emange w/z32 maf question (idle voltage) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

gorillam · 07-27-2008, 09:07 PM

Supplimentry to my idling problem thread, I am running z32maf with emanage.

rotary settings 2-0-7 in the software maf is set to hw2.

Questions for you guys,
1. what should the output (stock sr20maf voltage) be at idle 750rpm.
2. what should the z32 maf voltage be at 750rpm.

Sorry for all the questions I am making progress and figured out that my battery was not grounded well enough, including my intake - body. it smoothed it a bit, but I think my car is running super lean. Little bit of deto at 2psi.

07-27-2008, 09:07 PM	#1
gorillam Join Date: Nov 2007 Location: calgary ab Age: 36 Posts: 16 Trader Rating: (0) Feedback Score: 0 reviews	emange w/z32 maf question (idle voltage) Supplimentry to my idling problem thread, I am running z32maf with emanage. rotary settings 2-0-7 in the software maf is set to hw2. Questions for you guys, 1. what should the output (stock sr20maf voltage) be at idle 750rpm. 2. what should the z32 maf voltage be at 750rpm. Sorry for all the questions I am making progress and figured out that my battery was not grounded well enough, including my intake - body. it smoothed it a bit, but I think my car is running super lean. Little bit of deto at 2psi.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode