|
|
|||||||
| Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
| S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15. |
 |
|
|
Thread Tools | Display Modes |
|
|
07-09-2015, 04:36 AM
|
#1 |
|
Jumping Wires for A/C ?
Hey everyone,
Regarding jumping wires for a/c, what do they mean by that? Do I run a wire that's connected to each? Or do I run a powered 12v wire to each? This is for a 98 240 SE, with an s14 SR if that makes any differences. I found the thread for jumping a/c wires to get the compressor to turn on, but it didn't go into detail on what to do exactly so I don't wanna fry anything. Appreciate the help! Last edited by beeronz; 07-09-2015 at 05:11 AM.. |
|
|
|
| Sponsored Links |
|
07-10-2015, 10:22 AM
|
#2 | ||
|
Zilvia FREAK!
 
Join Date: Nov 2007
Location: dallas, TX
Age: 38
Posts: 1,244
Trader Rating: (12)
  Feedback Score: 12 reviews
|
Typically when people refer to "jumping wires" to get the a/c compressor to turn on they are talking about the pressure switch. if you are working with any empty system (which i assume you are) you shouldnt need to jump any wires on a properly evacuated system that is holding vac, and ready for a charge.
__________________
 Quote:
Quote:
|
||
|
|
|
|
07-10-2015, 03:05 PM
|
#3 | |
|
Quote:
I attached the image of the part I'm questioning about from a thread I found online. I didn't want to revive an old thread. |
||
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
