Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > Specific Topics > Off Topic Chat

Off Topic Chat All non related chat goes here.


Reply
 
Thread Tools Display Modes
Old 02-15-2012, 07:44 PM   #1
Broadfield
Zilvia.net Advertiser
 
Broadfield's Avatar
 
Join Date: Oct 2006
Location: Normal, IL
Age: 47
Posts: 2,946
Trader Rating: (163)
Broadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to all
Feedback Score: 163 reviews
*Ask Broadfield*

I spend a LOT of time answering the same questions over and over again... and some of these answers are not short. I simply don't have the time to constantly answer the same questions. I also like helping others out and encourage them to ask questions. So that's what this thread is for. If you have questions about any product I sell, any product I fabricate, my build, my life or what I think of this-or-that, then this is the place. Feel free to ask anything, but I obviously reserve the right to not answer if it's too personal or just plain weird. My goal is to be able to re-route users back to this thread if they ask me a previously answered question in another thread, PM etc. I can just link to the particular post # that has the answer.... done! We can also talk about fabrication techniques and whatnot. Keep in mind, if you have a specific question about a product that I currently have in a vendor for sale thread, then obviously feel free to ask the question in the appropriate thread. Lets do this!
__________________

Follow Along For My Latest Work
My Portfolio
Please Share
Check Out My Builds

Last edited by Broadfield; 02-15-2012 at 10:51 PM..
Broadfield is offline   Reply With Quote
Sponsored Links
Old 02-15-2012, 08:03 PM   #2
innovation
Zilvia Junkie
 
innovation's Avatar
 
Join Date: Jul 2005
Location: Chino, CA
Posts: 437
Trader Rating: (3)
innovation is just really niceinnovation is just really niceinnovation is just really niceinnovation is just really niceinnovation is just really niceinnovation is just really niceinnovation is just really niceinnovation is just really niceinnovation is just really niceinnovation is just really nice
Feedback Score: 3 reviews
What would be your sub 100k (price range) dream car to modify?
innovation is offline   Reply With Quote
Old 02-15-2012, 11:13 PM   #3
Broadfield
Zilvia.net Advertiser
 
Broadfield's Avatar
 
Join Date: Oct 2006
Location: Normal, IL
Age: 47
Posts: 2,946
Trader Rating: (163)
Broadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to all
Feedback Score: 163 reviews
Quote:
Originally Posted by innovation View Post
What would be your sub 100k (price range) dream car to modify?
That's a really good question because it's actually very tough for me to answer. I'm the type of guy that would rather buy a $10k car and put $90k into it. That way I'm not driving some stock $100k car that every doctor, rich guy owns. But if I had the loot to buy a $100k car AND modify it, then I'm gonna go with a slightly used Porsche 997 911 Turbo.

Quote:
Originally Posted by S14DB View Post
Have you used any of the free-air subs that are designed to be used in the rear deck? Like the Kicker 10CVT654 for example.
Yes, especially back in the very early 90's. They will never perform as well as a subwoofer in a conventional enclosure setup, but there are obviously several advantages. The big one is no enclosure taking up space... and along with that the price of said enclosure. If you want a free-air sub I would recommend either FI or maybe some of the JL Audio free-air marine subs. The FI stuff is really good for a very reasonable amount of money. No matter which sub is chosen it's very important to make the mounting area is as rigid as possible. Basically you would be making a baffle out of 3/4" MDF and then screwed to the underside of the rear deck if possible. The subs would then mount to the underside of the MDF. You would also want to sound deaden the top of the rear deck and underside before you screw the MDF on. Then use as much power as the sub(s) will handle.
__________________

Follow Along For My Latest Work
My Portfolio
Please Share
Check Out My Builds
Broadfield is offline   Reply With Quote
Old 02-15-2012, 08:19 PM   #4
S14DB
AFC #1
 
S14DB's Avatar
 
Join Date: Oct 2003
Location: 昨晩あなたのお母さんの家
Posts: 20,181
Trader Rating: (3)
S14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfection
Feedback Score: 3 reviews
To keep this thread alive and not locked due to being a post whore thread. Lets keep it to his area's of expertise.

