

free bump nor nice ride

s13tmont · 11-25-2011, 12:52 PM

Quote:

Originally Posted by bora28

Where in Florida are you? I might be interested it this... seriously

btw, tried to PM, box full

Sorry about that, I cleaned out my PM's.

The car is located in the Panhandle of FL, Panama City Beach.

Edit: Also added a few more picture to the first post.

lex_s13 · 12-14-2011, 02:24 AM

man this is dope, might have to seriously consider picking it up after Christmas. when are you available to show it?

dr. picklez · 12-14-2011, 10:59 AM

im down in SFL and I might be able to pick this up if someone buys my F250 this week

s13tmont · 12-14-2011, 01:15 PM

Lex, I'm available whenever to show it! Since Pcola is close to PCB, I'd be willing to meet yo in Destin if that's cool, contact me through email or PM's to set this up!

Dr. Picklez, where in SFL are you located? If your F250 does sell, contact me and I'd be willing to work out a hell of deal on this!

I found the next car I want so anyone with some cash could obviously persuade me into getting rid of it for the right price! Let me know!

EDIT: A quick video of a 1st through 3rd gear pull was added!

MrMintyFresh · 12-21-2011, 12:36 AM

still for sale?

kouki83 · 12-21-2011, 04:45 AM

interested on my rhd silvia white?

Coleosis · 12-21-2011, 05:47 AM

Wheels = sex
Engine = sex
t56 = sex

Why would you sell that? Cant handle all the poon it pulls? Clean car, If I had 10k, I'd definitely look at it.

s13tmont · 12-21-2011, 10:38 AM

Quote:

Originally Posted by MrMintyFresh

still for sale?

Car is still for sale.

Quote:

Originally Posted by kouki83

interested on my rhd silvia white?

PM me pictures, ect.

Quote:

Originally Posted by Coleosis

Wheels = sex
Engine = sex
t56 = sex

Why would you sell that? Cant handle all the poon it pulls? Clean car, If I had 10k, I'd definitely look at it.

Hahaha, thanks bud. It's just time for something newer since me and the girlfriend will be going off to college and sharing a car. I don't even want to teach her to drive this.

EDIT: COUPLE MORE VIDEOS WERE ADDED TO THE ORIGINAL POST!

DinoMan · 12-21-2011, 11:10 AM

This thing is sick....GLWS

RBbrandon20 · 12-21-2011, 12:07 PM

I PM'd you with a trade.
http://mitsustyle.com/forums/showthread.php?t=30868

JDMtyteYO! · 12-21-2011, 04:19 PM

hmmm...both my girl an i are waiting on ins money... shes getting hers first soooo might have to borrow some from her LOLLL

s13tmont · 12-21-2011, 04:29 PM

Save up and let me know! The car has a lot of interest on it!

ZenkiCam · 12-21-2011, 06:01 PM

Trade for the s13 I have listed?

And funny story, I know all the Florida people get hated on but just to add to that, I showed my girlfriend this car and she said where is it at I said Florida and even she said No.. Florida people were stupid lmao!

JDMtyteYO! · 12-21-2011, 06:24 PM

insurance** dont need to save up :P just need to wait a little longer haha

s13tmont · 12-21-2011, 06:36 PM

Quote:

Originally Posted by ZenkiCam

Trade for the s13 I have listed?

And funny story, I know all the Florida people get hated on but just to add to that, I showed my girlfriend this car and she said where is it at I said Florida and even she said No.. Florida people were stupid lmao!

Haha, no thanks man. Trying to get out of the 240 world.

But after looking at it, shit is super clean...

and maybe interested in trading for that jeep?

Quote:

Originally Posted by JDMtyteYO!

insurance** dont need to save up :P just need to wait a little longer haha

Let me know when the wait is up!

RBbrandon20 · 12-21-2011, 08:27 PM

So I'm taking that as a no on my trade offer than?

11-23-2011, 11:44 AM	#41
s13tmont Zilvia Member Join Date: Mar 2008 Location: FL Age: 29 Posts: 171 Trader Rating: (3) Feedback Score: 3 reviews	Nope, car is still for sale. Although, I'm not really pushing to hard to sell just because I've been still adding things to the car. Energy Master bushing set is in the works, New LCA's and balljoints, new tie rod ends... 02 zo6 cam, springs and pushrods as well as a SLP underdrive pulley is going on this weekend with a new tune. At this point, I'd have to get very close to my asking price. __________________

11-23-2011, 08:59 PM	#42
bora28 Join Date: Jul 2011 Location: MN Age: 38 Posts: 35 Trader Rating: (2) Feedback Score: 2 reviews	Where in Florida are you? I might be interested it this... seriously btw, tried to PM, box full Last edited by bora28; 11-24-2011 at 07:57 PM..

12-14-2011, 01:15 PM	#48
s13tmont Zilvia Member Join Date: Mar 2008 Location: FL Age: 29 Posts: 171 Trader Rating: (3) Feedback Score: 3 reviews	Lex, I'm available whenever to show it! Since Pcola is close to PCB, I'd be willing to meet yo in Destin if that's cool, contact me through email or PM's to set this up! Dr. Picklez, where in SFL are you located? If your F250 does sell, contact me and I'd be willing to work out a hell of deal on this! I found the next car I want so anyone with some cash could obviously persuade me into getting rid of it for the right price! Let me know! EDIT: A quick video of a 1st through 3rd gear pull was added! __________________ Last edited by s13tmont; 12-14-2011 at 02:45 PM..

