S13 Digital Speedometer with HUD Reads 0 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

dil_s13 · 11-27-2015, 12:05 PM

-1992 S13 KA24DE
-Manual transmission
-Digital cluster with HUD

I have searched through many forums, but cannot find my issue.
My speedometer does not work.
The digital screen in the cluster and the one for the HUD both light up and read 0. Any issues that I've read about that others have with the HUD cluster are concerning the screen not lighting up at all.
I have replaced the VSS with a new one.
Everything else in the cluster works, besides the odometer of course.

Any help is much appreciated.

Matej · 11-27-2015, 03:11 PM

Have you tried going faster?

christianos13 · 11-27-2015, 03:29 PM

speed sensor?

dil_s13 · 11-27-2015, 03:32 PM

Quote:

Originally Posted by Matej

Have you tried going faster?

133 MPH using GPS

Sent from my m8 using Tapatalk

dil_s13 · 11-27-2015, 03:33 PM

Quote:

Originally Posted by christianos13

speed sensor?

I said I replaced the VSS with a new one.

Sent from my m8 using Tapatalk

Gingersmurf · 11-27-2015, 03:44 PM

Probably a bad ground somewhere.. good luck

Kuma · 11-27-2015, 05:14 PM

Quote:

Originally Posted by dil_s13

133 MPH using GPS

Sent from my m8 using Tapatalk

GPS isn't always correct.

Are you sure you weren't going 0mph?

Seriously though... I know something needs to be changed other than the cluster subharness. I had a digi cluster that read 0 in a vert I bought. I found the original cluster in the trunk with the sub harness... swapped back to the original one and it worked fine... So I'm sure the PO didn't change something, and I didn't care enough to find out what it was.

gvelonoe · 11-27-2015, 11:55 PM

i like it very much,thank you

dil_s13 · 11-28-2015, 10:07 AM

Okay. So I found out that the wire from the VSS leads to a plug that is supposed to go to the cruise control module. Does anyone know how I can wire the two wires from the VSS directly to my speedometer?

Sent from my m8 using Tapatalk

11-27-2015, 12:05 PM	#1
dil_s13 Join Date: Nov 2015 Location: Apopka, FL Age: 26 Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	S13 Digital Speedometer with HUD Reads 0 -1992 S13 KA24DE -Manual transmission -Digital cluster with HUD I have searched through many forums, but cannot find my issue. My speedometer does not work. The digital screen in the cluster and the one for the HUD both light up and read 0. Any issues that I've read about that others have with the HUD cluster are concerning the screen not lighting up at all. I have replaced the VSS with a new one. Everything else in the cluster works, besides the odometer of course. Any help is much appreciated.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-27-2015, 03:11 PM	#2
Matej Post Whore! Join Date: Feb 2007 Location: N/A Posts: 9,423 Trader Rating: (39) Feedback Score: 39 reviews	Have you tried going faster?

11-27-2015, 03:29 PM	#3
christianos13 Leaky Injector Join Date: Dec 2012 Location: west TX Age: 33 Posts: 60 Trader Rating: (0) Feedback Score: 0 reviews	speed sensor?

11-27-2015, 11:55 PM	#8
gvelonoe Join Date: Nov 2015 Location: FL Age: 36 Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	i like it very much,thank you

11-28-2015, 10:07 AM	#9
dil_s13 Join Date: Nov 2015 Location: Apopka, FL Age: 26 Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	Okay. So I found out that the wire from the VSS leads to a plug that is supposed to go to the cruise control module. Does anyone know how I can wire the two wires from the VSS directly to my speedometer? Sent from my m8 using Tapatalk