Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Chat

Chat General Discussion About The Nissan 240SX and Nissan Z Cars


Closed Thread
 
Thread Tools Display Modes
Old 05-07-2004, 02:28 PM   #91
S14DriftR
Zilvia Addict
 
S14DriftR's Avatar
 
Join Date: Feb 2003
Location: Oxnard
Age: 37
Posts: 604
Trader Rating: (1)
S14DriftR is an unknown quantity at this point
Feedback Score: 1 reviews
Send a message via AIM to S14DriftR
Volk superfine mesh
16x7.5+22 with 205/55/16 clears coilovers but not 26mm Z brakes. requires camber and rolled fenders when going low, front tire is tucked about 1/2" and rears about 1/4", pic is shown at recommend height on he's


also using a pair of 5zigen typhoons 17x8+35 with 245/40's in rear sometimes, clear coilovers and doesnt rub at same suspension settings. No pics yet
__________________
S14DriftR is offline  
Sponsored Links
Old 05-07-2004, 02:33 PM   #92
boro240
Zilvia FREAK!
 
Join Date: Jan 2003
Location: Tucson, AZ
Age: 36
Posts: 1,324
Trader Rating: (0)
boro240 is making a name for him/her selfboro240 is making a name for him/her self
Feedback Score: 0 reviews
right now i have 15x6.5 +19 Volk Mesh.

as soon as possible they will be 15x7.5 +6, or maybe 15x8 +0.
boro240 is offline  
Old 05-07-2004, 02:36 PM   #93
Bliss
Zilvia Addict
 
Join Date: Mar 2003
Location: San Diego/Bay Area
Age: 36
Posts: 686
Trader Rating: (0)
Bliss is an unknown quantity at this point
Feedback Score: 0 reviews
Send a message via ICQ to Bliss Send a message via AIM to Bliss
Quote:
Originally Posted by nokeone
yeah 275/45's sure...but not 20 series...lol

i was thinking it was made up or typo...
i dont know of any company that makes a 275/20/ANYTHING, let alone a 17. If anything, itd be a 275/20/20 or something. I HAVE seen 25 series tho. I cant believe sidewalls are getting that small.
__________________
-Ben
Bliss is offline  
Old 06-30-2004, 12:30 PM   #94
tastyratz
Zilvia Addict
 
tastyratz's Avatar
 
Join Date: Dec 2003
Location: nh
Posts: 995
Trader Rating: (4)
tastyratz is a splendid one to beholdtastyratz is a splendid one to beholdtastyratz is a splendid one to beholdtastyratz is a splendid one to beholdtastyratz is a splendid one to beholdtastyratz is a splendid one to beholdtastyratz is a splendid one to beholdtastyratz is a splendid one to beholdtastyratz is a splendid one to beholdtastyratz is a splendid one to beholdtastyratz is a splendid one to behold
Feedback Score: 4 reviews
Send a message via AIM to tastyratz
Lets keep this thing alive, bump for a good thread. lets try to make this alot easier to read though lets develop some sort of format to posting your sizes

car? (ex s13)
full wheel size + offset (ex 17x9 +20 all around)
Tire size (ex. 235-45-17)
fitment modifications (ex widebody rears, rolled/pulled fenders, etc.)
Coilover / brake clearance (what kind of coilovers do you have and what brakes are you running?)

( i used my plans for when i buy my wheels he he)

Could a mod clean up this thread a little bit? This is awesome information and its great to have around to help cut down will this fit threads. keep em comin guys!
tastyratz is offline  
Old 06-30-2004, 11:12 PM   #95
sil40sx
BANNED
 
Join Date: Jul 2001
Location: modesto
Posts: 322
Trader Rating: (0)
sil40sx is an unknown quantity at this point
Feedback Score: 0 reviews
i have the 240sx limited edition wheels. fnoir-c 17x9+15 17x10 +25
sil40sx is offline  
Old 07-01-2004, 09:19 AM   #96
brianglawson
Nissanaholic!
 
