Neejay

I need to know the height of a Nismo KA24DE motor mount, without studs (mount plate to mount plate). I also need to know the height of some worn KA mounts. I have neither available to me. Solid info only please!

I found a thread from a search, but it only referenced memory, nothing solid... (http://zilvia.net/f/2285910-post6.html)

blackrms13

help?
or not really?
its about like 1-2 cm taller

__________________
91' 240sx Fastback LE

Neejay

Well, if I had some sort of size reference in the pic (i.e. 12oz can soda, 20oz bottle, spray paint can, etc.). lol

Thanks for at least trying to help though!

Is that a stock mount or Nismo or what?

blackrms13

left is Nismo
right is OEM thats in 2 piece
if i didnt threw them in the trash can, i'd make some measurement of the OEM ones...but yeah

__________________
91' 240sx Fastback LE

Neejay

Ah, ok. Actually, that does help.

fliprayzin240sx

What are you trying to do Neejay?

__________________

If you think Zilvia has too many assholes...
CLICK HERE!!!

!Zar!

I think it's something like the thickness of two hockey pucks...

I'll have to find one and measure it up.

A new stock mount should be about the same height as a nismo mount.

__________________

Neejay

My RB25 sits too high with the ruckus-racing mounts (uses stock KA mounts instread of rubber isolators). I have Nismo mounts with less than 1,000 miles on them. I bought some oem replacement mounts for a volvo, but because of how short they were, the mount bracket from the ruckus-racing rested on top of the mount at an angle. So Im thinking they have to be used with a mount within range of a stock KA mount...hence me needing a worn down KA mount which will be shorter than Nismo/New mount. Then I'll fill it in with urethane or hard silicone/rubber for support.
I think it's taller than 2 hockey pucks. At least I thought, since 2 hockey pucks are 2" on top of each other.

I'm thinking I need a mount that's about 2.25". I may have to make my own using flexane 94.