12-21-2011, 04:29 PM	#56
s13tmont Zilvia Member Join Date: Mar 2008 Location: FL Age: 29 Posts: 171 Trader Rating: (3) Feedback Score: 3 reviews	Save up and let me know! The car has a lot of interest on it! __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-24-2011, 08:39 AM	#31
boostergod Leaky Injector Join Date: Oct 2011 Location: nj Posts: 94 Trader Rating: (0) Feedback Score: 0 reviews	Well im up in nj but ima be down there over the winter and if its still avaible then Ill check it out and make u a offer

10-24-2011, 12:55 PM	#33
mx597turbo Join Date: Oct 2011 Location: NJ Age: 40 Posts: 17 Trader Rating: (0) Feedback Score: 0 reviews	I mean that there are no more yellow springs. The springs are blue now. The specs are exactly the same as the yellow ones, I ordered the yellow springs when I changed mine, but I got blue ones. I called and was told GM doesn't make the yellow ones anymore. They used to be made in Germany, now they're made in Mexico. Also, make sure you have a few extra of the valve locks (the half-circle things that hold the valve in the retainer). Buy them when you get the springs, or you will be heading to the GM dealer to buy some when you do the job. Ask me how I know

10-24-2011, 10:06 PM	#36
rad244 Join Date: Sep 2011 Location: Las vegas Age: 28 Posts: 22 Trader Rating: (0) Feedback Score: 0 reviews	this car still for sale man?hit me up 702-245-2676 I'm very interested.thanks for your time.

11-11-2011, 07:10 PM	#38
one clean 300z Zilvia Junkie Join Date: Jan 2009 Location: carolina beach Age: 33 Posts: 380 Trader Rating: (0) Feedback Score: 0 reviews	Trade ?? http://zilvia.net/f/cars-sale/418682...ml#post4349791

11-11-2011, 07:25 PM	#39
Purestock240 Zilvia FREAK! Join Date: Aug 2010 Location: On, Canada Age: 27 Posts: 1,158 Trader Rating: (8) Feedback Score: 8 reviews	any videos of it pulling?

11-22-2011, 07:30 PM	#40
MasonBarnard Zilvia Member Join Date: Sep 2010 Location: Chicago Posts: 237 Trader Rating: (0) Feedback Score: 0 reviews	im guessing its sold

11-23-2011, 10:18 PM	#43
Boostin 240 Join Date: May 2010 Location: P.A. Posts: 39 Trader Rating: (0) Feedback Score: 0 reviews	SO clean GLWS

11-24-2011, 10:06 AM	#44
macspeed702 Join Date: Aug 2011 Location: shreveport LA Age: 46 Posts: 29 Trader Rating: (0) Feedback Score: 0 reviews	really nice and put together 240sx. and not bad price free bump nor nice ride

12-14-2011, 02:24 AM	#46
lex_s13 Join Date: Apr 2011 Location: Pensacola Age: 36 Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	man this is dope, might have to seriously consider picking it up after Christmas. when are you available to show it?

12-14-2011, 10:59 AM	#47
dr. picklez Join Date: Feb 2010 Location: Florida Age: 30 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	im down in SFL and I might be able to pick this up if someone buys my F250 this week

12-21-2011, 12:36 AM	#49
MrMintyFresh Leaky Injector Join Date: Nov 2011 Location: Kc Posts: 52 Trader Rating: (0) Feedback Score: 0 reviews	still for sale?

12-21-2011, 04:45 AM	#50
kouki83 Join Date: Feb 2010 Location: miami fl Age: 37 Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	interested on my rhd silvia white?

12-21-2011, 05:47 AM	#51
Coleosis Join Date: Dec 2011 Location: Oklahoma Age: 35 Posts: 17 Trader Rating: (0) Feedback Score: 0 reviews	Wheels = sex Engine = sex t56 = sex Why would you sell that? Cant handle all the poon it pulls? Clean car, If I had 10k, I'd definitely look at it.

12-21-2011, 11:10 AM	#53
DinoMan Zilvia Junkie Join Date: Feb 2011 Location: Pensacola Fl Age: 26 Posts: 362 Trader Rating: (2) Feedback Score: 2 reviews	This thing is sick....GLWS

12-21-2011, 12:07 PM	#54
RBbrandon20 Leaky Injector Join Date: Dec 2011 Location: Alexandria Age: 27 Posts: 91 Trader Rating: (0) Feedback Score: 0 reviews	I PM'd you with a trade. http://mitsustyle.com/forums/showthread.php?t=30868

12-21-2011, 04:19 PM	#55
JDMtyteYO! Zilvia Addict Join Date: Feb 2009 Location: SFL Age: 31 Posts: 906 Trader Rating: (20) Feedback Score: 20 reviews	hmmm...both my girl an i are waiting on ins money... shes getting hers first soooo might have to borrow some from her LOLLL

12-21-2011, 06:01 PM	#57
ZenkiCam Zilvia Addict Join Date: Jun 2007 Location: Atlanta Georgia Posts: 931 Trader Rating: (4) Feedback Score: 4 reviews	Trade for the s13 I have listed? And funny story, I know all the Florida people get hated on but just to add to that, I showed my girlfriend this car and she said where is it at I said Florida and even she said No.. Florida people were stupid lmao!

12-21-2011, 06:24 PM	#58
JDMtyteYO! Zilvia Addict Join Date: Feb 2009 Location: SFL Age: 31 Posts: 906 Trader Rating: (20) Feedback Score: 20 reviews	insurance** dont need to save up :P just need to wait a little longer haha

12-21-2011, 08:27 PM	#60
RBbrandon20 Leaky Injector Join Date: Dec 2011 Location: Alexandria Age: 27 Posts: 91 Trader Rating: (0) Feedback Score: 0 reviews	So I'm taking that as a no on my trade offer than?