Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 11-21-2017, 08:01 PM   #1
Beerax
 
Join Date: May 2017
Location: Arizona
Age: 25
Posts: 10
Trader Rating: (0)
Beerax is an unknown quantity at this point
Feedback Score: 0 reviews
KA-T bad 02 sensor??

I recently ditched the exhaust/cat on my NISTUNE KA24de-t, the thing is after I pulled it I didn't run the car for for more than 5 minutes 2-3 weeks so I couldn't exactly direct back to the exhaust after having issues because they are only when the car warms up. I have 2 02 sensors, one right after turbo and one further down on the down pipe, the one further down on the pipe is about a foot right before the exhaust is open. Could that maybe be throwing off that 02? Also car is idling around 10.9 - 11 AFR warm and after a few hard revs, before will stick around 12-12.4. I know 02 sensors usually don't function until car is warm which is when car gets funky, misfire under very small throttle; to eventually maybe even dying at stops unless I am giving it gas. I mean either way it wouldn't hurt to throw new 02's at it anyways, but just curious whether to try finishing the exhaust all the way through first or throw in some new 02's.

Any thoughts?
Beerax is offline   Reply With Quote
Sponsored Links
Old 11-21-2017, 08:39 PM   #2
anti tyler
GM2 (SW/AW)
 
anti tyler's Avatar
 
Join Date: Jul 2008
Location: US
Posts: 3,349
Trader Rating: (37)
anti tyler is close to perfectionanti tyler is close to perfectionanti tyler is close to perfectionanti tyler is close to perfectionanti tyler is close to perfectionanti tyler is close to perfectionanti tyler is close to perfectionanti tyler is close to perfectionanti tyler is close to perfectionanti tyler is close to perfectionanti tyler is close to perfection
Feedback Score: 37 reviews
Send a message via AIM to anti tyler Send a message via Yahoo to anti tyler
So what you're saying is, nothing is wrong, the AFR's are just showing lower that they were before?

I'm assuming (because you didn't say) that your 2nd sensor is just going to a wideband AFR gauge?


Quote:
I recently ditched the exhaust/cat on my NISTUNE KA24de-t, the thing is after I pulled it I didn't run the car for for more than 5 minutes 2-3 weeks so I couldn't exactly direct back to the exhaust after having issues because they are only when the car warms up.
Please re-read this.. As it makes absolutely no fucking sense at all.
__________________
Quote:
WillEastS14:
mannn u whylin son.
but that shyt has SWAG

KA-T for life!
Current for sale advertisement

anti tyler is offline   Reply With Quote
Old 11-21-2017, 08:54 PM   #3
Beerax
 
Join Date: May 2017
Location: Arizona
Age: 25
Posts: 10
Trader Rating: (0)
Beerax is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by anti tyler View Post
So what you're saying is, nothing is wrong, the AFR's are just showing lower that they were before?

I'm assuming (because you didn't say) that your 2nd sensor is just going to a wideband AFR gauge?




Please re-read this.. As it makes absolutely no fucking sense at all.
Lmao my bad, I'm trying to type this all out on my pos phone. What I'm trying to say only reason I'm not sure whether or not to direct back to me pulling the exhaust causing the issue is because after I DID pull it, I didn't really run the car; or if I did it was for about 5 minutes max, NOT fully warm so issues weren't occurring and RECENTLY I just started running the car, allowing it to fully warm up.. Car runs GREAT cold, no hesitation, awesome throttle response, once it gets warm - choppy idle, if I give it very Minimal gas it will hesitate/misfire very bad almost causing it to die. It will die if I am actually driving it and come to a stop without staying on the gas. Hope that makes a little more sense
Beerax is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:12 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™