mehsilvia

I added a 14" Flowmaster to my Borla Comp exhaust (basically straight pipe to the CAN) and it didnt do much to silence it. Still loud as fuck.

My , find an exhaust with a tone you like, cause modifying it is iffy, and silencers are :ghey:

bejota180sx

how bout that apex'i vave thing, should quiet it down enough for a quiet ride... im thinking about going with the manual one not the electric one...

__________________

hOngsterr

its a flowmaster,
thats not gunna silence your car
lol.

my set up is a HKS cat-back but i took off the axle-back and replaced it
with blast pipes,
uber quiet when cruising.

when ima sell my HKS cat-back my cars gunna be straight pipe
with this resonator, or similar.

__________________
- Hong

angel mkiv

1. ok so i have a 91 auto 240sx and ima do a s13 sr20 swap....so since im doin a auto to 5speed swap with a sr20 tranny do i use my old auto tranny speed sensor since you need the usa ka speed sensor because of the mph and kilometers difference..right?

2. also what exacly do i need to keep from the ka24de for the swap..from what i know i need to keep the alternator, speed sensor, and lower engine harness...what else..

mehsilvia

LOL. Normally i would agree, but its one of their reasonators designed to supress the noise. The exhaust guru i purchased this unit from had said most really dont do shit. The unit looks EXACTLY like the one you posted above.

It did tone down the exhaust when at WOT, but not shit for idle or when in the lower RPM range.

udon!

i just looked at a car for sale.

after i come back from a testdrive, the coolant tank was overflowing.

the guy said it was because it had extra coolant in it and that the motor was freshly rebuilt, so it runs hotter as of right now.



is it true that a freshly rebuilt engine (ka24e) will run hotter than normal untill broken in?

XnTroubleX

Ive researched but cannot find the thread with the wiring diagram for doing a 180sx type-x cluster conversion! Can somebody throw me a link. Picked me up one and would like to read up on it a bit before I attempt it.

Smurf_240SX

Answered my own question.

No they wont!

__________________

FS OEM RB25 PARTS

amdnivram

has anyone had a noise coming from their steering wheel? Or the hub? It sounds like its rubbing but I've taken it completely apart and i see nothing wrong.

__________________


http://silaudrey.blogspot.com/

I LUV MY S13

Nardi Deep Dish Corn Steering Wheel 330mm NissanR32-35:eBay Motors (item 180445828968 end time Jan-14-10 08:47:11 PST)

legit or not?

__________________



-Jorge

udon!

didnt you get cr kai's a while back lol?

angel mkiv

anybody??? becuase ima sell my old ka24de motor and tranny set for parts and wanna know what i need to keep..thanks

udon!

99% sure thats legit

I LUV MY S13

positive?

i was comparing it to the frsports one and it looks a lil funky..but idk

__________________



-Jorge

Zero-Offset

I have the Nob Nardi copy off ebay, and it looks almost identical to the one posted. It was similar in price also, so im guessing its not the real thing and a copy like mine.

Nardi NOB TANIGUCHI MODEL CLASSIC STEERING WHEEL SPARCO on eBay.ca (item 270499072649 end time 08-Jan-10 20:08:41 EST)

I like the wheel i got, its not real leather, but for almost 1/3 of the price im not complaining. Its nicer than my ratty looking and feeling stock one.
Only shitty thing is the turn signal doesn't click off, you have to do it by hand. But i believe this is the norm for all aftermarket wheels.
Hope i could be of some assistance.

udon!

what would be the perfect sized 18" wheel for a stock bodied s13 with just rolled fenders where the lip sticks out a couple mm outside the fender?

im bored lol.

kalypso123

Stock head studs vs ARP head studs... how much more boost can a sohc KA withstand with the ARP's.

ayuaddict

9.5j -5 (205/40)
10.5 +19 (225/45)

worked for me, but with 17s. (well it polished the outer lip of my wheels and the wheel arches)

RYAN_S-14

irritatedmax

my bro used this when he did his swap. its a wiring guide but has what you need listed and has nice pics. SR20DET Swap Engine Harness Wiring Diagram Guide SR SR20

if the coolant is over filled initially, it will overflow until it reaches the correct level. the system gets hot, coolant expands, pushes out what won't fit, and that may cause it to slightly overflow. was the car over heating? it sounds a bit fishy. my rebuild ka24de wasn't running REALLY hot after the first startup and certainly wasn't boiling over.

__________________

Slammed180

Item location is in China.
Buy it now price of $124

Pretty sure it's a knock off.

__________________
Blow me, bitches.

RYAN_S-14

It run low boost and some smaller injectors (370) t-25, or t-26 turbo on 7 psi. I dont think that motor is really lookinbg for boost, if you weant to push it rebuild the head, and block to handle boost.

Then again if it was me id just beat the crap out of it tell it broke, there are way to stop from breaking it i.e. Wideband and other gauges, oil-water temp things like that can warn you your about to blow. there is always ways to stop bad things from happaning, i ran a 450WHP CA18DET back when i lived in Japan and that was scary but negotiable

enkei2k

how many bulbs are there in the cluster? speedo and tach for S14? i've read some places say 3 and some say 5, but not 100% sure. can't take out to check because i'm at work.

__________________
Ask enkei2k

xquizitditz

hOngsterr

hmmm, true. then i guess.....
run a box resonator.

well heres my set up,

HKS CATBACK, axle back removed (can exhaust), added axle back blast pipes,

super quiet for idle, and hums at low rpm,

i can get a vid if you guys wanna see.




knockoff george! knockoff!
locations china and there should be a pic taken that says nardi engraved in the front and they didn't take a pic of that.

sometimes knockoffs work better then brand name.

x2

__________________
- Hong

lewisfk

I'm looking to buy a bodykit for my motorcycle, instead of buying new fairings from a local dealer. Local dealers sale new fairings from 450 to 650, painted or unpainted. If you went the body kit route please fill free to pm me! I own 05 ninja 636, the color is a standard blue and black scheme.

Teddy

The sunroof on my fastback whistles at high speeds, like 75-80mph. It's very annoying. If I pull down a little harder on the latch, it stops.

Do I need to replace the latch or the weather stripping? I just want to make sure before I order expensive weather stripping.

__________________
www.realize-jp.net

hOngsterr

i think that should cover it,
if not then sorry idk lol.

this was on the first page.

__________________
- Hong

Teddy

OMG what a fucking moron I am.

Sorry.

Thanks bro.

__________________
www.realize-jp.net

Brian

LOL, sick response.

__________________
http://bhworld.wordpress.com/

Slammed180

I calls 'em as I sees 'em.
lol.

__________________
Blow me, bitches.