Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


Reply
 
Thread Tools Display Modes
Old 04-25-2013, 03:36 PM   #1
Future_gohan
Zilvia Addict
 
Join Date: Mar 2009
Location: Pittsburgh, PA
Age: 31
Posts: 919
Trader Rating: (5)
Future_gohan is an unknown quantity at this point
Feedback Score: 5 reviews
Sr20 oil burning issue

Okay, so I've had my sr for about 10k miles without issue, and now i'm having a weird issue I think might be PCV related or rings related.

So far this has happened twice on me, both within the last two weeks.

When i'm going down hill, first time was off the gas but in gear, second time with on the gas around 4k rpms, I noticed when i looked behind me It was pooring blue smoke from the exhaust, but as soon as i leveled out it went away. I originally thought it was because it was overfull, but now it's a little under full, and it just did it again today(For the second time).

Again, other issue i noticed is when this happens I popped my hood and the dip stick is popped up and leaked some oil out of it.

It has only happened twice, but it bothers me none the less, and i'm curious as to what anyone things it is?

SPECS:
S13 redtop Sr20 bone stock never opened
Greddy intake manifold
ISIS exhaust manifold
S14 T28 Turbo Charger(very little to no play at all)
3" Megan turbo elbow and downpipe to stock exhaust
Midmount intercooler setup
Stock otherwise.

I changed the plugs almost directly after it happened the first time and I just replaced all the exhaust side gaskets(blew the 4bolt)

Any ideas?
__________________
Future_gohan is offline   Reply With Quote
Sponsored Links
Old 04-25-2013, 06:26 PM   #2
Future_gohan
Zilvia Addict
 
Join Date: Mar 2009
Location: Pittsburgh, PA
Age: 31
Posts: 919
Trader Rating: (5)
Future_gohan is an unknown quantity at this point
Feedback Score: 5 reviews
I pulled the pcv and it was new. Would this happen because the sr has no catch can?
__________________
Future_gohan is offline   Reply With Quote
Old 04-25-2013, 09:42 PM   #3
fliprayzin240sx
Man w/ CTSV & a Car Seat
 
fliprayzin240sx's Avatar
 
Join Date: Aug 2002
Location: Tampa
Posts: 17,998
Trader Rating: (19)
fliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfection
Feedback Score: 19 reviews
Send a message via AIM to fliprayzin240sx
Just cuz your dipstick popped off, Blow by...time to do a compression check!!!
__________________

If you think Zilvia has too many assholes...
CLICK HERE!!!
fliprayzin240sx is offline   Reply With Quote
Old 04-25-2013, 10:01 PM   #4
ivantheterribl3
 
Join Date: Jul 2012
Location: wheaton, md
Posts: 46
Trader Rating: (0)
ivantheterribl3 is an unknown quantity at this point
Feedback Score: 0 reviews
And leak down.
ivantheterribl3 is offline   Reply With Quote
Old 04-27-2013, 10:05 AM   #5
Mr. Phonso
Zilvia Junkie
 
Join Date: Apr 2008
Location: toronto
Posts: 315
Trader Rating: (3)
Mr. Phonso is an unknown quantity at this point
Feedback Score: 3 reviews
Do you still have the hose installed that goes from the valve cover to turbo inlet?
Mr. Phonso is offline   Reply With Quote
Old 04-29-2013, 10:52 AM   #6
Future_gohan
Zilvia Addict
 
Join Date: Mar 2009
Location: Pittsburgh, PA
Age: 31
Posts: 919
Trader Rating: (5)
Future_gohan is an unknown quantity at this point
Feedback Score: 5 reviews
Quote:
Originally Posted by Mr. Phonso View Post
Do you still have the hose installed that goes from the valve cover to turbo inlet?
Yes i do?

I did a comp and leak down test and it all tested out good, so i replaced the o ring on the dip stick and it hasn't happened again.
__________________
Future_gohan is offline   Reply With Quote
Old 05-02-2013, 04:09 PM   #7
Future_gohan
Zilvia Addict
 
Join Date: Mar 2009
Location: Pittsburgh, PA
Age: 31
Posts: 919
Trader Rating: (5)
Future_gohan is an unknown quantity at this point
Feedback Score: 5 reviews
Okay, so having somewhat of the same issue.

The Dip Stick hasn't popped out sense I changed the o-ring, so that is good, but I'm still getting blue smoke pooring from my exhaust going down hills for long periods of time, and living in PA i can't help but go up and down hills. >_>;

So i thought it might have been because I have my valve cover T going from the T to the intake like it's suppose to but without a catch can. So till my catch can comes in i went to advance, blocked up the hole on the intake, and put a filter on the T on the valve cover.

And drove it.

And it still does it.

My question is, I hear sometimes you have to put a restrictor on turbos, I have an S14 T28 with ISIS stainless lines, how would i know if i need that restrictor, and could that be causing this? Or is my turbo just shot?
__________________
Future_gohan is offline   Reply With Quote
Old 05-02-2013, 04:29 PM   #8
ultimateirving
Zilvia FREAK!
 
ultimateirving's Avatar
 
Join Date: Nov 2010
Location: arizona
Age: 33
Posts: 1,519
Trader Rating: (1)
ultimateirving is an unknown quantity at this point
Feedback Score: 1 reviews
Pull off ur hot pipe on the turbo?
any oil residue in there?
Popped dipstick means pressure is getting into the crankcase with nowhere to go.
So check ur pcv is operating normally and make sure u have a catch can hooked up and with the proper suction.
__________________
Z32 with lq4 swap
Desert Street Scene || Dssevents.com
ultimateirving is offline   Reply With Quote
Old 05-02-2013, 06:16 PM   #9
Future_gohan
Zilvia Addict
 
Join Date: Mar 2009
Location: Pittsburgh, PA
Age: 31
Posts: 919
Trader Rating: (5)
Future_gohan is an unknown quantity at this point
Feedback Score: 5 reviews
PCV is fine, the o ring on the dip stick was bad, the dip stick just wasn't staying in.

PCV valve is brand new.

there isn't any oil residue in the hot pipe, i had it off last weekend and it was clean as a whistle.

only thing that is going on now is it blows smoke going down hills only.
__________________
Future_gohan is offline   Reply With Quote
Old 05-02-2013, 07:21 PM   #10
ultimateirving
Zilvia FREAK!
 
ultimateirving's Avatar
 
Join Date: Nov 2010
Location: arizona
Age: 33
Posts: 1,519
Trader Rating: (1)
ultimateirving is an unknown quantity at this point
Feedback Score: 1 reviews
This is in gear on decel right?
Something is drawing oil into the engine and burning it. Can you take a clear picture of the head from the drivers side please.
make sure its enough that we can see the intake manifold too
Thanks
__________________
Z32 with lq4 swap
Desert Street Scene || Dssevents.com
ultimateirving is offline   Reply With Quote
Old 05-02-2013, 07:46 PM   #11
Future_gohan
Zilvia Addict
 
Join Date: Mar 2009
Location: Pittsburgh, PA
Age: 31
Posts: 919
Trader Rating: (5)
Future_gohan is an unknown quantity at this point
Feedback Score: 5 reviews
Quote:
Originally Posted by ultimateirving View Post
This is in gear on decel right?
Something is drawing oil into the engine and burning it. Can you take a clear picture of the head from the drivers side please.
make sure its enough that we can see the intake manifold too
Thanks

Here, and it has done it both in gear and out.
Attached Images
File Type: jpg sr1.jpg (73.4 KB, 16 views)
File Type: jpg sr2.jpg (70.1 KB, 14 views)
__________________
Future_gohan is offline   Reply With Quote
Old 05-15-2013, 02:29 AM   #12
norcaldriftin
Zilvia Member
 
Join Date: Sep 2012
Location: Chico CA
Age: 30
Posts: 220
Trader Rating: (1)
norcaldriftin is an unknown quantity at this point
Feedback Score: 1 reviews
sounds like a ripped valve stem seal. Or valve stem seal related.
Ive had the same problem for almost 10k miles. Doesn't affect compression at all or performance just smokes kinda bad after deceel or idle.
norcaldriftin is offline   Reply With Quote
Old 05-15-2013, 03:00 AM   #13
FORZA MILAN0
Leaky Injector
 
Join Date: May 2013
Location: Burbank,Ca
Age: 31
Posts: 101
Trader Rating: (0)
FORZA MILAN0 is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by norcaldriftin View Post
sounds like a ripped valve stem seal. Or valve stem seal related.
Ive had the same problem for almost 10k miles. Doesn't affect compression at all or performance just smokes kinda bad after deceel or idle.
+1

I had the same issue but only happend during idle.
FORZA MILAN0 is offline   Reply With Quote
Old 05-15-2013, 05:40 AM   #14
Future_gohan
Zilvia Addict
 
Join Date: Mar 2009
Location: Pittsburgh, PA
Age: 31
Posts: 919
Trader Rating: (5)
Future_gohan is an unknown quantity at this point
Feedback Score: 5 reviews
No, i was an idiot i suppose, the drain on the turbo somehow sprung a leak but it was only leaking going down hill and only hit my exhaust, so under my car was still completely dry so i didn't notice it. It had a tiny pinhole in the hose, i replaced it and It hasn't happened sense! Thank god
__________________
Future_gohan is offline   Reply With Quote
Old 05-15-2013, 11:48 AM   #15
ultimateirving
Zilvia FREAK!
 
ultimateirving's Avatar
 
Join Date: Nov 2010
Location: arizona
Age: 33
Posts: 1,519
Trader Rating: (1)
ultimateirving is an unknown quantity at this point
Feedback Score: 1 reviews
Praise for easy fix!
__________________
Z32 with lq4 swap
Desert Street Scene || Dssevents.com
ultimateirving is offline   Reply With Quote
Old 05-15-2013, 02:53 PM   #16
Future_gohan
Zilvia Addict
 
Join Date: Mar 2009
Location: Pittsburgh, PA
Age: 31
Posts: 919
Trader Rating: (5)
Future_gohan is an unknown quantity at this point
Feedback Score: 5 reviews
Quote:
Originally Posted by ultimateirving View Post
Praise for easy fix!
Yeah, I couldn't ever tell it just looked like it was coming out of the exhaust when i was driving, thank the lord I didn't have to do anything major.
__________________
Future_gohan is offline   Reply With Quote
Old 05-15-2013, 03:34 PM   #17
FORZA MILAN0
Leaky Injector
 
Join Date: May 2013
Location: Burbank,Ca
Age: 31
Posts: 101
Trader Rating: (0)
FORZA MILAN0 is an unknown quantity at this point
Feedback Score: 0 reviews
Oh lord God Bless America... I hate having to do valve seals.
FORZA MILAN0 is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:20 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™