Any Random or Off-Topic questions will be deleted. If you aren't asking a question don't post unless you are Broadfield. Abuse will result in punishment.


Back to the thread:
Have you used any of the free-air subs that are designed to be used in the rear deck? Like the Kicker 10CVT654 for example.
__________________
Comments should be taken as Opinions not as Statements of Fact
S14DB is offline   Reply With Quote
Old 02-16-2012, 01:05 AM   #5
DS562
Zilvia FREAK!
 
DS562's Avatar
 
Join Date: Apr 2010
Location: Norwalk 90650
Posts: 1,151
Trader Rating: (7)
DS562 is an unknown quantity at this point
Feedback Score: 7 reviews
where did you acquire the automotive knowledge you possess?
__________________
Zeeeeeeeee32
DS562 is offline   Reply With Quote
Old 02-16-2012, 10:03 AM   #6
Broadfield
Zilvia.net Advertiser
 
Broadfield's Avatar
 
Join Date: Oct 2006
Location: Normal, IL
Age: 47
Posts: 2,946
Trader Rating: (163)
Broadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to all
Feedback Score: 163 reviews
Quote:
Originally Posted by DS562 View Post
where did you acquire the automotive knowledge you possess?
My father always taught me to do everything myself. If I didn't know how to do something I would simply teach myself. I believe people are just naturally good at things. For me it's anything to do with cars.... I'm also a pretty good artist. I have won many awards for various pieces of art in my earlier years. I have three bachelors degrees in physics, mathematics and applied computer science. However, I rarely use those in my line of work. So when it comes down to it, I believe I'm naturally good at what I do. On the flip side I'm a horrible cook.

Quote:
Originally Posted by sickstatus View Post
What sound system set up do you suggest in the $300-500 price range?
I need to know what all you want: head unit, speakers, amplifier, subwoofer?

Quote:
Originally Posted by Quail View Post
Do you believe that the weight of a properly installed sound system (trunk-mounted subwoofer included) would make any noticeable difference in the performance of a road car?
Absolutely not.... track car yes.
__________________

Follow Along For My Latest Work
My Portfolio
Please Share
Check Out My Builds
Broadfield is offline   Reply With Quote
Old 02-16-2012, 08:29 PM   #7
sickstatus
Zilvia FREAK!
 
sickstatus's Avatar
 
Join Date: Sep 2009
Location: SoCal
Age: 30
Posts: 1,539
Trader Rating: (15)
sickstatus is an unknown quantity at this point
Feedback Score: 15 reviews
Send a message via AIM to sickstatus
Quote:
Originally Posted by Broadfield View Post

I need to know what all you want: head unit, speakers, amplifier, subwoofer?


Speakers, amp, sub.

I bought a head unit from you but debating to get another one with Bluetooth.

Currently have new infinity kappas in front. But willing to buy new set up.
__________________
straights are for fast cars, corners are for fast drivers.
sickstatus is offline   Reply With Quote
Old 04-04-2013, 07:26 AM   #8
Broadfield
Zilvia.net Advertiser
 
Broadfield's Avatar
 
Join Date: Oct 2006
Location: Normal, IL
Age: 47
Posts: 2,946
Trader Rating: (163)
Broadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to all
Feedback Score: 163 reviews
Quote:
Originally Posted by Renee599 View Post
Is there a better way to add power and ground connections for accessory's such as gauges and stuff rather than tapping into the stock harness's?
Not really

Quote:
Originally Posted by hpipro4 View Post
dang you missed my question!

was referring to this:
Sorry, I do not. You could ask Chase.
__________________

Follow Along For My Latest Work
My Portfolio
Please Share
Check Out My Builds
Broadfield is offline   Reply With Quote
Old 08-14-2013, 07:46 PM   #9
Broadfield
Zilvia.net Advertiser
 
Broadfield's Avatar
 
Join Date: Oct 2006
Location: Normal, IL
Age: 47
Posts: 2,946
Trader Rating: (163)
Broadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to all
Feedback Score: 163 reviews
Quote:
Originally Posted by Darryl677 View Post
What sound system set up do you suggest in the $300-500 price range?
"Sound system" is a VERY loose phrase... you need to give me a little more to go on.
__________________

