s13 with sr20det with apexi pfc idling problem! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

MasEkapses · 10-20-2020, 01:16 AM

Hello guys i have a sr20det build mated with the power fc. My problem is i cannot get the idling rpm under 1300. As soon as i command lower rpms the car is hunting like mad. i did the idling learning procedure a few times with no avail. I tried to manually set the idle through the idle screw but the screw seems to have no effect on the car. i looked for a vacuum leak but there is none. can it be that the apexi cannot handle the idling of the sr20det? Thanks!

jedi03 · 10-20-2020, 08:45 AM

have you tried adjusting the throttle plate? any codes set?

MasEkapses · 10-20-2020, 09:55 AM

yes i tried also with the throttle plate no effect either. What makes me mad is that the idle was perfect with the oem ecu.

S14rebuild · 10-20-2020, 01:20 PM

"Apparently" power fc setting for idle is a pain in the ass...so i was told qnd explained...ull need someone to tune the idle...

MasEkapses · 10-20-2020, 01:56 PM

Perhaps a forum member that has done it here. Because there isnt any tuner in germany that works with apexi pfc as i asked around.

S14rebuild · 10-20-2020, 01:57 PM

Kingtal0n.....pm him

MasEkapses · 10-20-2020, 02:04 PM

Thanks i will send him a pm!

10-20-2020, 01:16 AM	#1
MasEkapses Join Date: Oct 2020 Location: Germany Age: 26 Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	s13 with sr20det with apexi pfc idling problem! Hello guys i have a sr20det build mated with the power fc. My problem is i cannot get the idling rpm under 1300. As soon as i command lower rpms the car is hunting like mad. i did the idling learning procedure a few times with no avail. I tried to manually set the idle through the idle screw but the screw seems to have no effect on the car. i looked for a vacuum leak but there is none. can it be that the apexi cannot handle the idling of the sr20det? Thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-20-2020, 08:45 AM	#2
jedi03 Nissanaholic! Join Date: Jul 2008 Location: albuquerque Posts: 1,786 Trader Rating: (8) Feedback Score: 8 reviews	have you tried adjusting the throttle plate? any codes set?

10-20-2020, 09:55 AM	#3
MasEkapses Join Date: Oct 2020 Location: Germany Age: 26 Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	yes i tried also with the throttle plate no effect either. What makes me mad is that the idle was perfect with the oem ecu.

10-20-2020, 01:20 PM	#4
S14rebuild BANNED Join Date: May 2019 Location: Florida-FAIL Posts: 2,497 Trader Rating: (8) Feedback Score: 8 reviews	"Apparently" power fc setting for idle is a pain in the ass...so i was told qnd explained...ull need someone to tune the idle...

10-20-2020, 01:56 PM	#5
MasEkapses Join Date: Oct 2020 Location: Germany Age: 26 Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	Perhaps a forum member that has done it here. Because there isnt any tuner in germany that works with apexi pfc as i asked around.

10-20-2020, 01:57 PM	#6
S14rebuild BANNED Join Date: May 2019 Location: Florida-FAIL Posts: 2,497 Trader Rating: (8) Feedback Score: 8 reviews	Kingtal0n.....pm him

10-20-2020, 02:04 PM	#7
MasEkapses Join Date: Oct 2020 Location: Germany Age: 26 Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	Thanks i will send him a pm!