Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Z Chassis

Z Chassis Technical discussion related to the Z Chassis such as the S30, S310, Z31, Z32, Z33 and Z34.


Reply
 
Thread Tools Display Modes
Old 12-31-2008, 10:39 PM   #1
alzahakar
Zilvia Member
 
alzahakar's Avatar
 
Join Date: Aug 2008
Location: San Antonio, TX
Age: 39
Posts: 196
Trader Rating: (4)
alzahakar has a little shameless behavior in the past
Feedback Score: 4 reviews
Smoking exhaust

Ok, my friend has a 86 Z31 turbo. He recently had the motor replaced after the old motor developed a rod knock. He looked into rebuilding the stock motor, but decided to just have it replaced with a low mileage JDM VG30ET as it ended up being about two grand cheaper than any rebuild he was quoted. After the swap, the exhaust smoked at startup, but quickly went away as the car was driven and warmed up. The shop ensured him it was just from the motor sitting in the shipping container and would go away with some miles. He's driven the car in excess of 150 miles since and has had the oil changed. The car has a new cat and a new exhaust. When I watched the car warm up, I noticed alot of condensation coming out of the tailpipe with the A/C off. I'm thinking the motor has a bad head gasket and it's leaking coolant into one of the cylinders, but I would like a confirmation before we go tearing the heads off the thing. Here's the video, lemme know what you guys think.

YouTube - 300zx smoking problems

**edit**
BTW, the engine runs strong, doesn't stumble or idle bad.

Last edited by alzahakar; 12-31-2008 at 10:45 PM.. Reason: more info
alzahakar is offline   Reply With Quote
Sponsored Links
Old 12-31-2008, 10:57 PM   #2
S14DB
AFC #1
 
S14DB's Avatar
 
Join Date: Oct 2003
Location: 昨晩あなたのお母さんの家
Posts: 20,181
Trader Rating: (3)
S14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfection
Feedback Score: 3 reviews
You do a compression and leak down test? What year is the motor(pre 88)?
__________________
Comments should be taken as Opinions not as Statements of Fact
S14DB is offline   Reply With Quote
Old 12-31-2008, 11:02 PM   #3
alzahakar
Zilvia Member
 
alzahakar's Avatar
 
Join Date: Aug 2008
Location: San Antonio, TX
Age: 39
Posts: 196
Trader Rating: (4)
alzahakar has a little shameless behavior in the past
Feedback Score: 4 reviews
Not too sure on the motor year. Know how to find out? The shop told him the compression and leakdown were good. Motor supposedly has 32k miles. It drives better than the old motor. It makes boost at like 1700rpm. It's sick.
alzahakar is offline   Reply With Quote
Old 12-31-2008, 11:09 PM   #4
S14DB
AFC #1
 
S14DB's Avatar
 
Join Date: Oct 2003
Location: 昨晩あなたのお母さんの家
Posts: 20,181
Trader Rating: (3)
S14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfection
Feedback Score: 3 reviews
I wouldn't believe the shop if it's doing that. Get it tested.

Does it have a T3 or T25?
__________________
Comments should be taken as Opinions not as Statements of Fact
S14DB is offline   Reply With Quote
Old 01-01-2009, 12:25 AM   #5
alzahakar
Zilvia Member
 
alzahakar's Avatar
 
Join Date: Aug 2008
Location: San Antonio, TX
Age: 39
Posts: 196
Trader Rating: (4)
alzahakar has a little shameless behavior in the past
Feedback Score: 4 reviews
Not too sure. I haven't been under the hood much. I've almost completely rewired it, but nothing mechanically. I'll have to go over to his place tomorrow and take some good underhood pics.
alzahakar is offline   Reply With Quote
Old 01-01-2009, 12:42 AM   #6
S14DB
AFC #1
 
S14DB's Avatar
 
Join Date: Oct 2003
Location: 昨晩あなたのお母さんの家
Posts: 20,181
Trader Rating: (3)
S14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfection
Feedback Score: 3 reviews
It only does it when the car is warmed up or all the time?
__________________
Comments should be taken as Opinions not as Statements of Fact
S14DB is offline   Reply With Quote
Old 01-01-2009, 12:54 AM   #7
alzahakar
Zilvia Member
 
alzahakar's Avatar
 
Join Date: Aug 2008
Location: San Antonio, TX
Age: 39
Posts: 196
Trader Rating: (4)
alzahakar has a little shameless behavior in the past
Feedback Score: 4 reviews
Does it from cold start up til shortly after it's warm. It does seem to take longer for it to stop smoking if you let the car sit and idle than it does if you take a short drive or rev the engine up.
alzahakar is offline   Reply With Quote
Old 01-02-2009, 01:53 AM   #8
alzahakar
Zilvia Member
 
alzahakar's Avatar
 
Join Date: Aug 2008
Location: San Antonio, TX
Age: 39
Posts: 196
Trader Rating: (4)
alzahakar has a little shameless behavior in the past
Feedback Score: 4 reviews
I ordered a LDT setup. I needed it anyway. As soon as I got this car over to my place, I started checking it out. It is a 86 motor(written across the tensioner bracket in white paint marker) and indeed has a T3 turbo. Taking it to a friend's shop to get the leak down done tomorrow since my setup won't be in a for a couple of days.
alzahakar is offline   Reply With Quote
Old 01-03-2009, 03:36 PM   #9
alzahakar
Zilvia Member
 
alzahakar's Avatar
 
Join Date: Aug 2008
Location: San Antonio, TX
Age: 39
Posts: 196
Trader Rating: (4)
alzahakar has a little shameless behavior in the past
Feedback Score: 4 reviews
Did the compression test. Numbers ranged from 119-138. Tested twice. I found some compression numbers on hybridz or z32.org that said they should be around 170-180 on a fresh rebuild and 150-160 on an aged engine.
alzahakar is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:53 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™