Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 10-16-2017, 09:08 PM   #1
Ccroak
 
Join Date: Mar 2012
Location: Long Island
Age: 27
Posts: 8
Trader Rating: (0)
Ccroak is an unknown quantity at this point
Feedback Score: 0 reviews
Exclamation S15 sr20de in s13 wiring issue!

Yeah I know, buy a wiring specialties harness it will save me a headache. I'm weeks deep into this now so I feel like I need to tackle this.

1999 SR20DE w/ 5spd into 89 auto s13 shell that i had a manual dual cam in previously.

I have followed a few diagrams and writeups to complete this swap. The running of a few wires to the dash plug, and to the grey and red plugs up front behind passenger side headlight.

My issue is that my ECU is not making my pin 4 black/red to go ground to complete and click the ECM relay.

This is the s15 power supply diagram. You can see pin 4 going to 2 on the relay. with positive power on one side and the ground trigger from the ecu it pulls the other two closed and completes the circuits. Without the switched ground from the ECU the positive from pin 1 on the relay flows through freely.



These are all my voltage readings I took on every single ECU pin whilst everything connected and plugged in, along with the wires I have spliced in and to what.



Also here's an s15 sr ecu pinout for a little more understanding.


I have done a lot of forum hopping so pls don't say use the search bar my problem is differing from others'.

My question is what is making my ECU think that is should not switch pin 4 to ground power?

I have jumped the black/red pin 2 on the relay straight to ground and it clicks the relay and my car will start and run. I'd like to avoid running a switch to that which is why I'm trying to evaluate why it won't do it on it's own like it's supposed to.

Also yes my relay is good, it's brand new and I tested it

Last edited by Ccroak; 10-16-2017 at 09:09 PM.. Reason: more info
Ccroak is offline   Reply With Quote
Sponsored Links
Old 01-29-2018, 11:36 PM   #2
saintjimmy333
Leaky Injector
 
saintjimmy333's Avatar
 
Join Date: Jul 2011
Location: California
Posts: 85
Trader Rating: (3)
saintjimmy333 is an unknown quantity at this point
Feedback Score: 3 reviews
Off topic, but does s15 sr20de tranny have a speed sensor? If not how’d you get the speedo to work


Sent from my iPhone using Tapatalk
saintjimmy333 is offline   Reply With Quote
Old 01-30-2018, 06:35 AM   #3
Krusty_s13
Zilvia Addict
 
Krusty_s13's Avatar
 
Join Date: May 2008
Location: Miami, FL
Posts: 862
Trader Rating: (0)
Krusty_s13 is just really niceKrusty_s13 is just really niceKrusty_s13 is just really niceKrusty_s13 is just really niceKrusty_s13 is just really niceKrusty_s13 is just really niceKrusty_s13 is just really niceKrusty_s13 is just really niceKrusty_s13 is just really niceKrusty_s13 is just really nice
Feedback Score: 0 reviews
Quote:
Originally Posted by saintjimmy333 View Post
Off topic, but does s15 sr20de tranny have a speed sensor? If not how’d you get the speedo to work


Sent from my iPhone using Tapatalk
5spd has a sensor on the trans.


Dumb question, but have you opened up the ECM and checked the condition of the board and the traces leading to that pin?
__________________
Krusty_s13 is offline   Reply With Quote
Reply

Bookmarks

Tags
s13, s15, sr20de, wiring


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:32 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™