brianglawson's Avatar
 
Join Date: May 2003
Location: Virginia Tech, Blacksburg, VA
Age: 33
Posts: 1,912
Trader Rating: (1)
brianglawson is an unknown quantity at this point
Feedback Score: 1 reviews
Send a message via ICQ to brianglawson Send a message via AIM to brianglawson Send a message via Yahoo to brianglawson
nice car sil40zx, im in agreement with tastyrats, that we should sticky this thread, good info in it
__________________
S15 SR20DET Powered, Kouki S14 http://zilvia.net/f/showthread.php?t=578575
brianglawson is offline  
Old 07-01-2004, 05:14 PM   #97
mellojoe
Zilvia Junkie
 
Join Date: Jan 2004
Location: ARKANSAS
Posts: 518
Trader Rating: (0)
mellojoe is an unknown quantity at this point
Feedback Score: 0 reviews
stock wheels
Eibach ProKits + KYB AGX
Infiniti Q45 brakes (2-piston caliper, 11" rotors)

fitment is perfect. No problems. need bigger wheels.
__________________
mellojoe is offline  
Old 07-01-2004, 05:29 PM   #98
nocomedown
Zilvia FREAK!
 
nocomedown's Avatar
 
Join Date: Dec 2002
Location: West Lafayette, IN / TX
Age: 35
Posts: 1,359
Trader Rating: (0)
nocomedown has a little shameless behavior in the past
Feedback Score: 0 reviews
Send a message via AIM to nocomedown
Heroes Racing Mesh (don't see too many of these around)
15X6.5 +16 all around (yeah i know weak size, but at least it's a good offset)


yeah yeah, i know, wheel gap blah blah blah. if someone wants to donate some money to my new struts and springs/coilover fund, then i'll get it fixed.
nocomedown is offline  
Old 07-06-2004, 03:00 AM   #99
b18c1ek
Leaky Injector
 
Join Date: Dec 2001
Location: SoCal
Posts: 146
Trader Rating: (1)
b18c1ek is an unknown quantity at this point
Feedback Score: 1 reviews
I'm about to order a set of 15x7.5 wheels with -5 offset for my S13. I'm contemplating either a 195/60 or 205/55 tire. I don't wish to pull or roll the fenders, I don't have Z brakes, but I do have Silkroad coilovers with front camber plates... can someone tell me whether this combination will fit my stock bodied S13 with the tire sizes listed above? Does anyone have any pics with a similar sized wheel on their S13?

BTW, currently running 17x8 Fr +38 (plus 5mm spacer, effective offset is +33), 215/45 and 17x9 Rr +38, 245/40 SSR Varden Sport wheels, with no fitment issues. Pics are in the link on my sig. These wheels will be for sale soon.

Thanks
__________________
1993 240SX SE coupe

Last edited by b18c1ek; 07-06-2004 at 03:21 AM..
b18c1ek is offline  
Old 07-06-2004, 03:51 AM   #100
Flybert
Post Whore!
 
Join Date: Mar 2003
Location: none
Posts: 3,862
Trader Rating: (7)
Flybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfection
Feedback Score: 7 reviews
Quote:
Originally Posted by b18c1ek
I'm about to order a set of 15x7.5 wheels with -5 offset for my S13. I'm contemplating either a 195/60 or 205/55 tire. I don't wish to pull or roll the fenders, I don't have Z brakes, but I do have Silkroad coilovers with front camber plates... can someone tell me whether this combination will fit my stock bodied S13 with the tire sizes listed above? Does anyone have any pics with a similar sized wheel on their S13?

BTW, currently running 17x8 Fr +38 (plus 5mm spacer, effective offset is +33), 215/45 and 17x9 Rr +38, 245/40 SSR Varden Sport wheels, with no fitment issues. Pics are in the link on my sig. These wheels will be for sale soon.

