Z32 brake hard line and fitting sizes????? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

slidewaysII · 12-16-2013, 12:34 AM

Hello zilvian's,

I'm having a lot of trouble finding out what size brake lines and fittings are right for z32 calipers. I have a dual z32 caliper set up and a PBM hydro brake with a wilwood MC and reservoir. The MC had a single 1/8 NPT fitting. Does that mean I use 1/8" hard lines? I plan to T it off around where the stock ebrake cables run though to the underside of the chassis. Run more hard line to the rear wheel well. From there run aftermarket SS rear lines to the calipers. Can anybody help me out? Much appreciated!

Merry Christmas!

[email protected] · 12-16-2013, 05:40 AM

The threads are M10x1.0, the fronts have an inverted flare fitting, the rears are banjo, standard nissan hardline is 5mm (3/16")

12-16-2013, 12:34 AM	#1
slidewaysII Join Date: Sep 2012 Location: SoCal Posts: 34 Trader Rating: (3) Feedback Score: 3 reviews	Z32 brake hard line and fitting sizes????? Hello zilvian's, I'm having a lot of trouble finding out what size brake lines and fittings are right for z32 calipers. I have a dual z32 caliper set up and a PBM hydro brake with a wilwood MC and reservoir. The MC had a single 1/8 NPT fitting. Does that mean I use 1/8" hard lines? I plan to T it off around where the stock ebrake cables run though to the underside of the chassis. Run more hard line to the rear wheel well. From there run aftermarket SS rear lines to the calipers. Can anybody help me out? Much appreciated! Merry Christmas!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-16-2013, 05:40 AM	#2
[email protected] Leaky Injector Join Date: Sep 2012 Location: Toronto Posts: 126 Trader Rating: (0) Feedback Score: 0 reviews	The threads are M10x1.0, the fronts have an inverted flare fitting, the rears are banjo, standard nissan hardline is 5mm (3/16")