MD KAT Build Parts.......Arias, Eagle - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

SiDwAyZ240 · 07-15-2012, 11:50 PM

First up is the BNIB Eagle "H" Beam Rods. Has ARP Rod Bolts Installed

$SOLD/Shipped

I have used Arias 9.5:1 89.9mm forged pistons. I have never used these, but they look to be in decent shape, I just want back what I have in to them. There are some scrathes and dings on them that look to be from storage and moving around but no cracks or deformaties of any kind. They do have a build up of carbon on the dishes that cleans off with some elbow grease and cleaner, I posted a picture of one I cleaned up pretty good and what they looked like originally. I also have the spec sheet with all the clearances and part numbers that I got straight from Arias. I'm no expert so I would have these checked out by a machine shop before using at the time of getting your blocked machined and stuff. I was going to have them checked and any scratches polished out but I'm not going to be building a motor any time soon. I would rather use the money for some decent wheels.

$175 OBO/Shipped

WOULD DO PACKAGE FOR $425/Shipped

paypal is: [email protected]

SMM · 07-16-2012, 12:49 AM

89.9 mm?

9.5:1 comp?

Not seeing either of those for a KA.
Arias Pistons

waxball88 · 07-16-2012, 02:09 AM

Prob 89.5/20 over

Lowest on rods?

SiDwAyZ240 · 07-16-2012, 09:35 AM

Yeah, I couldn't find them either and I thought I got ripped off. I contacted Arias directly with the model number that is stamped on the underside of the piston. I received this:
Forwarded Message -----
From: NANCY ROBERTS <[email protected]>
To: 'Jason Ruch' <[email protected]>
Sent: Monday, March 5, 2012 6:21 PM
Subject: RE: piston #350525

Phone: (310) 532-9737 13420 South Normandie Avenue Fax: (310) 516-8203 Gardena, CA 90249http://www.ariaspistons.com/ [email protected]CUSTOMER SPECIFICATIONSSAVE FOR REORDERINGJob Card #: 350525 Customer: Account #:Date:#######Cylinders:Make:Model:Spec:Head:Head cc:4 NISSANKA24DE20# TC GAS4 VALVE43 Displacement:149.072443.77INSTALLATION INSTRUCTIONS: Finished Bore:3.543 89.99ARIAS FORGED PISTONS ARE MANUFACTURED TO PROVIDE Stroke:3.780 96.01PISTON TO CYLINDER WALL CLEARANCE AS INDICATED BELOW, Rod Length:6.496 165.0BASED ON BORE DIAMETER GIVEN AT TIME OF ORDER. Comp. Height:1.34034.04 *Clearance:.00400.102MM Compression:9.50 9.50

Pin Diameter:.82721.0 Top Groove:.0601.5 2nd Groove:.0601.5 Oil Groove:.1584.0 Piston Weight:385.0Part NumberQty Pistons:DISH\4VR-24 Pins:A82723514SN4 Rings:NSI-3041.5x1.5x4.0x89.5MM CHROME Locks:827043S8 Buttons:*NOTE: IF PISTONS ARE PRO-COATED, SUBTRACT .002 FROM CLEARANCE NUMBER. GLS:PULLED BY: DATE: INSPECTED BY: DATE:

I pasted this in so the format is weird. It looks alot better in email that I will send to you if you buy them but you can see all the specs and things.

SiDwAyZ240 · 07-17-2012, 08:13 PM

Semi flexible on the price bump

SiDwAyZ240 · 07-22-2012, 11:09 AM

Last try for OBO........

SiDwAyZ240 · 08-13-2012, 05:58 PM

Prices Lowered

ILoveMyRHS13 · 08-13-2012, 08:00 PM

I'll give you $280 shipped for the rods on friday when I get paid.

SiDwAyZ240 · 08-14-2012, 08:55 PM

280/shipped going once........

SiDwAyZ240 · 08-17-2012, 07:35 PM

Rod sold, I'll let the pistons go cheap. Try me.....

lazymofo · 08-18-2012, 03:17 PM

i assume you dont have the rings for them??

07-15-2012, 11:50 PM	#1
SiDwAyZ240 Zilvia Member Join Date: Sep 2009 Location: MD Age: 40 Posts: 204 Trader Rating: (13) Feedback Score: 13 reviews	KAT Build Parts.......Arias, Eagle First up is the BNIB Eagle "H" Beam Rods. Has ARP Rod Bolts Installed $SOLD/Shipped I have used Arias 9.5:1 89.9mm forged pistons. I have never used these, but they look to be in decent shape, I just want back what I have in to them. There are some scrathes and dings on them that look to be from storage and moving around but no cracks or deformaties of any kind. They do have a build up of carbon on the dishes that cleans off with some elbow grease and cleaner, I posted a picture of one I cleaned up pretty good and what they looked like originally. I also have the spec sheet with all the clearances and part numbers that I got straight from Arias. I'm no expert so I would have these checked out by a machine shop before using at the time of getting your blocked machined and stuff. I was going to have them checked and any scratches polished out but I'm not going to be building a motor any time soon. I would rather use the money for some decent wheels. $175 OBO/Shipped WOULD DO PACKAGE FOR $425/Shipped paypal is: [email protected] Last edited by SiDwAyZ240; 08-17-2012 at 07:34 PM.. Reason: Prices Lowered