Thanks
If you aren't planning on rolling your fenders, don't even think about it. Why don't you want to roll them? What's the big deal? I would suggest pulling the rear as well. Sam from JSPEC let me borrow some wheels for the drift comp last weekend. They were southern ways mesh at 15x7.5 +4 with 195/55 and they stuck out beyond the fender. I hammered the lip of the fender in and was running -1.75 degrees camber and they worked without rubbing. Your are going to stick out another 9mm and be sporting wider tires. You are screwed unless you want to run more than -4 degrees camber. Or you could always go mexicali style rubbing the whole way. Might wanna run a wheel spacer to get them beyond the fender. AHAHA
Flybert is offline  
Old 07-06-2004, 08:32 AM   #101
KasperSlide
Zilvia Member
 
Join Date: Feb 2004
Location: North carolina
Posts: 165
Trader Rating: (0)
KasperSlide has made poor choicesKasperSlide has made poor choicesKasperSlide has made poor choicesKasperSlide has made poor choicesKasperSlide has made poor choicesKasperSlide has made poor choices
Feedback Score: 0 reviews
so if you want a lip on the wheels you need a positive off set.
kind of a stupid Q
KasperSlide is offline  
Old 07-06-2004, 09:26 AM   #102
TheTimanator
Post Whore!
 
TheTimanator's Avatar
 
Join Date: Apr 2002
Location: Nashville
Age: 38
Posts: 2,535
Trader Rating: (1)
TheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond repute
Feedback Score: 1 reviews
Quote:
Originally Posted by KasperSlide
so if you want a lip on the wheels you need a positive off set.
kind of a stupid Q
the lower the offset the larger the the lip will be.
7" wide +40 offset = no lip
7" wide 0 offset = 2" inch or so
7" wide -20 offset = big lip but requires wide fenders.

Also, it depends on the design of the rim.
__________________
89 S13 hatch/////98 Subaru 2.5RS
TheTimanator is offline  
Old 07-06-2004, 12:07 PM   #103
b18c1ek
Leaky Injector
 
Join Date: Dec 2001
Location: SoCal
Posts: 146
Trader Rating: (1)
b18c1ek is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by Flybert
If you aren't planning on rolling your fenders, don't even think about it. Why don't you want to roll them? What's the big deal? I would suggest pulling the rear as well. Sam from JSPEC let me borrow some wheels for the drift comp last weekend. They were southern ways mesh at 15x7.5 +4 with 195/55 and they stuck out beyond the fender. I hammered the lip of the fender in and was running -1.75 degrees camber and they worked without rubbing. Your are going to stick out another 9mm and be sporting wider tires. You are screwed unless you want to run more than -4 degrees camber. Or you could always go mexicali style rubbing the whole way. Might wanna run a wheel spacer to get them beyond the fender. AHAHA
I didn't want to roll or pull the fenders because if it's not done right, it would look horrible, and if I decide to run normal wheels later on, the pulled fenders would look awkward. I don't mind running camber as long as it's not over exaggerated, besides how functional is -4 degrees camber for daily driving? also, I found the same wheels in 15x7 with a +32 offset. If I run the 205/55 tires on these rims, how tucked would they be? Thanks for the input.
__________________
1993 240SX SE coupe
b18c1ek is offline  
Old 07-06-2004, 12:12 PM   #104
Tuned240
Leaky Injector
 
Tuned240's Avatar
 
Join Date: Mar 2004
Location: Florence, KY
Age: 42
Posts: 128
Trader Rating: (0)
Tuned240 is an unknown quantity at this point
Feedback Score: 0 reviews
Send a message via AIM to Tuned240
stockers in gunmetal spray paint.
__________________
1995 240sx SE Almost stock

Tuned240 is offline  
Old 07-06-2004, 04:55 PM   #105
Flybert
Post Whore!
 