Follow Along For My Latest Work
My Portfolio
Please Share
Check Out My Builds
Broadfield is offline   Reply With Quote
Old 02-16-2012, 02:07 AM   #10
sickstatus
Zilvia FREAK!
 
sickstatus's Avatar
 
Join Date: Sep 2009
Location: SoCal
Age: 30
Posts: 1,539
Trader Rating: (15)
sickstatus is an unknown quantity at this point
Feedback Score: 15 reviews
Send a message via AIM to sickstatus
What sound system set up do you suggest in the $300-500 price range?
__________________
straights are for fast cars, corners are for fast drivers.
sickstatus is offline   Reply With Quote
Old 02-16-2012, 04:59 AM   #11
Quail
Zilvia FREAK!
 
Quail's Avatar
 
Join Date: Jul 2007
Location: UK
Age: 34
Posts: 1,378
Trader Rating: (1)
Quail is close to perfectionQuail is close to perfectionQuail is close to perfectionQuail is close to perfectionQuail is close to perfectionQuail is close to perfectionQuail is close to perfectionQuail is close to perfectionQuail is close to perfectionQuail is close to perfectionQuail is close to perfection
Feedback Score: 1 reviews
Send a message via MSN to Quail
Do you believe that the weight of a properly installed sound system (trunk-mounted subwoofer included) would make any noticeable difference in the performance of a road car?
__________________
Quail is offline   Reply With Quote
Old 02-16-2012, 09:54 AM   #12
Nicelyphe
Zilvia Addict
 
Nicelyphe's Avatar
 
Join Date: Jan 2010
Location: PA
Posts: 918
Trader Rating: (16)
Nicelyphe is an unknown quantity at this point
Feedback Score: 16 reviews
What are the possibilities to cut down on electric noise/motor noise through audio, for example a CarPC set-up. When the PC is OFF there is high frequencies coming from the speakers in relation to the amount of RPMs the motor is at.
Nicelyphe is offline   Reply With Quote
Old 02-16-2012, 05:57 PM   #13
Broadfield
Zilvia.net Advertiser
 
Broadfield's Avatar
 
Join Date: Oct 2006
Location: Normal, IL
Age: 47
Posts: 2,946
Trader Rating: (163)
Broadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to all
Feedback Score: 163 reviews
Quote:
Originally Posted by Nicelyphe View Post
What are the possibilities to cut down on electric noise/motor noise through audio, for example a CarPC set-up. When the PC is OFF there is high frequencies coming from the speakers in relation to the amount of RPMs the motor is at.
In my experience, which is a lot at this point, CarPC's usually have poor ground isolation. So I'm not surprised if you are having issues. Any decent car audio component will have good ground isolation properties. Which if installed correctly will lead to a noise free listening experience. In the case of the CarPC, the engineers didn't put as much focus on sound quality and noise rejection as much as what Alpine engineers would. So some simple questions first:
  • Did you run your RCA's for the amplifier down the opposite side of the vehicle from the power wire?
  • Where is your ground for the CarPC and the amplifier?
  • If you unplug the RCA's from the amplifier do you still have the noise?

Get back to me and we'll go from there.

Quote:
Originally Posted by biggie View Post
Since I've heard you have alarm knowledge.

A Circuit City installed alarm (Python I believe).

Worked fine, then 5speed swap happened. Ever since the doors lock themselves when the car is turned off, as well as locking back 1 second after you hit the unlock button on the key fob.

Would assume it was a wire going to the AT shifter or something, but I suck at wiring/electronics.
It has nothing to do with the transmission. I don't know what a 5-speed swap involves, but something got messed up, a wire pinched etc.

Do the doors lock correctly when you hit the lock button on the Python?

Quote:
Originally Posted by fyneyoungstunna View Post
You built a 240sx in the "post your interior thread" I have always wondered about the popup speedometer you had on there. have you ever come across one of the windshield units?
The unit I used was the Defi-Link VSD-X. Which was discontinued in 2010. The unit that displays on the windshield is the Defi-Link Display VSD Concept. Which was discontinued in 2007. You can find both of them on Ebay from time-to-time.

