a/c condenser - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

crazyman69 · 06-18-2009, 02:22 PM

so i am wanting to take my a/c out on my ka24de and the belt goes to the a/c condensor to the crank then to a idler pully do i still have to have a belt on the idler pully to the crank?

projectRDM · 06-18-2009, 07:20 PM

If you have a belt on your A/C condensor, you have a serious problem.

There is a belt on the compressor though. And common sense would tell you if you remove the compressor, you can remove the tensioner pulley, bracket, and belt as well. But that would be way too easy to figure out it seems.

crazyman69 · 06-18-2009, 11:06 PM

ok yea its the compressor but wat would i have to do with the idler pulley?

projectRDM · 06-19-2009, 08:27 AM

Quote:

Originally Posted by crazyman69

ok yea its the compressor but wat would i have to do with the idler pulley?

Reading shouldn't be that hard. Neither should common sense. If the compressor is removed, the belt no longer serves a purpose. Period. In that case, anything that's not directly related to the engine is also no longer needed. So as I said directly above you that you failed to understand, the pulley and compressor bracket can both be removed. They don't do anything once the compressor is gone.

06-18-2009, 02:22 PM	#1
crazyman69 Join Date: Feb 2009 Location: st.louis Posts: 15 Trader Rating: (0) Feedback Score: 0 reviews	a/c condenser so i am wanting to take my a/c out on my ka24de and the belt goes to the a/c condensor to the crank then to a idler pully do i still have to have a belt on the idler pully to the crank?

06-18-2009, 07:20 PM	#2
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 47 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	If you have a belt on your A/C condensor, you have a serious problem. There is a belt on the compressor though. And common sense would tell you if you remove the compressor, you can remove the tensioner pulley, bracket, and belt as well. But that would be way too easy to figure out it seems. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-18-2009, 11:06 PM	#3
crazyman69 Join Date: Feb 2009 Location: st.louis Posts: 15 Trader Rating: (0) Feedback Score: 0 reviews	ok yea its the compressor but wat would i have to do with the idler pulley?