Ritz S14

I hope this isn't a repost. But just trying to help those of you who would like better stopping power at a fraction of the price.

Well on my search for Z32 calipers I came across 26mm calipers for $175 shipped in the FS forum.. thinking the GB was asking $250 for 30mm.. I figure I'll go with the 26mm.. I know most of you wouldn't ever consider ebay, but I found z32 wrapped SS braided lines for $110 shipped front and rear(you can get these at the majority of zilvia.net sponsors but they aren't wrapped). The day I recieved my calipers I did some searching and found pads for 19.99+tax for the fronts from AUTOZONE which just opened down the street from my work. Then it took me a couple of hours calling parts houses for 26mm rotors, but I finally found them at NAPA for 28.99 +tax each which would arrive the next day.

So totalling the cost of calipers/rotors/brake pads/brake lines.. it came out to be about $375, just takes a bit more time and patience to pull together. But well worth if if you asked me.. The calipers I bought could have used a rebuild, but as I was examining it seemd in good enough shape to throw on, but I suggest anyone who buys a used/non rebuilt calipers to rebuild them or have them rebuilt. I already had a bottle of brake fluid laying around so if needed just add $10 or so to the price.
Here's a list to make things easier:
Calipers $175 (fs forum)
(2)Rotors~ $65 (Napa auto parts)
Brake lines $110 (Ebay/zilvia sponsors)
Pads $22 (Autozone)
Brake fluid~$10 (any parts store)
Total =$382



Rotors aren't pictured..but they're just NAPA banks..

You can always find cheaper/better parts.. But this is the route I took.. we'll see in a few days/weeks/months to see how they're holding up. Stopping power has dramatically increased by at least 30%(oh yeah no leaks yet:crosses fingers.Only bad part about this swap is that they don't clear my rims by about 10mm.. if anyone has them(spacers) let me know.. Hoped you guys liked the info.