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-16-2012, 12:49 AM	#2
SMM Zilvia Addict Join Date: Sep 2009 Location: tampa Age: 33 Posts: 819 Trader Rating: (26) Feedback Score: 26 reviews	89.9 mm? 9.5:1 comp? Not seeing either of those for a KA. Arias Pistons

07-16-2012, 02:09 AM	#3
waxball88 Zilvia FREAK! Join Date: Jun 2009 Location: Gainesville Posts: 1,061 Trader Rating: (9) Feedback Score: 9 reviews	Prob 89.5/20 over Lowest on rods?

07-16-2012, 09:35 AM	#4
SiDwAyZ240 Zilvia Member Join Date: Sep 2009 Location: MD Age: 40 Posts: 204 Trader Rating: (13) Feedback Score: 13 reviews	Yeah, I couldn't find them either and I thought I got ripped off. I contacted Arias directly with the model number that is stamped on the underside of the piston. I received this: Forwarded Message ----- From: NANCY ROBERTS <[email protected]> To: 'Jason Ruch' <[email protected]> Sent: Monday, March 5, 2012 6:21 PM Subject: RE: piston #350525 Phone: (310) 532-9737 13420 South Normandie Avenue Fax: (310) 516-8203 Gardena, CA 90249http://www.ariaspistons.com/ [email protected]CUSTOMER SPECIFICATIONSSAVE FOR REORDERINGJob Card #: 350525 Customer: Account #:Date:#######Cylinders:Make:Model:Spec:Head:Head cc:4 NISSANKA24DE20# TC GAS4 VALVE43 Displacement:149.072443.77INSTALLATION INSTRUCTIONS: Finished Bore:3.543 89.99ARIAS FORGED PISTONS ARE MANUFACTURED TO PROVIDE Stroke:3.780 96.01PISTON TO CYLINDER WALL CLEARANCE AS INDICATED BELOW, Rod Length:6.496 165.0BASED ON BORE DIAMETER GIVEN AT TIME OF ORDER. Comp. Height:1.34034.04 Clearance:.00400.102MM Compression:9.50 9.50 Pin Diameter:.82721.0 Top Groove:.0601.5 2nd Groove:.0601.5 Oil Groove:.1584.0 Piston Weight:385.0Part NumberQty Pistons:DISH\4VR-24 Pins:A82723514SN4 Rings:NSI-3041.5x1.5x4.0x89.5MM CHROME Locks:827043S8 Buttons:NOTE: IF PISTONS ARE PRO-COATED, SUBTRACT .002 FROM CLEARANCE NUMBER. GLS:PULLED BY: DATE: INSPECTED BY: DATE: I pasted this in so the format is weird. It looks alot better in email that I will send to you if you buy them but you can see all the specs and things.

07-17-2012, 08:13 PM	#5
SiDwAyZ240 Zilvia Member Join Date: Sep 2009 Location: MD Age: 40 Posts: 204 Trader Rating: (13) Feedback Score: 13 reviews	Semi flexible on the price bump

07-22-2012, 11:09 AM	#6
SiDwAyZ240 Zilvia Member Join Date: Sep 2009 Location: MD Age: 40 Posts: 204 Trader Rating: (13) Feedback Score: 13 reviews	Last try for OBO........

08-13-2012, 05:58 PM	#7
SiDwAyZ240 Zilvia Member Join Date: Sep 2009 Location: MD Age: 40 Posts: 204 Trader Rating: (13) Feedback Score: 13 reviews	Prices Lowered

08-14-2012, 08:55 PM	#9
SiDwAyZ240 Zilvia Member Join Date: Sep 2009 Location: MD Age: 40 Posts: 204 Trader Rating: (13) Feedback Score: 13 reviews	280/shipped going once........

08-17-2012, 07:35 PM	#10
SiDwAyZ240 Zilvia Member Join Date: Sep 2009 Location: MD Age: 40 Posts: 204 Trader Rating: (13) Feedback Score: 13 reviews	Rod sold, I'll let the pistons go cheap. Try me.....

08-18-2012, 03:17 PM	#11
lazymofo Leaky Injector Join Date: Dec 2005 Location: Hustle town Posts: 115 Trader Rating: (1) Feedback Score: 1 reviews	i assume you dont have the rings for them??