UniqueAutoCreations

Presents: S13 Big Angle Speaker Plates




Big Angle Speaker Plates

UAC's BA Speaker Adapters replace the existing factory Nissan ones allowing for a 6.5" round speaker to mount in the doors instead of the stock 4x6"ones. Other kits out there offer a flat plate to mount the speaker on, which results in having the mids and highs aimed at the foot well. Our plates are superior because they aim the new speakers up as close to the factory angle as possible resulting in improved sound quality. Fits behind the stock grills and door panels. Plates mount to doors using factory bolts and speakers mount with included hardware. Accepts 6.5" round speakers that require a 5 1/16" cutout or less, but they should be test fitted with the window rolled all the way down before bolting them in. The distance between the magnet and the glass determines the maximum depth/magnet diameter of the speaker.

• Kit includes: one left plate, one right plate, stainless screws, capture nuts, and one drill bit. Speakers NOT included
• Installation is straightforward and comes with a detailed easy to follow install guide.
• Fits 89-94 240sx, Silvia, 180sx, and all S13 models
• Price: $74.99 + shipping & tax if applicable.

Click here for the Install Guide

Click here for the Speaker Selection Guide

FYI S14's already have 6.5" door speakers.

These will not fit R32's











For Orders please purchase through our site www.UniqueAutoCreations.com We accept PayPal and most major credit cards. This is really helpful for keeping track of orders, but if you would prefer an old fashioned invoice I can do that too. Just PM me with your PayPal info and whether or not you are a Texas resident.

International Buyers, please contact me for an Invoice with the correct shipping charges. Thanks!

PM's welcome! I'll do my best to take care of your questions and orders in a timely manner.

Don't forget to check out our site for other cool S-Chassis parts too: www.UniqueAutoCreations.com

__________________
Get custom 240sx parts at:
www.UniqueAutoCreations.com

1ZlowZ

How far do they put the speaker face from door panel?
Could a spacer be added to increase distance from glass to magnet?

__________________
-Victor S.

UniqueAutoCreations

The corner of the speaker sits pretty close to the back of the grill on the door panel when mounted. That being said, I managed to space a pair a little with a sheet of craft foam paper. I just made a gasket for the speaker frame to sit on that sandwiched between the speaker and the BA Plate. I think overall spacing after the foam compressed was about 1/8" if memory serves correct. Craft foam paper can be purchased at most any arts & craft store for $1-2. It's super cheap. Unfortunately there is just not that much extra space since this kit is putting a much larger speaker here than was originally intended.

However if you made some sort of spacer for the factory grills you may be able to get some more room. I haven't tried that yet, but with a little creativity I can't see why it wouldn't work. I guess it just depends on how much extra space you need.

Thanks for your interest!

__________________
Get custom 240sx parts at:
www.UniqueAutoCreations.com