A/C wiring for a S14 SR in a S13? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

C. Anderson · 04-30-2008, 08:43 PM

I have tried searching with no luck but I was trying to see if this is correct from what I've found in the FSMs. I have pin 25 (green/yellow) from F1 (s14 interior plug) going to green/yellow on F1 (s13 interior plug) then extended to green/yellow on F9 (s13 harness under the hood by the battery) for the relay. For the thermal control amp (AC switch) I have pin 17 (red) from F1 (s14 interior plug) to the blue/green on F1 (s13 interior plug) then extended to blue/green on F9 (s13 harness under the hood by the battery). Is this correct? I was just looking for verification from anybody that may be able to help. Thanks!

C. Anderson · 05-02-2008, 08:08 AM

Can anybody comfirm?

Z U L8R · 05-02-2008, 11:44 PM

run the blue/green stripe on your s13's dash plug behind the glove box to your green/yellow on your s13's brownish/red plug on the passenger side fender where the battery goes

Dave =]

C. Anderson · 05-03-2008, 06:48 AM

Thanks! I'll check that out.

juls213 · 05-03-2008, 07:05 AM

What kind of compressor and bracket are you using?
I have an s14 with s13redtop. Can i use the sr bracket with s14kade compressor? Guys I need AC lol

Z U L8R · 05-03-2008, 08:52 AM

juls it'd probably be the easiest thing to use the red top sr compressor and bracket and get the ends of the high and low pressure hoses fabricated. gl
Dave =]

04-30-2008, 08:43 PM	#1
C. Anderson Zilvia Addict Join Date: Mar 2005 Location: Memphis, TN Posts: 753 Trader Rating: (17) Feedback Score: 17 reviews	A/C wiring for a S14 SR in a S13? I have tried searching with no luck but I was trying to see if this is correct from what I've found in the FSMs. I have pin 25 (green/yellow) from F1 (s14 interior plug) going to green/yellow on F1 (s13 interior plug) then extended to green/yellow on F9 (s13 harness under the hood by the battery) for the relay. For the thermal control amp (AC switch) I have pin 17 (red) from F1 (s14 interior plug) to the blue/green on F1 (s13 interior plug) then extended to blue/green on F9 (s13 harness under the hood by the battery). Is this correct? I was just looking for verification from anybody that may be able to help. Thanks!

05-02-2008, 11:44 PM	#3
Z U L8R Zilvia FREAK! Join Date: Jan 2007 Location: Georgia Age: 39 Posts: 1,194 Trader Rating: (0) Feedback Score: 0 reviews	run the blue/green stripe on your s13's dash plug behind the glove box to your green/yellow on your s13's brownish/red plug on the passenger side fender where the battery goes Dave =] __________________ RB25 280z GT30/76R 441hp/381tq [email protected]

05-03-2008, 08:52 AM	#6
Z U L8R Zilvia FREAK! Join Date: Jan 2007 Location: Georgia Age: 39 Posts: 1,194 Trader Rating: (0) Feedback Score: 0 reviews	juls it'd probably be the easiest thing to use the red top sr compressor and bracket and get the ends of the high and low pressure hoses fabricated. gl Dave =] __________________ RB25 280z GT30/76R 441hp/381tq [email protected]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-02-2008, 08:08 AM	#2
C. Anderson Zilvia Addict Join Date: Mar 2005 Location: Memphis, TN Posts: 753 Trader Rating: (17) Feedback Score: 17 reviews	Can anybody comfirm?

05-03-2008, 06:48 AM	#4
C. Anderson Zilvia Addict Join Date: Mar 2005 Location: Memphis, TN Posts: 753 Trader Rating: (17) Feedback Score: 17 reviews	Thanks! I'll check that out.

05-03-2008, 07:05 AM	#5
juls213 Leaky Injector Join Date: Feb 2006 Location: NJ Posts: 95 Trader Rating: (0) Feedback Score: 0 reviews	What kind of compressor and bracket are you using? I have an s14 with s13redtop. Can i use the sr bracket with s14kade compressor? Guys I need AC lol