Join Date: Mar 2003
Location: none
Posts: 3,862
Trader Rating: (7)
Flybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfection
Feedback Score: 7 reviews
Quote:
Originally Posted by b18c1ek
I didn't want to roll or pull the fenders because if it's not done right, it would look horrible, and if I decide to run normal wheels later on, the pulled fenders would look awkward. I don't mind running camber as long as it's not over exaggerated, besides how functional is -4 degrees camber for daily driving? also, I found the same wheels in 15x7 with a +32 offset. If I run the 205/55 tires on these rims, how tucked would they be? Thanks for the input.
-4 degrees camber is HORRIBLE for daily driving and for track driving. I think a few 86 guys run that much up front but those cars are pure track drift whores. Also, rolling your fenders doesn't change the look of your car at all. I did it with a hammer on a hot day. Just bash that lip flat and enjoy having 10mm more clearance. Preferably, you don't want to run as much camber in the back as the front so pulling would be a plus if you ran such a low offset.

As for the 15x7 +32, flushness will depend on how much camber you are running. Even on stock camber they will be sunken in so don't be expecting flushness if you get them. http://toy4two.home.mindspring.com/offset.html Use this website and do all your measurements on your own. Find pics of people's cars and find out their alignment and wheel specs. This will help you out a lot.
Flybert is offline  
Old 07-07-2004, 01:11 AM   #106
b18c1ek
Leaky Injector
 
Join Date: Dec 2001
Location: SoCal
Posts: 146
Trader Rating: (1)
b18c1ek is an unknown quantity at this point
Feedback Score: 1 reviews
Thanks Flybert... gonna consider rolling the fender lip then... does anyone have a pic of a 15x7.5 (-5 offset) wheel on a stock bodied S13?
__________________
1993 240SX SE coupe
b18c1ek is offline  
Old 07-07-2004, 01:29 AM   #107
TheSnail
Nissanaholic!
 
TheSnail's Avatar
 
Join Date: Jan 2004
Location: Marietta Georgia
Age: 39
Posts: 2,434
Trader Rating: (0)
TheSnail is a name known to allTheSnail is a name known to allTheSnail is a name known to allTheSnail is a name known to allTheSnail is a name known to allTheSnail is a name known to allTheSnail is a name known to allTheSnail is a name known to allTheSnail is a name known to allTheSnail is a name known to allTheSnail is a name known to all
Feedback Score: 0 reviews
Manaray Sport mesh
17x8.5 in front
17x9.5 in back

offset of 33+, with a 3.5 inch lip

They will arrive thursday, cant wait.
Attached Images
File Type: jpg Manaray.jpg (22.6 KB, 156 views)
TheSnail is offline  
Old 07-07-2004, 01:30 AM   #108
S14DriftR
Zilvia Addict
 
S14DriftR's Avatar
 
Join Date: Feb 2003
Location: Oxnard
Age: 37
Posts: 604
Trader Rating: (1)
S14DriftR is an unknown quantity at this point
Feedback Score: 1 reviews
Send a message via AIM to S14DriftR
these are 15x7-3, your definatly going to need pulled fenders to fit in rear, should be fine in the front with rolled fenders and some camber.
__________________
S14DriftR is offline  
Old 07-07-2004, 02:08 AM   #109
b18c1ek
Leaky Injector
 
Join Date: Dec 2001
Location: SoCal
Posts: 146
Trader Rating: (1)
b18c1ek is an unknown quantity at this point
Feedback Score: 1 reviews
excellent pic S14DriftR... do you have a pic of 15x7 with +32 or similar? also what size tires were u running in the pic? thats a nasty set up!
__________________
1993 240SX SE coupe
b18c1ek is offline  
Old 07-07-2004, 07:48 AM   #110
S14DriftR
Zilvia Addict
 
S14DriftR's Avatar
 
Join Date: Feb 2003
Location: Oxnard
Age: 37
Posts: 604
Trader Rating: (1)
S14DriftR is an unknown quantity at this point
Feedback Score: 1 reviews
Send a message via AIM to S14DriftR
those tires were 205/55/15 in the rear, was using 195/55/15's front. no pics of 15x7+32, closest i have to that is 16x7.5+22 and there is a pic at the top of this page.
__________________
S14DriftR is offline  
Old 07-07-2004, 08:28 AM   #111
TheTimanator
Post Whore!
 
TheTimanator's Avatar
 
Join Date: Apr 2002
Location: Nashville
Age: 38
Posts: 2,535
Trader Rating: (1)
TheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond repute
Feedback Score: 1 reviews
Quote:
Originally Posted by TheSnail
Manaray Sport mesh
17x8.5 in front
17x9.5 in back

offset of 33+, with a 3.5 inch lip

They will arrive thursday, cant wait.
takara garage? how was dealing with them?
they're a local company and like to get a few things through them...
__________________
89 S13 hatch/////98 Subaru 2.5RS
TheTimanator is offline  
Old 07-07-2004, 08:47 AM   #112
kcolyer27
BANNED
 
kcolyer27's Avatar
 
Join Date: Jan 2004
Location: cleveland
Posts: 586
Trader Rating: (0)
kcolyer27 is an unknown quantity at this point
Feedback Score: 0 reviews
18x9 in the rear 18x8.5 in the front

kcolyer27 is offline  
Old 07-07-2004, 09:00 AM   #113
TheTimanator
Post Whore!
 
TheTimanator's Avatar
 
Join Date: Apr 2002
Location: Nashville
Age: 38
Posts: 2,535
Trader Rating: (1)
TheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond reputeTheTimanator has a reputation beyond repute
Feedback Score: 1 reviews
Quote:
Originally Posted by kcolyer27
18x9 in the rear 18x8.5 in the front
must include offset and tire size!!! otherwise this thread is useless..
and whether you rolled/pulled fenders, clears Z brakes and coilovers would be nice too
__________________
89 S13 hatch/////98 Subaru 2.5RS
TheTimanator is offline  
Old 07-07-2004, 09:17 AM   #114
brianglawson
Nissanaholic!
 
brianglawson's Avatar
 
Join Date: May 2003
Location: Virginia Tech, Blacksburg, VA
Age: 33
Posts: 1,912
Trader Rating: (1)
brianglawson is an unknown quantity at this point
Feedback Score: 1 reviews
Send a message via ICQ to brianglawson Send a message via AIM to brianglawson Send a message via Yahoo to brianglawson
^^^^^ damn skippy, but the wheels are the hotness
__________________
S15 SR20DET Powered, Kouki S14 http://zilvia.net/f/showthread.php?t=578575
brianglawson is offline  
Old 07-07-2004, 09:29 AM   #115
KiDyNomiTe
Post Whore!
 
KiDyNomiTe's Avatar
 
Join Date: Mar 2002
Location: Chicago
Age: 35
Posts: 6,296
Trader Rating: (0)
KiDyNomiTe has a reputation beyond reputeKiDyNomiTe has a reputation beyond reputeKiDyNomiTe has a reputation beyond reputeKiDyNomiTe has a reputation beyond reputeKiDyNomiTe has a reputation beyond reputeKiDyNomiTe has a reputation beyond reputeKiDyNomiTe has a reputation beyond reputeKiDyNomiTe has a reputation beyond reputeKiDyNomiTe has a reputation beyond reputeKiDyNomiTe has a reputation beyond reputeKiDyNomiTe has a reputation beyond repute
Feedback Score: 0 reviews
Send a message via AIM to KiDyNomiTe
14x6 +156 enkei mesh
15x7 +2 Riken Mesh
15x7.5 +7 SSR Formula Mesh

All are pictured in here. Only 1 enkei in the pic, and only 2 rikens in the pic.
__________________
PROCEED
Grip Gambler
KiDyNomiTe is offline  
Old 07-07-2004, 12:51 PM   #116
AceInHole
Autox Technician
 