Quote:
Originally Posted by nissanfreak317 View Post
I have seen you "refinish" oem hard plastic interior pieces like door handles and stuff. Do you use some kind of polish for that? Mine are beat up and don't look nice at all anymore.

How about polishing the oem plastic cover for the gauge clusters?

Do you perform these tasks for money?
As for any hard plastic pieces, I simply clean them up and paint them with the SEM Color Coat product. I use either Landau Black or Satin Black. The charge would depend on what all you want done.

Polishing the cluster glass is a lot more work. I wet sand it inside and out with 1200 grit, then 1500 and finally 2000. I then polish both sides with an air polisher with four different stages of Pinnacle product... #4, #3, #2 and finishing with #1. I charge $50 to polish the glass.

Quote:
Originally Posted by ShakotanGazelle View Post
Do you think you can post some pictures of your notched RLCA setup to fit your 11j VSKFs on stock body? And what would be a good sound system setup (4 speakers, a sub and amplifier) for under 300?
The next time I have the wheel(s) off I will try to remember to snap a couple pics.

Quote:
Originally Posted by hobbs View Post
What type of flat/stain black paint do you use to finish interior pieces? I believe it's made by 3M?
I use the SEM Color Coat line... mainly Satin Black and Landau Black. They are very close to each other... the Landau Black is a tad bit richer.
__________________

Follow Along For My Latest Work
My Portfolio
Please Share
Check Out My Builds
Broadfield is offline   Reply With Quote
Old 02-16-2012, 07:19 PM   #14
Nicelyphe
Zilvia Addict
 
Nicelyphe's Avatar
 
Join Date: Jan 2010
Location: PA
Posts: 918
Trader Rating: (16)
Nicelyphe is an unknown quantity at this point
Feedback Score: 16 reviews
Quote:
Originally Posted by Broadfield View Post
In my experience, which is a lot at this point, CarPC's usually have poor ground isolation. So I'm not surprised if you are having issues. Any decent car audio component will have good ground isolation properties. Which if installed correctly will lead to a noise free listening experience. In the case of the CarPC, the engineers didn't put as much focus on sound quality and noise rejection as much as what Alpine engineers would. So some simple questions first:
  • Did you run your RCA's for the amplifier down the opposite side of the vehicle from the power wire?
  • Where is your ground for the CarPC and the amplifier?
  • If you unplug the RCA's from the amplifier do you still have the noise?

Get back to me and we'll go from there.
I'm running two amps, one for the front speakers and one for the subs. These two sets of RCA's go from in my glove box to underneath the center console and into the trunk. My battery is in the trunk, but the main power wire runs through the firewall then along the passenger side of the chassis, to the trunk.

The CarPC itself is a "Net-top" unit. Which for example here's a link to one just for reference.

ViewSonic - VOT132 - 2 GB RAM - 1.6 GHz

The unit I do not have a separate ground on, only ground I could think of is the ground that runs through the power adapter. [Looks like a laptop adapter] Which I have running to a cigarette lighter power source mounted under the dash.

The RCA's I have not attempted to unplug and see. I did run a switch in-between the remote signal wire of the amps so I can turn them off when the PC is off. That was the only thing I could think of to do to get rid of the noise while the PC is off. Would that kind of be my only route to go?
Nicelyphe is offline   Reply With Quote
Old 02-16-2012, 08:08 PM   #15
Broadfield
Zilvia.net Advertiser
 
Broadfield's Avatar
 
Join Date: Oct 2006
Location: Normal, IL
Age: 47
Posts: 2,946
Trader Rating: (163)
Broadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to all
Feedback Score: 163 reviews
Quote:
Originally Posted by Nicelyphe View Post
I'm running two amps, one for the front speakers and one for the subs. These two sets of RCA's go from in my glove box to underneath the center console and into the trunk. My battery is in the trunk, but the main power wire runs through the firewall then along the passenger side of the chassis, to the trunk.

The CarPC itself is a "Net-top" unit. Which for example here's a link to one just for reference.

ViewSonic - VOT132 - 2 GB RAM - 1.6 GHz

The unit I do not have a separate ground on, only ground I could think of is the ground that runs through the power adapter. [Looks like a laptop adapter] Which I have running to a cigarette lighter power source mounted under the dash.

