yingiang

Alright here's whats going on;
I swapped an S14 SR20DET into the car. It was in a friend's car prior to being in my car, he's on the forum; S14Tan. Anyway. I replaced the wiring harness with with a brand new PnP one from Wiring Specialties. I cut/extended the engine bay harness for my v-mount setup, remember it was just extended, not redone. Anyway. I have AEM series 1 map loaded into the EMS.
Key in(off) > Turn once(on) > fuel pump priming > turn another hold > ignition > motor turning > obviously or probably no spark. I let go to stop the motor turning. now it's on the 'on' position > turn to try and crank again > nothing. In order for motor to turn i'd have to start all over. > Off position > on > priming > turn key to crank.

if i let go it's like when you're trying to start a car without the clutch pushed in.
does anyone know what is wrong or what would be causing this symptom? I've checked all my fuses, my relays are untouched.
Need help!