AceInHole's Avatar
 
Join Date: Dec 2001
Location: New Haven, CT
Age: 40
Posts: 3,961
Trader Rating: (0)
AceInHole is close to perfectionAceInHole is close to perfectionAceInHole is close to perfectionAceInHole is close to perfectionAceInHole is close to perfectionAceInHole is close to perfectionAceInHole is close to perfectionAceInHole is close to perfectionAceInHole is close to perfectionAceInHole is close to perfectionAceInHole is close to perfection
Feedback Score: 0 reviews
Front:
17x8 +11 with 225/45/R17
Rear:
17x10.5 +27 with 315/35/R17


Front:
17x10.5 +0 with 315/35/R17 (any more offset hits coilover)
__________________
AceInHole is offline  
Old 07-07-2004, 01:39 PM   #117
TheSnail
Nissanaholic!
 
TheSnail's Avatar
 
Join Date: Jan 2004
Location: Marietta Georgia
Age: 39
Posts: 2,434
Trader Rating: (0)
TheSnail is a name known to allTheSnail is a name known to allTheSnail is a name known to allTheSnail is a name known to allTheSnail is a name known to allTheSnail is a name known to allTheSnail is a name known to allTheSnail is a name known to allTheSnail is a name known to allTheSnail is a name known to allTheSnail is a name known to all
Feedback Score: 0 reviews
Quote:
Originally Posted by TheTimanator
takara garage? how was dealing with them?
they're a local company and like to get a few things through them...

They were not that bad to deal with so far. The only thing I heard about them, is if you order something it will take forever to arrive, but they sent me the tracking # already and it should be here in 3 days, so I will see. I hope they are half decent shape since I paided the 963 for the used rims. Im dont car about scratches, but I would hate to repair a bent rim. I will make a post when they arrive.
-Thanks, Snail
TheSnail is offline  
Old 07-07-2004, 02:38 PM   #118
GonadSX
Leaky Injector
 
Join Date: Jun 2003
Location: Ontario
Posts: 131
Trader Rating: (0)
GonadSX is an unknown quantity at this point
Feedback Score: 0 reviews
16x7 +35, 16x8 +38, 4x100 bolt pattern.
The wheels come with a 10mm adapter/spacer to convert 4x100 to 4x114.3 (shown in last pic)

Click pics to enlarge:


More pics and stuff on my site:
http://240sx.cubicdesign.com/
__________________
Gautam :: Google Specialist :: www.my240.com
GonadSX is offline  
Old 07-20-2004, 12:49 AM   #119
RiceEata
Zilvia Member
 
Join Date: Jan 2003
Location: 808
Age: 41
Posts: 226
Trader Rating: (0)
RiceEata is a splendid one to beholdRiceEata is a splendid one to beholdRiceEata is a splendid one to beholdRiceEata is a splendid one to beholdRiceEata is a splendid one to beholdRiceEata is a splendid one to beholdRiceEata is a splendid one to beholdRiceEata is a splendid one to beholdRiceEata is a splendid one to beholdRiceEata is a splendid one to beholdRiceEata is a splendid one to behold
Feedback Score: 0 reviews
Roja formula 5's
F: 18x8 +23 225/40/18 = Apex N1 pro camber plates maxed out as much as it can go, need to roll fenders and 215/40 would be better.

R: 18x9 +23 225/40/18 = too much camber, need to roll and maybe pull fenders

Pix are with out rolled fenders....



RiceEata is offline  
Old 07-20-2004, 12:58 AM   #120
S14DriftR
Zilvia Addict
 
S14DriftR's Avatar
 
Join Date: Feb 2003
Location: Oxnard
Age: 37
Posts: 604
Trader Rating: (1)
S14DriftR is an unknown quantity at this point
Feedback Score: 1 reviews
Send a message via AIM to S14DriftR
holy crap, that will look awesome once you roll and pull the fenders a little in back, fronts look like they fit perfect, that rear camber is insane though.
__________________
S14DriftR is offline  
Closed Thread

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:44 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™