The RCA's I have not attempted to unplug and see. I did run a switch in-between the remote signal wire of the amps so I can turn them off when the PC is off. That was the only thing I could think of to do to get rid of the noise while the PC is off. Would that kind of be my only route to go?
It sounds like it's just an issue with the CarPC. So since you can't change it, you can simply try some RCA noise filters. The downfall of these are that they remove low frequencies. However, since you are running subs and I assume the noise is only coming out of the front speakers, then you will be fine. Try this:

PAC SNI-1 - Ground loop isolator

Quote:
Originally Posted by KiLLeR2001 View Post
Extremely helpful, thank you Toby the super-genius.

More questions...

What products are you using the fill in the stock bezel? And where can I buy smoked plexiglass?
Very good question, because this stuff is the bees knees! I use two brands:
  • 3M Semi Rigid Plastic Repair
  • Norton Speed Grip

For the Norton I use the 1 minute and the 5 minute depending on how much working time I need with the product. You will need a special applicator gun that isn't cheap. However, I also used this gun when I did the seam sealer in my engine bay... so it can be used for the dispensing of various types of products. Pictured here if you need the part # of the gun:



I actually bought the smoked plexi from Menards... otherwise if your local super hardware store doesn't have it, you can buy it online.
__________________

Follow Along For My Latest Work
My Portfolio
Please Share
Check Out My Builds

Last edited by Broadfield; 02-24-2012 at 05:53 PM..
Broadfield is offline   Reply With Quote
Old 02-16-2012, 08:22 PM   #16
Nicelyphe
Zilvia Addict
 
Nicelyphe's Avatar
 
Join Date: Jan 2010
Location: PA
Posts: 918
Trader Rating: (16)
Nicelyphe is an unknown quantity at this point
Feedback Score: 16 reviews
Quote:
Originally Posted by Broadfield View Post
It sounds like it's just an issue with the CarPC. So since you can't change it, you can simply try some RCA noise filters. The downfall of these are that they remove low frequencies. However, since you are running subs and I assume the noise is only coming out of the front speakers, then you will be fine. Try this:

PAC SNI-1 - Ground loop isolator
Yes, noise only to the fronts. I'll be checking this out! Thank you.
Nicelyphe is offline   Reply With Quote
Old 02-16-2012, 08:29 PM   #17
KiLLeR2001
Post Whore!
 
Join Date: Jun 2007
Location: オーランドフロリダ
Posts: 7,955
Trader Rating: (46)
KiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud of
Feedback Score: 46 reviews
Quote:
Originally Posted by Broadfield View Post
Very good question, because this stuff is the bees knees! I use two brands:
  • 3M Semi Rigid Plastic Repair
  • Norton Speed Grip

For the Norton I use the 1 minute and the 5 minute depending on how much working time I need with the product. You will need a special applicator gun that isn't cheap. However, I also used this gun when I did the seam sealer in my engine bay... so it can be used for the dispensing of various types of products. Pictured here if you need the part # of the gun:

http://images116.fotki.com/v617/phot...MG_5837-vi.jpg

I actually bought the smoked plexi from Menards... otherwise if your local super hardware store doesn't have it, you can buy it online.
Mother of god I think I'm in thread heaven. Big thanks again. I'm starting a huge interior project on my car this summer and I've got lots of ideas already. I'll most likely be needing your services for a center vent gauge pod in a couple months.
__________________
KiLLeR2001 is offline   Reply With Quote
Old 02-17-2012, 07:27 AM   #18
biggie
Zilvia Junkie
 
Join Date: Sep 2002
Location: Winston Salem, NC
Age: 43
Posts: 484
Trader Rating: (3)
biggie is an unknown quantity at this point
Feedback Score: 3 reviews
Send a message via AIM to biggie
Quote:
Originally Posted by Broadfield View Post

It has nothing to do with the transmission. I don't know what a 5-speed swap involves, but something got messed up, a wire pinched etc.

Do the doors lock correctly when you hit the lock button on the Python?
Sorry for being slow on reply, but yes they lock fine with the button. Just when you push the unlock button they unlock and then lock back.

Was just thinking there was some kind of check on a P/N switch and that would cause the issue. Though in the 5spd swap the main P/N switch under the hood is jumped.
__________________
'11 M56S
'12 QX56 (wife's)
biggie is offline   Reply With Quote
Old 02-16-2012, 10:07 AM   #19
biggie
Zilvia Junkie
 
Join Date: Sep 2002
Location: Winston Salem, NC
Age: 43
Posts: 484
Trader Rating: (3)
biggie is an unknown quantity at this point
Feedback Score: 3 reviews
Send a message via AIM to biggie
Since I've heard you have alarm knowledge.

A Circuit City installed alarm (Python I believe).

Worked fine, then 5speed swap happened. Ever since the doors lock themselves when the car is turned off, as well as locking back 1 second after you hit the unlock button on the key fob.

Would assume it was a wire going to the AT shifter or something, but I suck at wiring/electronics.
__________________
'11 M56S
'12 QX56 (wife's)
biggie is offline   Reply With Quote
Old 02-16-2012, 10:47 AM   #20
fyneyoungstunna
Zilvia Addict
 
fyneyoungstunna's Avatar
 
Join Date: Jan 2005
Location: colorado springs
Posts: 722
Trader Rating: (0)
fyneyoungstunna is an unknown quantity at this point
Feedback Score: 0 reviews
You built a 240sx in the "post your interior thread" I have always wondered about the popup speedometer you had on there. have you ever come across one of the windshield units?
__________________
Can't Follow the Rules
STATEMENTS make me a Dumb-ass
fyneyoungstunna is offline   Reply With Quote
Old 02-16-2012, 11:23 AM   #21
nissanfreak317
Zilvia Junkie
 
nissanfreak317's Avatar
 
Join Date: Apr 2008
Location: Souderton, PA
Age: 35
Posts: 597
Trader Rating: (18)
nissanfreak317 is an unknown quantity at this point
Feedback Score: 18 reviews
I have seen you "refinish" oem hard plastic interior pieces like door handles and stuff. Do you use some kind of polish for that? Mine are beat up and don't look nice at all anymore.

How about polishing the oem plastic cover for the gauge clusters?

Do you perform these tasks for money?
__________________
WTB: S13 Silvia front pieces
Need: Hood, Fenders, Bumper, Headlights + brackets.

Have decent pop-up front to trade with oem hood + vis racing carbon fiber hood if interested.
nissanfreak317 is offline   Reply With Quote
Old 02-16-2012, 11:46 AM   #22
ShakotanGazelle
Zilvia Junkie
 
Join Date: Apr 2011
Location: DFW, TX
Posts: 514
Trader Rating: (2)
ShakotanGazelle is an unknown quantity at this point
Feedback Score: 2 reviews
Do you think you can post some pictures of your notched RLCA setup to fit your 11j VSKFs on stock body? And what would be a good sound system setup (4 speakers, a sub and amplifier) for under 300?
ShakotanGazelle is offline   Reply With Quote
Old 02-16-2012, 12:04 PM   #23
hobbs
Nissanaholic!
 
Join Date: Aug 2010
Location: Under a rock
Posts: 2,263
Trader Rating: (43)
hobbs is on a distinguished road
Feedback Score: 43 reviews
What type of flat/stain black paint do you use to finish interior pieces? I believe it's made by 3M?
hobbs is offline   Reply With Quote
Old 02-16-2012, 06:12 PM   #24
KiLLeR2001
Post Whore!
 
Join Date: Jun 2007
Location: オーランドフロリダ
Posts: 7,955
Trader Rating: (46)
KiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud of
Feedback Score: 46 reviews
I PM'd you this yesterday but I'll post it here so there won't be a repeat question...

I was browsing through the interior thread and noticed a digital fuel gauge you did for somebody...

http://tehl33tsite.com/240sxdd/help/digifuel.jpg

My first question to you is, where can I find a gauge like this that will display fuel in either % remaining or gallons remaining? I tried looking online and can't really find anything.

Question #2. I plan on locating it here...

http://tehl33tsite.com/240sxdd/help/fuelloc.jpg

But I'm not sure if there is enough space on the top region to place a circular gauge since I only want to expose the digital number through that section in form of a rectangle.

Any tips or tricks to go about this little project would be much appreciated.

Thanks.
__________________
KiLLeR2001 is offline   Reply With Quote
Old 02-16-2012, 06:49 PM   #25
Broadfield
Zilvia.net Advertiser
 
Broadfield's Avatar
 
Join Date: Oct 2006
Location: Normal, IL
Age: 47
Posts: 2,946
Trader Rating: (163)
Broadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to all
Feedback Score: 163 reviews
Quote:
Originally Posted by KiLLeR2001 View Post
I PM'd you this yesterday but I'll post it here so there won't be a repeat question...

I was browsing through the interior thread and noticed a digital fuel gauge you did for somebody...

http://tehl33tsite.com/240sxdd/help/digifuel.jpg

My first question to you is, where can I find a gauge like this that will display fuel in either % remaining or gallons remaining? I tried looking online and can't really find anything.

Question #2. I plan on locating it here...

http://tehl33tsite.com/240sxdd/help/fuelloc.jpg

But I'm not sure if there is enough space on the top region to place a circular gauge since I only want to expose the digital number through that section in form of a rectangle.

Any tips or tricks to go about this little project would be much appreciated.

Thanks.
I officially like the Autometer one because it's the only one that I have seen that is fully programmable to match whatever sending unit you are using:

Auto Meter



I like to mount them behind smoked plexi. I also disassemble the gauge and paint the inside all black. Otherwise you may see some of the white text though the plexi.

I have done several setups with various techniques:

This first setup is the easiest:








This method is much more difficult because I first had to fill in the spot where the OEM switch was:

Build pics here:

Josh's S13 Cluster, HUD, Center Vent and Cluster Shroud album | Broadfield | Fotki.com, photo and video sharing made easy.







Then an AEM air/fuel gauge I did in an STi:

Build pics here:

Mike Defalco's Vent Gauge STi album | Broadfield | Fotki.com, photo and video sharing made easy.









Quote:
Originally Posted by waxball88 View Post
Will i one day be as great as you?
That's entirely up to you.... but good luck
__________________

Follow Along For My Latest Work
My Portfolio
Please Share
Check Out My Builds
Broadfield is offline   Reply With Quote
Old 02-16-2012, 07:52 PM   #26
KiLLeR2001
Post Whore!
 
Join Date: Jun 2007
Location: オーランドフロリダ
Posts: 7,955
Trader Rating: (46)
KiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud of
Feedback Score: 46 reviews
Quote:
Originally Posted by Broadfield View Post
I officially like the Autometer one because it's the only one that I have seen that is fully programmable to match whatever sending unit you are using:

Auto Meter

[IMG]

I like to mount them behind smoked plexi. I also disassemble the gauge and paint the inside all black. Otherwise you may see some of the white text though the plexi.

I have done several setups with various techniques:

This first setup is the easiest:

[IMG]

This method is much more difficult because I first had to fill in the spot where the OEM switch was:

Build pics here:

Josh's S13 Cluster, HUD, Center Vent and Cluster Shroud album | Broadfield | Fotki.com, photo and video sharing made easy.

[IMG]

Then an AEM air/fuel gauge I did in an STi:

Build pics here:

Mike Defalco's Vent Gauge STi album | Broadfield | Fotki.com, photo and video sharing made easy.

[IMG]
Extremely helpful, thank you Toby the super-genius.

More questions...

What products are you using the fill in the stock bezel? And where can I buy smoked plexiglass?
__________________
KiLLeR2001 is offline   Reply With Quote
Old 02-29-2012, 09:19 AM   #27
slim
Zilvia Member
 
slim's Avatar
 
Join Date: Jul 2005
Location: denver
Posts: 240
Trader Rating: (5)
slim is an unknown quantity at this point
Feedback Score: 5 reviews
so i am in the process of aquiring an 06-07 sti. want to do the same thing u did to this one. would you be able to do this without the car, just the gauge and vent? or is it nessecary to test fit during the process? if this is possible ill send you a pm for a quote after i actually pick one up. thanks in advance. love your work always impressive!!!

__________________

07 ugm STi-07 titan se-99 civic si sold-92 sil coupe-89 240 hatch
slim is offline   Reply With Quote
Old 03-01-2012, 08:36 PM   #28
Broadfield
Zilvia.net Advertiser
 
Broadfield's Avatar
 
Join Date: Oct 2006
Location: Normal, IL
Age: 47
Posts: 2,946
Trader Rating: (163)
Broadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to all
Feedback Score: 163 reviews
Quote:
Originally Posted by slim View Post
so i am in the process of aquiring an 06-07 sti. want to do the same thing u did to this one. would you be able to do this without the car, just the gauge and vent? or is it nessecary to test fit during the process? if this is possible ill send you a pm for a quote after i actually pick one up. thanks in advance. love your work always impressive!!!
I would need the car unfortunately. It's a VERY tight fit and I would need to make sure the gauge is perfectly straight up and down with the silver trim ring... which I can only do by setting it in the car for a test fit and then adjust accordingly.

Quote:
Originally Posted by chiboy002 View Post
damn thats a good deal
Thanks Toby!
You know I got your back!

Quote:
Originally Posted by titopr06 View Post
hey toby,

is the process of upholstering the s14 door cards the same as the s13? Is it the same material?

thanks!
Definitely not, but I have never done an S14 card. I do know the S14 cards are cake to do though.

Quote:
Originally Posted by Seraphim38 View Post
Have you ever used a surface mount universal pod to mount on the kick panels of a 240sx? Maybe for mounting a 5 1/4 or 4" mid for added midrange / sound stage? It would have to be a woofer that is not too deep, as I don't really want to relocate my ECU and other stuff housed behind the kick panels
No, I have never used universal pods. That would go against everything I strive for. I always custom fiberglass kicks for whatever the car may be. Here is a set I did for my demo car in the store. I also made custom press fit, flush, black grill cloth covered grills that are not pictured. I actually made these kicks 16 years ago. I just had them out of the car because I put a fresh set of Hybrid Audio Legatia speakers in them. In the kick is a Legatia 4" and Legatia tweeter. The door houses the Legatia 7.1" midbass driver.







__________________

Follow Along For My Latest Work
My Portfolio
Please Share
Check Out My Builds
Broadfield is offline   Reply With Quote
Old 07-22-2013, 12:24 PM   #29
Sgtnubcakes
 
Join Date: Oct 2011
Location: So Cal
Age: 29
Posts: 48
Trader Rating: (2)
Sgtnubcakes is an unknown quantity at this point
Feedback Score: 2 reviews
Quote:
Originally Posted by Broadfield View Post
I officially like the Autometer one because it's the only one that I have seen that is fully programmable to match whatever sending unit you are using:

Auto Meter


I like to mount them behind smoked plexi. I also disassemble the gauge and paint the inside all black. Otherwise you may see some of the white text though the plexi.

I have done several setups with various techniques:

This first setup is the easiest:


Do you have a walk through on how to disassemble the gauge or advice on how to do it? I noticed that you used duct tape on the gauge when you were done, is this used because of disassembling it?

Thanks.

Sgtnubcakes is offline   Reply With Quote
Old 07-22-2013, 02:15 PM   #30
Broadfield
Zilvia.net Advertiser
 
Broadfield's Avatar
 
Join Date: Oct 2006
Location: Normal, IL
Age: 47
Posts: 2,946
Trader Rating: (163)
Broadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to all
Feedback Score: 163 reviews
The duct tape is just an easy way to hold the gauge items together since for that type of install I do away with the bezel.... which holds all of the gauge parts together. In the install I'm posting pictures of below, you can see how the duct tape was used to hold the smoked piece of plexi on there also:





The finished results:





i don't have a writeup, but I do have a nice set of pictures that you can follow and see how I did it. In this particular setup I did for a friend's STi, I ground the gauge bezel down so I didn't need to use duct tape. But this install is completely different since I made a "housing" for the AEM wideband gauge to sit in and then attached the housing to the back of the vent trim:





























__________________

Follow Along For My Latest Work
My Portfolio
Please Share
Check Out My Builds
Broadfield is offline   Reply With Quote
Reply

Bookmarks

Tags
broadfield, toby


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:45 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™