Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 10-27-2020, 07:20 AM   #1
kaytlin.240.love
 
Join Date: Oct 2013
Location: Tampa
Age: 28
Posts: 10
Trader Rating: (0)
kaytlin.240.love is an unknown quantity at this point
Feedback Score: 0 reviews
Digital display. Can I do it with stock ecu????? Ijz from a jzx100 in my s13

I have an s13 with a 1j vvti from a jzx100 in it and I can't decide how to do my gauges.
I want/need tach, speedo, fuel level, water temp, oil pressure, boost, afr.... I think that's it

There are alot of really neat options for clusters but the ones I've seen all need a stand alone and I'm already over my budget for this build and can't afford another 3k for display and ecu. The car had crappy glowshift gauges for everything but they all do not properly display data and I dont trust them with the new motor.
kaytlin.240.love is offline   Reply With Quote
Sponsored Links
Old 10-27-2020, 10:08 AM   #2
Krusty_s13
Zilvia Addict
 
Krusty_s13's Avatar
 
Join Date: May 2008
Location: Miami, FL
Posts: 862
Trader Rating: (0)
Krusty_s13 is just really niceKrusty_s13 is just really niceKrusty_s13 is just really niceKrusty_s13 is just really niceKrusty_s13 is just really niceKrusty_s13 is just really niceKrusty_s13 is just really niceKrusty_s13 is just really niceKrusty_s13 is just really niceKrusty_s13 is just really nice
Feedback Score: 0 reviews
Quote:
Originally Posted by kaytlin.240.love View Post
I have an s13 with a 1j vvti from a jzx100 in it and I can't decide how to do my gauges.
I want/need tach, speedo, fuel level, water temp, oil pressure, boost, afr.... I think that's it

There are alot of really neat options for clusters but the ones I've seen all need a stand alone and I'm already over my budget for this build and can't afford another 3k for display and ecu. The car had crappy glowshift gauges for everything but they all do not properly display data and I dont trust them with the new motor.
There are some options for aftermarket displays that tap into the factory signals. Autometer invision for example. That will take care of speed/tach/oil press/water temp/volt/fuel. The rest of what you need can come from auxiliary guages. I don't think there is a display that will take care of all of those parameters without needing an aftermarket ecu, I could be wrong though.
__________________
Krusty_s13 is offline   Reply With Quote
Old 10-30-2020, 11:03 AM   #3
crash n' burn
Zilvia Junkie
 
crash n' burn's Avatar
 
Join Date: Sep 2012
Location: Colorado
Age: 32
Posts: 505
Trader Rating: (11)
crash n' burn is on a distinguished road
Feedback Score: 11 reviews
Quote:
Originally Posted by kaytlin.240.love View Post
I have an s13 with a 1j vvti from a jzx100 in it and I can't decide how to do my gauges.
I want/need tach, speedo, fuel level, water temp, oil pressure, boost, afr.... I think that's it

There are alot of really neat options for clusters but the ones I've seen all need a stand alone and I'm already over my budget for this build and can't afford another 3k for display and ecu. The car had crappy glowshift gauges for everything but they all do not properly display data and I dont trust them with the new motor.
All of these things can be done with a stock ECU. You'll just need gauges and senders wired up. I have a 110 but I'll toss in how I'm doing things.

I'm pretty sure the JZX100 has 2 both aren't both used, but my 110 had a spot for a water temp sender in the upper water neck. while I'm still using my stock cluster, I also have a bung in my radiator for my aftermarket gauge but it could easily go in the water neck as well.

Oil pressure, you can run a sandwich plate to add the sensor

Boost is self explanatory. Once you get rid of the fuel dampener, you will have an open port for a source

AFR, obviously in an aftermarket downpipe

I have a BT100 to handle speedo as well as tach conversion. Speedo is created through a GPS receiver (but plenty of options exist for that as well depending on your trans)

Fuel, you'll just have to tap in to the original wiring and the gauge can be programed for what the float reads throughout it's range

6 gauges can be powered by a single 30amp relay if you're not keeping the stock wiring harness. Tight Fit Fab on here actually makes a gauge cluster pigtail for aftermarket stuff that's really good and should make this a breeze to set up so you don't have 8 sub harnesses trying to be tucked up behind the dash to the cluster hood.
__________________
@jz_2tone
crash n' burn is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:56 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™