TX S13 SR motor part out everything must go!! extras and upgrades - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

RurouniMidnight · 10-22-2009, 07:43 PM

So i spun a bearing in my motor at Lonestar Bash...

im selling everything off of it heres the list ill try and take pictures as i go and post them up for the parts, my baby gave me years of enjoyment but i want to try out a different setup. If there is anything i didn't list that you might be intrested in that can be shipped pm me and ill let you know. All prices include shipping but please include 3% paypal fee Thanks.

Greddy turbo elbow $110

Kazama auto Catch can, for use with fan shroud $100

Hallman RX pro manual boost controller $70

Nismo motor and tranny mounts Sold
Lightweight aluminum pullys were red kinda pink now Sold
F1 14lb chromoly flywheel $90

Spec stage 3 clutch has about 65% life left pressure plate springs are all good $190

Custom painted valve cover by Richard Rabe out in cali, small wear spot from hood $120

Tomei orniment plate Sold
Tomei rocker arm stoppers Sold
Tomei oil cap Sold
Converted engine harness for S14 with s13 SR ready to rock $250 Pending
#62 redtop ecu $80
sr alternator SOLD
sr starter SOLD
4 clean coil packs no harness $80

4 370cc injectors w/ new oem rail Pending

iacv $70
intake mani $30
CAS Sold
Timing chain tensioner $40

circut sport stainless bottom mount turbo lines Sold
T25 inlet and outlet pipes $40
Nismo thermostat $20

KA powersteering pump Sold
Aluminum intake pipe with couplers and clamps Sold
S13 SR maf $40
Water neck temp sensor adaptor $45

RurouniMidnight · 10-23-2009, 11:24 PM

updated, added a few more pics.

JrockS13 · 10-25-2009, 04:09 AM

I'll take the thermostat and are you nego. on the clutch i think 220 is too much for a used clutch..lmk

kevmeistah21 · 10-25-2009, 04:41 AM

do you still have the stock t25? also interested in pulleys

TurboDaytona · 10-25-2009, 09:17 AM

I will take the pulleys.. Let me know where to paypal.

RurouniMidnight · 10-25-2009, 10:38 AM

Quote:

Originally Posted by JrockS13

I'll take the thermostat and are you nego. on the clutch i think 220 is too much for a used clutch..lmk

Pmed

Quote:

Originally Posted by kevmeistah21

do you still have the stock t25? also interested in pulleys

T25 is blown the pulleys are pending right now, ill let you know.

JoshDank · 10-25-2009, 10:52 AM

i'll take the intake pipe if you still have it on Wednesday

docrez · 10-25-2009, 10:27 PM

I'll thake the CAS shipped to 92308?

kaking · 10-26-2009, 12:48 AM

ill take the intake pipe with couplers, i have money now

ReLevent1 · 10-27-2009, 09:54 PM

payment sent for turbo lines and ras.

RurouniMidnight · 10-30-2009, 02:59 PM

dropped the prices on everything left and updated parts that were sold need to move it all haha.

TurboDaytona · 10-31-2009, 07:26 AM

Hey, i bought the pulleys from him. exactly as described, and fast shipping. Good seller!

bui · 10-31-2009, 11:18 AM

Bump for my friend Justin!

GLWS!

vash_S14 · 10-31-2009, 11:57 AM

Ill take the Greddy elbow for $100, shipped to 90815? LMK, TIA!

10-22-2009, 07:43 PM	#1
RurouniMidnight Zilvia FREAK! Join Date: Feb 2004 Location: Houston TX Age: 38 Posts: 1,245 Trader Rating: (12) Feedback Score: 12 reviews	S13 SR motor part out everything must go!! extras and upgrades So i spun a bearing in my motor at Lonestar Bash... im selling everything off of it heres the list ill try and take pictures as i go and post them up for the parts, my baby gave me years of enjoyment but i want to try out a different setup. If there is anything i didn't list that you might be intrested in that can be shipped pm me and ill let you know. All prices include shipping but please include 3% paypal fee Thanks. Greddy turbo elbow $110 Kazama auto Catch can, for use with fan shroud $100 Hallman RX pro manual boost controller $70 Nismo motor and tranny mounts Sold Lightweight aluminum pullys were red kinda pink now Sold F1 14lb chromoly flywheel $90 Spec stage 3 clutch has about 65% life left pressure plate springs are all good $190 Custom painted valve cover by Richard Rabe out in cali, small wear spot from hood $120 Tomei orniment plate Sold Tomei rocker arm stoppers Sold Tomei oil cap Sold Converted engine harness for S14 with s13 SR ready to rock $250 Pending #62 redtop ecu $80 sr alternator SOLD sr starter SOLD 4 clean coil packs no harness $80 4 370cc injectors w/ new oem rail Pending iacv $70 intake mani $30 CAS Sold Timing chain tensioner $40 circut sport stainless bottom mount turbo lines Sold T25 inlet and outlet pipes $40 Nismo thermostat $20 KA powersteering pump Sold Aluminum intake pipe with couplers and clamps Sold S13 SR maf $40 Water neck temp sensor adaptor $45 __________________ http://nightparade.wordpress.com/ Join in on instagram @nightparade Last edited by RurouniMidnight; 10-30-2009 at 06:01 PM..

