95zilvia

PM me your tele number so i can meet you up and pick up an intake.
Much rather do that than email.

fredbblakemore

Paypal sent!

WILDACEX187

will i be able to get this at a later time if the group buy ends? i dunno when i will have time to put my motor in yet.

__________________
SR POWA COUPE LUVVV!!!

Pepperoni

Well, I have a few left. I'm waiting for some money orders to come in the mail so I have some on hold. When you're able to afford it, just PM me. I may extend the group buy if there's enough interest after these are gone.

Nostradamus

I sent you payment but will let you know what I need in a few days.

__________________

Pepperoni

Thanks, i have one set aside for you

dasalnt

will this work with the gt28 turbo? I would assume so but i want to be 100% sure before i order. Also, i just ordered my intercooler and hotpipe so i dont know exactly where my bov is going to be on the hotpipe, will that cause a problem for you? Thanks

Pepperoni

If the inlet on the gt28 is the same direction as the stock t25, it should work. It may be a problem if you dont know where your BOV is; in that case you might want to get kit 1 instead. I could weld the recirc. bung in the stock location but that doesnt mean your BOV will be anywhere near that. PM me if you have any other questions.

lok

I sent payment with what I want in the comments.

Thanks,

nissanguy13

Do you have room for anymore on this order or are you full? If you do, please let me know and Ill send you the $$$, I believe i need stock turbo kit#2. What is the difference between kit#1 and kit#2. What part of NorCal are you in?

Pepperoni

Thanks! It will be shipped on Monday. I'll email you the tracking number.

I have room for a couple of people more. Difference between kit 1 and 2 is that kit 2 has the recirculation bung welded onto the pipe for the BOV. If you want to recirculate your BOV, get kit 2 and send me a pic, or if you dont care for recirculating then just get kit 1. I'm in the peninsula. PM me if you want to meet up.

95zilvia

i told you im ready to buy, where you want to meet up,
im still waiting for a contact number.

dasalnt

the hotpipe that i am getting doesnt have a flange for the bov yet so i guess i could weld the flange according to where you put the bung for the recirculation. As long as you dont have it welded in an awkard place. I'm really not sure if the inlet of the the gt28 is the same as the t25, do you have a pic? I'm really interested and would like to purchase this asap but i dont want to buy something that wont work. thanks!

SirWarrior

Dude, U officially rock!
I was actually thinking about doing this myself, but I am lazy and broke ATM
Can I contact you in 2 weeks for getting the Kit1 made??? (catch no BOV)

__________________
92 FastBack - Project
98 SE - Daily Driver

Rusker

I'm ready to buy kit #2. I was a bung for my BOV to eventually recirculate. Let me know if your holding one for me and I'll send payment.

__________________
1990 S13/SR20

nissanguy13

ok im ready for the beating, what is the difference between kit#1 and kit#2? im getting ready to insall my sr and still learning. i have a greddy front mounted intercooler, and the piping already has a spot for the bov. so does this intake have a spot for the bov, or just a spot for a hose for the bov?

s14slide

I am definately interested in this, but funds are a little tight right now with a new mouth to feed in the house. So hopefully you keep this going, or maybe take an order later on.

__________________
= My day

Pepperoni

Hey guys,
I think i may need to stop taking payments because all the pipes are basically accounted for. If there's enough interest, i'll extend the group buy.

Thanks everyone! PM me if you're still interested to buy one in the near future.

**** Please see my post further down****

Rusker

So, you didn't hold one for me? Kit #2?

__________________
1990 S13/SR20

nissanguy13

ya im still interested, im not sure if you held a spot for me? I need whatever kit looks just like the rubber stock intake. is that kit#1 or kit#2?

Pepperoni

If I held one from you, you should expect a PM one of these days. I'm still doing a count/shipping. Thanks

nissanguy13, it would be kit 2

Pepperoni

oh, and i was only able to hold pipes who put money down first. I need to take care of payers first and then if there are any pipes left i'll contact those of you who PM'd me first who showed interest.

*** There seems to be more than enough interest, just that funds seem to be an issue. I'll be extending the group buy - I'll be accepting payments in about 2 weeks and will post here when the group buy is active again.

You can send payment now to ensure you have a pipe on hold for you, or you can wait until I post when i'll be able to make the pipes again. (~2 weeks)

If you have any questions, feel free to email me or PM me. Thanks

go240

sweet, i'll be up for one - i'll be on the look out for the next gb

__________________

nissanguy13

cool, when you get more in let me know and ill put the $$ down for kit#2, thanks

Rusker

Well when you get more e-mail me.

__________________
1990 S13/SR20

Reos77

I am definately interested please email me, when more become avialable. [email protected]. Money is not an issue.

shiftnslide

Aure is the man- sent him pictures of my setup and he was mega helpful about my questions. Can't wait to get it.

sblack13

just got my intake pipe kit, could't be happier. Thanks aure! Everyone order up!!!

Tenchuu

I'll definately be interested in the future... too many bills for this paycheck

Pepperoni

Thanks for the feedback! Glad it worked out for you

Aluminum should be coming in sooner than I thought, hopefully within a week or so