Enkie RPF1 and 50mm/30mm/ or pull stock quarter pan???? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

s142jzkillav10 · 04-07-2009, 05:55 PM

I'm thinking about purchaseing Enkie RPF1's for my silver 97. I was wondering if any of you where running these and what is your offset and size.

I'm looking for 17's since I can fit a taller tire in the rear. but also wanted to go wide. 10" wide + for the rear. and 8.5 or 9 for the front.

I'm also contemplating about purchaseing 50mm wide quarter panels for the car. I like the wider look.
Your input if greatly appreciated Fellas/ Galls

50mm

30mm

or
Pull Stock quarter panels

HungryHank · 04-07-2009, 06:01 PM

pull unless you have qp damage

30mm is all youll need

50 is redunkulous for just 10's

txrxs · 04-07-2009, 07:11 PM

You can get away with any rpf1 size on stock fenders:

This is my car with 17x9 +22 with 50mm spacers and 215/45/17 DZ101's on the rear with a massive roll and pull.

I also ran the same wheels on an s13 with no issue with no roll or pull. You will be fine depending on tire size and even with 10" wide and 255 you should just need a good roll and a lil camber to be usable.

*brndck* · 04-08-2009, 01:59 AM

I'm running 17x10 +18 on all 4 corners on my s13. Roll and very minor pull with -5 degrees in the rear and -4 in the front. With a bigger pull (still not a major pull) you could run less aggressive camber. A lot of S-chassis fans are retarded when it comes to wide rear wheels. Unless u r running bigger than 10j with less than 10et you can get away with a roll/pull and yes I still see ppl with 9j and +20 or more with overfenders. Unnecessary.

GSXRJJordan · 04-08-2009, 02:35 AM

I agree that too many people go wide when they don't need to.

I say get 10" +18 and do a heat gun/baseball bat (or fender roller if you've got one, and the time) pull.

s142jzkillav10 · 04-08-2009, 05:24 PM

Thanks for the Input Fellas

I would like to go 10 or wider in the rear with a beefy tire. No less then 295" wide tire. b/c I would like to protect the wheel some with the tire.

I personaly don't like streatched tires

Here is what the

car currently looks like

s142jzkillav10 · 04-08-2009, 05:25 PM

ranger2339 · 04-08-2009, 07:17 PM

[QUOTE]

Ha!

cc4usmc · 04-08-2009, 11:10 PM

Where's the poll?

And why are you working on your car at a restaurant?

Enna · 04-08-2009, 11:20 PM

At a mexican restaurant at that...

**Phlip** · 04-09-2009, 01:02 PM

Quote:

Originally Posted by cc4usmc

Where's the poll?

No poll

04-07-2009, 05:55 PM	#1
s142jzkillav10 Zilvia Junkie Join Date: Mar 2009 Location: Kill Devil Hills, NC aka OBX Posts: 309 Trader Rating: (5) Feedback Score: 5 reviews	Enkie RPF1 and 50mm/30mm/ or pull stock quarter pan???? I'm thinking about purchaseing Enkie RPF1's for my silver 97. I was wondering if any of you where running these and what is your offset and size. I'm looking for 17's since I can fit a taller tire in the rear. but also wanted to go wide. 10" wide + for the rear. and 8.5 or 9 for the front. I'm also contemplating about purchaseing 50mm wide quarter panels for the car. I like the wider look. Your input if greatly appreciated Fellas/ Galls 50mm 30mm or Pull Stock quarter panels

04-07-2009, 07:11 PM	#3
txrxs Zilvia Junkie Join Date: Sep 2005 Location: Indy Posts: 549 Trader Rating: (8) Feedback Score: 8 reviews	You can get away with any rpf1 size on stock fenders: This is my car with 17x9 +22 with 50mm spacers and 215/45/17 DZ101's on the rear with a massive roll and pull. I also ran the same wheels on an s13 with no issue with no roll or pull. You will be fine depending on tire size and even with 10" wide and 255 you should just need a good roll and a lil camber to be usable. __________________ DRIFTINDY

04-08-2009, 02:35 AM	#5
GSXRJJordan Post Whore! Join Date: May 2006 Location: << 626 >> Posts: 9,135 Trader Rating: (19) Rides Gallery: GSXRJJordan Feedback Score: 19 reviews	I agree that too many people go wide when they don't need to. I say get 10" +18 and do a heat gun/baseball bat (or fender roller if you've got one, and the time) pull. __________________ Jordan Innovations has a new web site! www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-07-2009, 06:01 PM	#2
HungryHank BANNED Join Date: Feb 2009 Location: 123klan - Southern California Baby Killer Gang Posts: 708 Trader Rating: (12) Feedback Score: 12 reviews	pull unless you have qp damage 30mm is all youll need 50 is redunkulous for just 10's

04-08-2009, 05:24 PM	#6
s142jzkillav10 Zilvia Junkie Join Date: Mar 2009 Location: Kill Devil Hills, NC aka OBX Posts: 309 Trader Rating: (5) Feedback Score: 5 reviews	Thanks for the Input Fellas I would like to go 10 or wider in the rear with a beefy tire. No less then 295" wide tire. b/c I would like to protect the wheel some with the tire. I personaly don't like streatched tires Here is what the car currently looks like

04-08-2009, 05:25 PM	#7
s142jzkillav10 Zilvia Junkie Join Date: Mar 2009 Location: Kill Devil Hills, NC aka OBX Posts: 309 Trader Rating: (5) Feedback Score: 5 reviews

04-08-2009, 07:17 PM	#8
ranger2339 Zilvia Junkie Join Date: May 2006 Location: MINNESOTA Age: 40 Posts: 520 Trader Rating: (1) Feedback Score: 1 reviews	[QUOTE] Ha!