10-23-2009, 11:24 PM	#2
RurouniMidnight Zilvia FREAK! Join Date: Feb 2004 Location: Houston TX Age: 38 Posts: 1,245 Trader Rating: (12) Feedback Score: 12 reviews	updated, added a few more pics. __________________ http://nightparade.wordpress.com/ Join in on instagram @nightparade

10-25-2009, 04:41 AM	#4
kevmeistah21 Post Whore! Join Date: Dec 2007 Location: Pasadena, CA Age: 31 Posts: 2,658 Trader Rating: (68) Feedback Score: 68 reviews	do you still have the stock t25? also interested in pulleys __________________ Late Night Crew... #02 <3 Bought anything from me? Please leave me a review! http://zilvia.net/f/private-sellers/...meistah21.html

10-27-2009, 09:54 PM	#10
ReLevent1 Zilvia Junkie Join Date: Dec 2003 Location: ELk Grove/San Jose Age: 34 Posts: 343 Trader Rating: (1) Feedback Score: 1 reviews	payment sent for turbo lines and ras. __________________ Don't be such a Mc I BE HERRA JERIFTINZ

10-30-2009, 02:59 PM	#11
RurouniMidnight Zilvia FREAK! Join Date: Feb 2004 Location: Houston TX Age: 38 Posts: 1,245 Trader Rating: (12) Feedback Score: 12 reviews	dropped the prices on everything left and updated parts that were sold need to move it all haha. __________________ http://nightparade.wordpress.com/ Join in on instagram @nightparade

10-25-2009, 04:09 AM	#3
JrockS13 Leaky Injector Join Date: Aug 2009 Location: Texas, Pflugerville Age: 36 Posts: 97 Trader Rating: (10) Feedback Score: 10 reviews	I'll take the thermostat and are you nego. on the clutch i think 220 is too much for a used clutch..lmk

10-25-2009, 09:17 AM	#5
TurboDaytona Zilvia Member Join Date: Apr 2006 Location: Kansas City, MO Posts: 204 Trader Rating: (2) Feedback Score: 2 reviews	I will take the pulleys.. Let me know where to paypal.

10-25-2009, 10:52 AM	#7
JoshDank Leaky Injector Join Date: Jul 2009 Location: Orlando, FL Posts: 106 Trader Rating: (1) Feedback Score: 1 reviews	i'll take the intake pipe if you still have it on Wednesday

10-25-2009, 10:27 PM	#8
docrez Zilvia Member Join Date: Nov 2008 Location: Killeen, Tx Age: 36 Posts: 151 Trader Rating: (5) Feedback Score: 5 reviews	I'll thake the CAS shipped to 92308?

10-26-2009, 12:48 AM	#9
kaking Users Awaiting Email Confirmation Join Date: Apr 2007 Location: san jose CA Posts: 433 Trader Rating: (7) Feedback Score: 7 reviews	ill take the intake pipe with couplers, i have money now

10-31-2009, 07:26 AM	#12
TurboDaytona Zilvia Member Join Date: Apr 2006 Location: Kansas City, MO Posts: 204 Trader Rating: (2) Feedback Score: 2 reviews	Hey, i bought the pulleys from him. exactly as described, and fast shipping. Good seller!

10-31-2009, 11:18 AM	#13
bui Leaky Injector Join Date: Oct 2008 Location: Angleton, TX Posts: 93 Trader Rating: (0) Feedback Score: 0 reviews	Bump for my friend Justin! GLWS!

10-31-2009, 11:57 AM	#14
vash_S14 Join Date: Sep 2009 Location: Long Beach Posts: 32 Trader Rating: (2) Feedback Score: 2 reviews	Ill take the Greddy elbow for $100, shipped to 90815? LMK, TIA! Last edited by vash_S14; 10-31-2009 at 07:45 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode