how to jump a s14 power window motor - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

aznsquad · 06-11-2012, 04:11 PM

hello, i think my power window motor/solinoid took a crap.
I attached a wire from the positive battery terminal to the 2 wire connector going to the motor (on the passenger side door skin), I tried both of the terminals (1 goes up and 1 goes down) and neither one of them worked.

Am I jumping the window motor correctly? If so, I guess the motor is dead?

thanks!

imcunner · 06-11-2012, 04:17 PM

Motor is prob dead

doitsidewayz · 06-11-2012, 04:47 PM

Yup. your motor is dead.

Copilot911 · 06-11-2012, 10:32 PM

Did you remember to attach a wire to the negative battery terminal as well?

ReLiC · 06-11-2012, 10:54 PM

I don't think you're jumping it correctly. On my old s13 i had to put power to the window AMP. I believe the AMP works the same way as having a relay. I'm not 100% sure if this is right, but i tried different variations in that 2 wire plug (i didn't care about the motor), and i remember i had to put power in one wire, while grounding the other (**NOT SURE**) and switching it around would do the opposite to the window. Again, i'm not sure about this, so don't try it yet. Do a bit more research and you'll find what i'm talking about.

twyztidmind · 06-11-2012, 11:44 PM

If you look at the plug for the Window motor itself (2 Wires), unplug it from the main harness and run a positive current to one wire and ground to the other. Switching the positive / ground will make it either go up or down.

blueshark123 · 06-12-2012, 07:39 AM

Is this your passenger side or driver. If its passenger they dont have a amp so its either u have the windows locked which you should have checked it i assume or its the window motor. If u need a new passenger window motor lmk i have one i can ship it asap.

cmg · 06-12-2012, 07:50 AM

Quote:

Originally Posted by twyztidmind

If you look at the plug for the Window motor itself (2 Wires), unplug it from the main harness and run a positive current to one wire and ground to the other. Switching the positive / ground will make it either go up or down.

This. If you simply run power to one wire the circuit is still open. Blue/red stripe to 12+ and blue to negative is down. Blue to 12+ and blue/ red stripe to negative is up. I do this everytime I drive my car with a electric impact battery.

ontariogreenbeast · 07-09-2012, 12:03 PM

......mmmm

ontariogreenbeast · 07-09-2012, 12:06 PM

Quote:

Originally Posted by blueshark123

Is this your passenger side or driver. If its passenger they dont have a amp so its either u have the windows locked which you should have checked it i assume or its the window motor. If u need a new passenger window motor lmk i have one i can ship it asap.

im looking for a passenger side window motor for my 97 240sx. and I noticed your post. Wondering if you still had this part for sale? Lemme know.

06-11-2012, 04:11 PM	#1
aznsquad Leaky Injector Join Date: Mar 2005 Location: Can Posts: 53 Trader Rating: (2) Feedback Score: 2 reviews	how to jump a s14 power window motor hello, i think my power window motor/solinoid took a crap. I attached a wire from the positive battery terminal to the 2 wire connector going to the motor (on the passenger side door skin), I tried both of the terminals (1 goes up and 1 goes down) and neither one of them worked. Am I jumping the window motor correctly? If so, I guess the motor is dead? thanks!

06-11-2012, 11:44 PM	#6
twyztidmind Zilvia Member Join Date: Sep 2004 Location: Kansas Age: 33 Posts: 239 Trader Rating: (23) Feedback Score: 23 reviews	If you look at the plug for the Window motor itself (2 Wires), unplug it from the main harness and run a positive current to one wire and ground to the other. Switching the positive / ground will make it either go up or down. __________________ I have LOTS of S13 and S14 Parts, PM me!

07-09-2012, 12:03 PM	#9
ontariogreenbeast Join Date: Jul 2012 Location: Ontario, California Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	...mmmm ......mmmm

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-11-2012, 04:17 PM	#2
imcunner Zilvia Junkie Join Date: Jan 2009 Location: :) Age: 32 Posts: 419 Trader Rating: (12) Feedback Score: 12 reviews	Motor is prob dead

06-11-2012, 04:47 PM	#3
doitsidewayz Zilvia Addict Join Date: Jul 2011 Location: -_______- Posts: 714 Trader Rating: (1) Feedback Score: 1 reviews	Yup. your motor is dead.

06-11-2012, 10:32 PM	#4
Copilot911 Leaky Injector Join Date: Dec 2009 Location: Victoria, BC Posts: 118 Trader Rating: (0) Feedback Score: 0 reviews	Did you remember to attach a wire to the negative battery terminal as well?

06-11-2012, 10:54 PM	#5
ReLiC Zilvia Addict Join Date: Jun 2007 Location: la puente Age: 33 Posts: 862 Trader Rating: (13) Feedback Score: 13 reviews	I don't think you're jumping it correctly. On my old s13 i had to put power to the window AMP. I believe the AMP works the same way as having a relay. I'm not 100% sure if this is right, but i tried different variations in that 2 wire plug (i didn't care about the motor), and i remember i had to put power in one wire, while grounding the other (NOT SURE) and switching it around would do the opposite to the window. Again, i'm not sure about this, so don't try it yet. Do a bit more research and you'll find what i'm talking about.

06-12-2012, 07:39 AM	#7
blueshark123 Post Whore! Join Date: Apr 2006 Location: North Jersey Posts: 5,481 Trader Rating: (55) Feedback Score: 55 reviews	Is this your passenger side or driver. If its passenger they dont have a amp so its either u have the windows locked which you should have checked it i assume or its the window motor. If u need a new passenger window motor lmk i have one i can ship it asap.