Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Chat

Chat General Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 01-02-2010, 07:38 PM   #121
AE_Racer
Zilvia Addict
 
Join Date: Feb 2005
Location: Lost in the woods of FAILorida
Age: 33
Posts: 777
Trader Rating: (9)
AE_Racer is an unknown quantity at this point
Feedback Score: 9 reviews
looks like they only make 30mm fenders, from that company

Car and truck body kits & parts for mx3, s10, SUV, civic, neon, focus, etc.
__________________
http://tougestars.net
AE_Racer is offline   Reply With Quote
Sponsored Links
Old 01-02-2010, 07:46 PM   #122
TonyToniTuna
Leaky Injector
 
TonyToniTuna's Avatar
 
Join Date: Sep 2009
Location: NC
Posts: 103
Trader Rating: (2)
TonyToniTuna is an unknown quantity at this point
Feedback Score: 2 reviews
Recently hit a curb in my S13....bent my LCA to hell...replaced the LCA...and the hub was still tilted in positive camber....messed around with the UCA and put the car back on the ground...and the tire still leans out just a bit with some positive camber...did i possibly bend something else? UCA? Spindle? any suggestions? i was thinking about getting an alignment...but i dont want to spend money when something else could be bent...

TonyToniTuna is offline   Reply With Quote
Old 01-02-2010, 07:50 PM   #123
AE_Racer
Zilvia Addict
 
Join Date: Feb 2005
Location: Lost in the woods of FAILorida
Age: 33
Posts: 777
Trader Rating: (9)
AE_Racer is an unknown quantity at this point
Feedback Score: 9 reviews
check your subframe for tweaks. might not be enough to see with the naked eye though...i assume you already checked your hub/knuckle?
__________________
http://tougestars.net
AE_Racer is offline   Reply With Quote
Old 01-02-2010, 07:55 PM   #124
TonyToniTuna
Leaky Injector
 
TonyToniTuna's Avatar
 
Join Date: Sep 2009
Location: NC
Posts: 103
Trader Rating: (2)
TonyToniTuna is an unknown quantity at this point
Feedback Score: 2 reviews
Yea i looked over the spindle/hub but didnt look bent...yea its a weird situation....*sigh*
TonyToniTuna is offline   Reply With Quote
Old 01-02-2010, 09:12 PM   #125
95KA-Turbo
Post Whore!
 
95KA-Turbo's Avatar
 
Join Date: Jul 2005
Location: LA
Age: 36
Posts: 3,402
Trader Rating: (19)
95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of
Feedback Score: 19 reviews
Quote:
Originally Posted by XnTroubleX View Post
So as far as what to buy, i just need to get a S13 DOHC gauge cluster?
I am not sure, it is a pretty common thing, you should be able to find it in a search on here.


bdubnyc - check your actual shock tower, if you bent the LCA that bad I wouldn't be surprised if your whole front frame rail was tweaked.
__________________

Instagram - SJKnoop
95KA-Turbo is offline   Reply With Quote
Old 01-02-2010, 09:23 PM   #126
TonyToniTuna
Leaky Injector
 
TonyToniTuna's Avatar
 
Join Date: Sep 2009
Location: NC
Posts: 103
Trader Rating: (2)
TonyToniTuna is an unknown quantity at this point
Feedback Score: 2 reviews
Quote:
Originally Posted by 95KA-Turbo View Post
I am not sure, it is a pretty common thing, you should be able to find it in a search on here.


bdubnyc - check your actual shock tower, if you bent the LCA that bad I wouldn't be surprised if your whole front frame rail was tweaked.
Front frame rail? this is the rear lower control arm...i guess i should peep at the subframe...idk if it would be easy to spot out a bend in it....this fucking sucks..

PS: Oh forgot to mention...the driver side is fine and the negative camber is still fine on the driver side ever since i lowered the car...its just the passenger side where i hit the curb that still has the slight positive camber from hitting the curb.
TonyToniTuna is offline   Reply With Quote
Old 01-02-2010, 11:27 PM   #127
95KA-Turbo
Post Whore!
 
95KA-Turbo's Avatar
 
Join Date: Jul 2005
Location: LA
Age: 36
Posts: 3,402
Trader Rating: (19)
95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of
Feedback Score: 19 reviews
My bad, I didn't read your post right then.

Did you check out all of your arms? I'd check the camber arm itself, and check the areas the arms bolt to on the subframe. Compare to your side that didn't hit.
__________________

Instagram - SJKnoop
95KA-Turbo is offline   Reply With Quote
Old 01-03-2010, 05:27 AM   #128
lflkajfj12123
 
Join Date: Apr 2007
Location:         
Posts: 8,480
Trader Rating: (20)
lflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfection
Feedback Score: 20 reviews
Quote:
Originally Posted by bdubnyc View Post
Front frame rail? this is the rear lower control arm...i guess i should peep at the subframe...idk if it would be easy to spot out a bend in it....this fucking sucks..

PS: Oh forgot to mention...the driver side is fine and the negative camber is still fine on the driver side ever since i lowered the car...its just the passenger side where i hit the curb that still has the slight positive camber from hitting the curb.
if it were me i'd compare all the arms on that side to the opposite side

check for any major differences, at the very minimum you can source all new stock arms as they aren't worth shit
lflkajfj12123 is offline   Reply With Quote
Old 01-03-2010, 06:08 AM   #129
TonyToniTuna
Leaky Injector
 
TonyToniTuna's Avatar
 
Join Date: Sep 2009
Location: NC
Posts: 103
Trader Rating: (2)
TonyToniTuna is an unknown quantity at this point
Feedback Score: 2 reviews
Yea ive compared all the arms to the driver side and they all look fine...i plan on swapping out the upper control arm with another stock one sometime soon and see if that makes any difference.
TonyToniTuna is offline   Reply With Quote
Old 01-03-2010, 12:55 PM   #130
drftkng951
Zilvia Junkie
 
drftkng951's Avatar
 
Join Date: Sep 2007
Location: Riverside,CA
Age: 32
Posts: 529
Trader Rating: (6)
drftkng951 has a reputation beyond reputedrftkng951 has a reputation beyond reputedrftkng951 has a reputation beyond reputedrftkng951 has a reputation beyond reputedrftkng951 has a reputation beyond reputedrftkng951 has a reputation beyond reputedrftkng951 has a reputation beyond reputedrftkng951 has a reputation beyond reputedrftkng951 has a reputation beyond reputedrftkng951 has a reputation beyond reputedrftkng951 has a reputation beyond repute
Feedback Score: 6 reviews
i have a small oil leak behind and around the t stat area of my KA, my suspicion is the upper timing cover. can anyone verify
drftkng951 is offline   Reply With Quote
Old 01-03-2010, 02:06 PM   #131
95KA-Turbo
Post Whore!
 
95KA-Turbo's Avatar
 
Join Date: Jul 2005
Location: LA
Age: 36
Posts: 3,402
Trader Rating: (19)
95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of95KA-Turbo has much to be proud of
Feedback Score: 19 reviews
Wipe it down, and check it out every day. It's kind of hard to diagnose that over the internet, haha.
__________________

Instagram - SJKnoop
95KA-Turbo is offline   Reply With Quote
Old 01-03-2010, 08:37 PM   #132
lflkajfj12123
 
Join Date: Apr 2007
Location:         
Posts: 8,480
Trader Rating: (20)
lflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfection
Feedback Score: 20 reviews
Quote:
Originally Posted by drftkng951 View Post
i have a small oil leak behind and around the t stat area of my KA, my suspicion is the upper timing cover. can anyone verify
or valve cover gasket
lflkajfj12123 is offline   Reply With Quote
Old 01-03-2010, 09:50 PM   #133
JDS Performance
Zilvia.net Advertiser
 
JDS Performance's Avatar
 
Join Date: Jul 2006
Location: Concord, NC
Posts: 3,127
Trader Rating: (53)
JDS Performance is a glorious beacon of lightJDS Performance is a glorious beacon of lightJDS Performance is a glorious beacon of lightJDS Performance is a glorious beacon of lightJDS Performance is a glorious beacon of lightJDS Performance is a glorious beacon of lightJDS Performance is a glorious beacon of lightJDS Performance is a glorious beacon of lightJDS Performance is a glorious beacon of lightJDS Performance is a glorious beacon of lightJDS Performance is a glorious beacon of light
Feedback Score: 53 reviews
Quote:
Originally Posted by KoukiMonsta View Post
can anyone give me info, a video something about AN fittings (oil filter relocation) i cant get these things together!!
Yeah its all on my S13-S14 Intake Manifolds In-Depth & Emissions Removal DVD
JDS Performance is offline   Reply With Quote
Old 01-03-2010, 10:58 PM   #134
zylvia213
Nissanaholic!
 
zylvia213's Avatar
 
Join Date: Aug 2007
Location: LOST ANGELES
Posts: 1,975
Trader Rating: (36)
zylvia213 has a reputation beyond reputezylvia213 has a reputation beyond reputezylvia213 has a reputation beyond reputezylvia213 has a reputation beyond reputezylvia213 has a reputation beyond reputezylvia213 has a reputation beyond reputezylvia213 has a reputation beyond reputezylvia213 has a reputation beyond reputezylvia213 has a reputation beyond reputezylvia213 has a reputation beyond reputezylvia213 has a reputation beyond repute
Feedback Score: 36 reviews
Send a message via AIM to zylvia213
Quote:
Originally Posted by DreamN View Post
Good idea for a thread.

Alright, I've got one that I simply just haven't gotten around to really looking into much.

Once in awhile when I switch the wipers on it simply gets stuck in the on position. Not the switch itself, as I'll put it in the off position and the wipers will still keep going.

It's not the switch as I've tried 3. To my knowledge I haven't messed with the wiring concerning the wipers.

Any ideas where I should be checking first to fix this small, but irritating issue.
Yo Jimbo had the same thing happen to me. I thought it was the switch and it wasnt. I checked the hardness that goes from underneath the driver side to the fender well and the wires that are for the windshield wipers were grounding to bare metal. I guess in my case I had just did the hardness tuck because of my car being low it had chewed up the hardness and didnt noticed they were exposed and just did the tuck. So i took the fender off again and check all the wires there and sure enough them wires were exposed and grounding.... fixed it, put everything back on and everything was back to normal.

Not saying this will fix it but hey give it a try
__________________
zylvia213 is offline   Reply With Quote
Old 01-03-2010, 11:07 PM   #135
zylvia213
Nissanaholic!
 
zylvia213's Avatar
 
Join Date: Aug 2007
Location: LOST ANGELES
Posts: 1,975
Trader Rating: (36)
zylvia213 has a reputation beyond reputezylvia213 has a reputation beyond reputezylvia213 has a reputation beyond reputezylvia213 has a reputation beyond reputezylvia213 has a reputation beyond reputezylvia213 has a reputation beyond reputezylvia213 has a reputation beyond reputezylvia213 has a reputation beyond reputezylvia213 has a reputation beyond reputezylvia213 has a reputation beyond reputezylvia213 has a reputation beyond repute
Feedback Score: 36 reviews
Send a message via AIM to zylvia213
Im not sure if this qualifies but it is a question.... Is there anyone on here from Socal that specialize in electrical? Im having an electrical issue (short) on my S13 and looking for someone that can help a brotha out.
__________________
zylvia213 is offline   Reply With Quote
Old 01-03-2010, 11:16 PM   #136
udon!
Nissanaholic!
 
Join Date: Mar 2009
Location: So-Cal
Posts: 2,025
Trader Rating: (5)
udon! is an unknown quantity at this point
Feedback Score: 5 reviews
Quote:
Originally Posted by udon! View Post
can a title of a car become salvaged if the odometer does not work for a period of time?
anyone?

come on....
udon! is offline   Reply With Quote
Old 01-03-2010, 11:27 PM   #137
franklin93zx
Zilvia FREAK!
 
Join Date: Apr 2009
Location: Riverside, CA
Age: 29
Posts: 1,045
Trader Rating: (11)
franklin93zx is an unknown quantity at this point
Feedback Score: 11 reviews
^ Don't think so, just an electrical problem
franklin93zx is offline   Reply With Quote
Old 01-03-2010, 11:37 PM   #138
Agamemnon
Premium Member
 
Agamemnon's Avatar
 
Join Date: Sep 2003
Location: Lake Stevens, WA
Age: 38
Posts: 2,585
Trader Rating: (20)
Agamemnon is close to perfectionAgamemnon is close to perfectionAgamemnon is close to perfectionAgamemnon is close to perfectionAgamemnon is close to perfectionAgamemnon is close to perfectionAgamemnon is close to perfectionAgamemnon is close to perfectionAgamemnon is close to perfectionAgamemnon is close to perfectionAgamemnon is close to perfection
Feedback Score: 20 reviews
Quote:
Originally Posted by udon! View Post
can a title of a car become salvaged if the odometer does not work for a period of time?
I've never heard of anyone having their title salvaged due to an odo malfunction.

I think you're in the clear.
Agamemnon is offline   Reply With Quote
Old 01-03-2010, 11:45 PM   #139
lflkajfj12123
 
Join Date: Apr 2007
Location:         
Posts: 8,480
Trader Rating: (20)
lflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfectionlflkajfj12123 is close to perfection
Feedback Score: 20 reviews
Quote:
Originally Posted by zylvia213 View Post
Im not sure if this qualifies but it is a question.... Is there anyone on here from Socal that specialize in electrical? Im having an electrical issue (short) on my S13 and looking for someone that can help a brotha out.
http://zilvia.net/f/members/gsxrjjordan.html

i believe he knows a good deal about electrical and wiring
lflkajfj12123 is offline   Reply With Quote
Old 01-04-2010, 12:35 PM   #140
Xbroke_kidX
Zilvia FREAK!
 
Xbroke_kidX's Avatar
 
Join Date: Apr 2008
Location: Mordor
Posts: 1,113
Trader Rating: (8)
Xbroke_kidX is making a name for him/her selfXbroke_kidX is making a name for him/her self
Feedback Score: 8 reviews
Send a message via AIM to Xbroke_kidX
I have a Vertex shift knob with nissan thread pitch, but I know have a toyota. Can I buy just a regular heli coil and take the old on out so it will work with my thread pitch?
Xbroke_kidX is offline   Reply With Quote
Old 01-04-2010, 03:47 PM   #141
XnTroubleX
Zilvia Member
 
XnTroubleX's Avatar
 
Join Date: Nov 2009
Location: louisiana
Age: 37
Posts: 293
Trader Rating: (7)
XnTroubleX is an unknown quantity at this point
Feedback Score: 7 reviews
Does it matter what kind of exhaust manifold gasket I use, does it depend on the manifold that Im using,
SR
Powerlab manifold
XnTroubleX is offline   Reply With Quote
Old 01-04-2010, 03:50 PM   #142
Smurf_240SX
Zilvia Addict
 
Smurf_240SX's Avatar
 
Join Date: Aug 2006
Location: So Cal- I.E
Age: 32
Posts: 879
Trader Rating: (9)
Smurf_240SX has made poor choicesSmurf_240SX has made poor choicesSmurf_240SX has made poor choicesSmurf_240SX has made poor choicesSmurf_240SX has made poor choicesSmurf_240SX has made poor choices
Feedback Score: 9 reviews
Send a message via AIM to Smurf_240SX
Will Q45 brake calipers and rotors clear my rims?

5x114.3 16x8 +14 Front
__________________

FS OEM RB25 PARTS
Smurf_240SX is offline   Reply With Quote
Old 01-04-2010, 04:29 PM   #143
xBtony
Zilvia FREAK!
 
xBtony's Avatar
 
Join Date: Jun 2009
Location: SoCal 661
Posts: 1,481
Trader Rating: (21)
xBtony is an unknown quantity at this point
Feedback Score: 21 reviews
looking at my distributor on my s13 SOHC. should there be another wire comming off the lil tab? maybe a ground or something? idk

xBtony is offline   Reply With Quote
Old 01-04-2010, 04:38 PM   #144
Dazzla
Zilvia Member
 
Join Date: Feb 2008
Location: USA
Posts: 216
Trader Rating: (0)
Dazzla is an unknown quantity at this point
Feedback Score: 0 reviews
edit nvm...

Last edited by Dazzla; 01-04-2010 at 05:13 PM..
Dazzla is offline   Reply With Quote
Old 01-04-2010, 06:30 PM   #145
KoukiMonsta
Nissanaholic!
 
KoukiMonsta's Avatar
 
Join Date: Mar 2009
Location: NC
Posts: 1,969
Trader Rating: (23)
KoukiMonsta is a well-known jackass
Feedback Score: 23 reviews
ok guys so i took the intake mani of my redtop and in the lower portion(connnected to TB) i found oil. like a decent amount. is this bad/normal? thanks
__________________
@UpshiftEngineering
KoukiMonsta is offline   Reply With Quote
Old 01-04-2010, 06:38 PM   #146
stinky_180
Nissanaholic!
 
stinky_180's Avatar
 
Join Date: May 2004
Location: Pale Blue Dot
Age: 36
Posts: 2,064
Trader Rating: (26)
stinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud of
Feedback Score: 26 reviews
Send a message via AIM to stinky_180
Quote:
Originally Posted by xBtony View Post
looking at my distributor on my s13 SOHC. should there be another wire comming off the lil tab? maybe a ground or something? idk
my friend wondered the same thing and grounded that tab. his car started fine but was running weird/abnormal. he took it off and his motor was running like it should. i also have a ka24e and that tab isn't hooked up to anything.
__________________
SoCal RallyX Coverage and MTB Ride Reports
WheelsDirty
stinky_180 is offline   Reply With Quote
Old 01-04-2010, 07:21 PM   #147
twopointo
Zilvia Junkie
 
twopointo's Avatar
 
Join Date: Nov 2008
Location: 805
Posts: 466
Trader Rating: (27)
twopointo is an unknown quantity at this point
Feedback Score: 27 reviews
hey guys i just need a quick advice on how i should install the roof wing on my coupe. what kinda tape should i use or do i have to bolt it on or is there another method of installing it or any helpful advice will do
thanks guys
twopointo is offline   Reply With Quote
Old 01-04-2010, 07:40 PM   #148
hOngsterr
Bandwagon.
 
hOngsterr's Avatar
 
Join Date: Nov 2008
Location: OC (714)
Posts: 4,751
Trader Rating: (73)
hOngsterr is an unknown quantity at this point
Feedback Score: 73 reviews
Send a message via AIM to hOngsterr
3m double sided tape.
__________________
- Hong
Quote:
Originally Posted by jspecusa View Post
OCD isn't so bad just means you'll spend more money then most people, but you'll have a quality car not a POS put together with POS parts.
hOngsterr is offline   Reply With Quote
Old 01-04-2010, 07:47 PM   #149
titopr06
Zilvia Junkie
 
titopr06's Avatar
 
Join Date: May 2008
Location: AL
Posts: 381
Trader Rating: (68)
titopr06 is just really nicetitopr06 is just really nicetitopr06 is just really nicetitopr06 is just really nicetitopr06 is just really nicetitopr06 is just really nicetitopr06 is just really nicetitopr06 is just really nicetitopr06 is just really nicetitopr06 is just really nice
Feedback Score: 68 reviews
my question

I have an hks top feed fuel rail
im looking for 660cc top feed injectors but all of which i have found have low impedance and sr20's use high impedance, how could i make these work? i read about dsm resistor from an eclipse but not sure about this.
titopr06 is offline   Reply With Quote
Old 01-04-2010, 08:22 PM   #150
kalypso123
(ノಠ益ಠ)ノ彡
 
Join Date: Apr 2008
Location: New York, NY
Posts: 2,853
Trader Rating: (2)
kalypso123 is an unknown quantity at this point
Feedback Score: 2 reviews
Quote:
Originally Posted by derek_s13 View Post
wikipedia leverage, specifically the word 'fulcrum' and the result if it's placement on a plane
I understand all of that, but this is more 'car' relevant >>

Quote:
Originally Posted by rbsilvias13 View Post
Most wheels are made to run in the center of the hub so it doesnt put alot of stress on the bearing and when you change that with spacers or an offset wheel it puts more load/leverage on the bearings.
thank you, makes perfect sense that the bearing will wear away from the added leverage.
kalypso123 is offline   Reply With Quote
Reply

Bookmarks

Tags
180sx type x kouki, 1jz, 2jz, 300zx, clutch, faq, ka24de, n/a, non-turbo, question, redtop s13 180sx silvia, s14, search, solenoid, starter, z32, zenki


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:45 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™